Similar Questions

• After the upgrade to Firefox 12.0 on Ubuntu 10.04.1 LTS, Youtube guest for a plugin installation, but said then there is zero, so what would make Firefox work aga?

  After upgrading to Firefox 12.0 on Ubuntu 10.04.1 LTS, the viewing of videos, such as Youtube has stopped working. By clicking on the "Install Plugin" offered instead, gives the answer "no appropriate plugin was found." By clicking on the "read more...". Manual plugin install"link collects only the answer"we're sorry, but we are unable to find what you are looking for dedicated", of Mozilla.org.

  There is a simple work around this failure to upgrade?
  (Or at least some information about the question to know if a plugin for Linux is available somewhere?)

  You need Flash to play videos on youtube. See the following articles:

  • Install the Flash plugin to display videos, animations and games
  • Clear the Cache and Cookies

  For more information on the Firefox plugins, see this article-> use plugins for playing audio, video, games, etc.

  Check and tell if its working.

• How to make the image map CC 2014 after the upgrade? the pointer icon unresponsive.

  I am doing a map image by clicking on the icon ferramento point, but no longer works. What should I do? I need help!

  Fazer EU estou tentando um mapa imagem, clicando no ponto ferramento, mas nao works but icon. O that devo fazer? I need urgent help!

  Switch to the Design mode.  See screenshot.

  

  Nancy O.

• CVD reference is missing the installation of Windows 7 Image option in MIrage Client after the upgrade to 5.0 Mirage

  Prior to the release and the Mirage 5.0 upgrade, I had a CVD of reference created. I did 5 revisions to the Base layer on the MCV Ref. After each change, I clic click straight on Mirage Client icon, select Tools and then run "Installation of Image of Windows 7. Then I go back to the Console and capture a layer of existing base of CVD Ref. has worked like a charm.

  Since the upgrade to Mirage 5.0 and after the installation of the new client on the MCV Ref, the installation of Windows 7 Image tool is missing. If I try to capture the base in any case layer, it crashes. I checked the logs and he returns with "Execution dock could not be completed" and never captures the base layer.

  I have uninstalled/reinstalled the client on the MCV Ref.

  I have removed the Ref CVD of inventory and created again.

  Still cannot capture the base layer.

  The next thing im going to do is flatten the CVD Ref and available with a base previous output layer and see what happens.

  BTW, this happens on two Ref CVD I created. for example a team lead Ref CVD and another is a Call Center Ref CVD.

  any ideas?

  The only way I could get my MCV reference existing (before Mirage 5.0 upgrade), to capture a Base Layer (after changing new) without having to rebuild my reference Image from zero has been to Sysprep the machine and capture with WDS. I removed the Mirage customer before sysprepping. Then deleted the CVD the stock updated Ref waiting and then I rejected the device pending and removed from CVDs rejected.

  Then was to bring the return of WDS Sysprep image and install the Mirage Client and create a new MCV Ref. I made a few changes and was able to capture the base instantly layer. I will now do the same for the rest of my pre Mirage 5.0 Ref CVDs. I had 3 Ref CVD anyway. If they were not complex images, I would of just them rebuilt from scratch.

  I'm happy to finish with WDS, so much easier to make changes to the images on Mirage.

  Hope this helps someone else with the same number of "Execution of Shim failed to Complete" when revisions to images on Ref CVD after the upgrade to the Mirage Server 5.0

• Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My laptop camera image on the upside after the upgrade to Windows 7 Professional 64-bit.

  I have a laptop Asus G50Vt - X 1, which is a 64-bit computer. It had Windows Vista Home Premium 64-bit installed on it and the unit worked properly with him. I ran the update of Windows 7 Advisory on this matter and he said I could upgrade to Windows 7 64 bit. After the upgrade to Windows 7 Professional 64 bit the images from the camera are all upside. I contacted Asus about the problem and they sent me the drivers updated, but the images are still upside down. Pourrait Windows 7 cause this problem as I know that it worked fine under Vista?

  I also noticed that my dvd/cd player and external hard drives don't stop the execution after that I have quit an application. When this happens, I can't eject the cd or remove the drive from the computer.

  Windows Update has nothing to do with the upgrade of Windows. Post future questions in one of these forums, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the upgrade to El Capitan, my iMac is very slow.

  I've recently upgraded to El Capitan 10.11.3 on my iMac (Mid2011). I have a cyber-security ESET Pro installed 6.1.12.0. After the upgrade I have trouble with the speed of the m/c and the startup takes a lot of time. I can't use my Photos and export pictures to google reader. I tried to disable the antivirus change, not much. Thanks in advance for any help.

  Better to uninstall completely any anti-virus protection and all the apps 'cleaner '.

  most people here will agree that there is no need of these

  also make sure you have enough RAM 4 GB is really minimal.

  and look for updates for third-party applications that you have installed.

• Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

  Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

  Just what do slow down? Rotation beach balls?

  Run and view the results here so that we know more about your configuration.

  http://etrecheck.com/

  EtreCheck

  https://discussions.Apple.com/docs/doc-6172

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

  After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

  1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

  If you have an ATI card, then you're stuck with a proportional image: P
  

• After the upgrade from Vista to Windows 7 games installed in my laptop (Chainz, Cubis and Bejeweled, etc.) have bars on each side when displayed in full screen.

  I have a laptop Acer Aspire with a screen 16:9 wide (15.6 "), it has the latest graphic drivers ATI and all operating system updates.  After the upgrade to W7 (free upgrade with the purchase of the laptop) everything works wonderfully except all the games installed now not displayed in full screen, I get black bars on both sides, they used for Vista, but not with W7.

  I already tried different settings in the games options, administrator, resolutions screen different, being run in maximized 'Vista' and 'Run' mode of the file properties dialog box shortcut and .exe.  This happened without any security program installed that is not a factor.

  I am at a loss.

  This is to maintain the ratio l / h. It is how the images stretch. ATI no longer has the opportunity to play with the proportions for the sort of stuck like that unless you can find in your version of ATI Catalyst. It is in fact full screen as opposed to windowed mode, but it does not cover the entire screen.

  You can try different resolutions within the application to see if it will actually make your apps full screen to use the entire screen. That's all, remains to be done. I don't know why ATI has decided to exclude this option because some people hate the black bars or hate the stretched images.

• Unable to activate Windows 7 Pro after the upgrade of the system

  Old Config: Celeron / 2 GB / 40 GB. -Win7Pro retail trade / retail Office10H & B

  New Config: i3 / 2GB / 500GB. -Win7Pro retail trade / retail Office10H & B

  Windows worked perfect (but slow). I have updated the comp & installed fresh from the same media. Old hard drive is formatted. Office activated. but windows gives the error "the product key you entered cannot be used to activate windows on this computer". I tried the online activation & the phone activation. for only informed 10 days for activation. Help, please.

  Try the phone activation once again:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If this does not work, try direct telephone activation:

  Direct activation number: (888) 725-1047

  1-800-936-5700

  If the copy of Windows 7 that you installed an upgrade, please note the following:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• After the upgrade of the APEX 4.2.0.6, I don't see any change

  Hello

  I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.

  When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?

  SQL > SELECT username

  2 FROM dba_users

  3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')

  4 AND USERNAME NOT IN)

  5. SELECT "FLOWS_FILES".

  6 DOUBLE

  7 UNION

  8. SELECT 'APEX_PUBLIC_USER' FROM DUAL

  9 UNION

  10 SELECT SCHEMA s

  11 FROM dba_registry

  12 WHERE id_comp = 'APEX');

  USERNAME

  ------------------------------

  APEX_030200

  I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839

  Thank you for your help.

  Christian

  Hi Christian,

  chipniz wrote:

  Hello Kiran

  I redid all installation steps and found that I now have this error:

  Service temporarily unavailable

  The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.

  When are you facing this error?

  • Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
  • Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)

  What kind of error is it?

  • HTTP error with an error like 404 code
  • Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)

  What is the type of the OHS?

  • Oracle Application Server 10g
  • Oracle HTTP Server distributed with Oracle Database 11g

  Finally it is part of your question:

  When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  What did you mean by that?

  • You receive the login for the old version screen
  • You receive a blank page

  I would like to you check the following things:

  • Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
  • Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
  • Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI

  I hope this helps!

  Kind regards

  Kiran