Unable to activate Windows 7 Pro after the upgrade of the system

Similar Questions

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• Cannot activate Windows 8 Pro after re-installation.

  I updated my PC by changing the motherboard and installed the Intel core i3 processor and re-installed my legal version of Windows 8 Pro on an HDisk freshly formatted. Now, I can't activate Windows with the product key that is provided in Windows 8 Pro pack. What can I do? PL. help.

  Hi Castillo,.

  You should be able to activate Windows, thanks to the activation of the phone. Here's what you have to do to activate the phone.

  1. Log on to Windows 8.
  2. Press the Windows key + R on the keyboard, type slui 4 and press enter.
  3. On the activation screen that appears, select the country that you reside in, and then click Next.
  4. Available dial and wait for a support officer to speak.
  5. Explain the situation and they should be able to help activate.

  Do not respond if you have more related questions.

• HP ENVY 17 Notebook PC: Can't activate Windows 8 Pro after a factory reset (hard drive reformatted).

  Hello:

  I had to make a drastic clean the C drive of my ENVY 17 laptop and did a Factory Reset. I was able to reload Windows 8 Pro to my USB stick recovery.

  However, Windows 8 Pro cannot be reactivated indicating that the product key is invalid or blocked. I understand that this is due to having the OS completely cleaned and formatted drive.

  My questions are:

  1. Will be the HP (which is available on order) recovery disks be able to help solve the situation described above?
  2. It will allow me to reactivate my Windows 8 Pro?
  3. Will the recovery be HP discs/media contain or are marked with the correct Windows product key?

  Thank you

  Rico.

  Solved! HP technical support took care of me Thank you so much.

• The upgrade from Windows XP to Windows 7 Pro after the hard drive took a dive.

  Hello, I have an old Dell Inspiron E1505, I bought in 2006, which I have upgraded from Windows XP to Windows 7 Pro last an online purchase that came with a product key of designertechsoftware.com in April of 2014. Months later, the hard drive has so I replace w / a 60 GB one and replaced the RAM w / 2-1 GB cards. I don't have a disc of Windows 7 Pro but I got it work using the old XP dics, originally, it came with. Can I use this disc to enter the product key code that I got online for Windows 7? I see there is an upgrade option that comes up when I run the XP disk once it's been installed on my laptop. Thanks in advance for your help in my question. Not sure if it has been already answered the previous question.

  Your best option is to ask a backup copy or to borrow the corresponding edition, you have a license from a friend. Ensure that it is a upgrade disk or any retail version is authentic.

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

• Cannot activate Win XP Pro after hardware upgrades.

  Win XP Pro 32 bit. SP3 76487 ID-OEM-0027903-55213 I got this program for over 4 years with no problems.

  P4 2. 5 g

  in total, 4 g of RAM, 2 GB just installed.

  drive C: 160 g with the OS on it.

  120 g for data D: drive, etc. New install.

  2-drive r/w DVD we're new install.

  After you install a second hard drive, 2 GB of RAM and an another DVD player, I get a message that Windows must be enabled.

  The message does not specify that the OS is not genuine. Only, she states that because of new additions of material that I have to reactivate.

  When I click on the ball to activate, nothing happens, no glass icon:. I waited half an hour the last time. Connection Internet is fine.

  There is NO icon "activate Windows" or selection in Accessories > System Tools folder.

  If you could provide me with the phone number I will call to activate by phone.

  I DON'T want to reinstall Windows and losing all my links program.

  Thank you

  Mark

  Hi Mark,

  Follow the steps in the article.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• Unable to activate Windows XP by using the sticker after replacement of equipment

  Original title: product activation

  The motherboard on my wife's computer fried, so I just replaced.   Centuries ago, it came with Win98 and slowly but surely making its way to XP Home.  I don't have the installation disc, but there is a sticker "authentic" in this topic.  But this product key is coming as invalid.  We have already sunk $500 in there and I don't want to upgrade to Windows 7 on this computer.  From multiple sources, I was told that all I have to do is call the number without Microsoft fresh to get an activation code, but this phone number is not found on your site!

  unless you have purchased the same exact motherboard model and specifications, you cannot activate the exact key even to different hardware, assuming that you have already used this product before and active key, it...

  That is not exactly true.  You may need to activate by phone, but I know people who have changed motherboards and have reactivated their facilities.  Die PCs.  Unless it is an OEM version, I don't think that there is nothing to prevent reactivation.

• Re: Unable to activate Windows Vista Business using the Microsoft key

  I am facing difficulties to activate the microsoft package, whenever I enter the product key printed on the label attached to my pc, it says wrong key.
  Help, please.

  The key to Microsoft, that you can find on the lower side of your laptop is not a kind of universal key and this key belongs to Vista preinstalled on your laptop. You got your laptop with Vista preinstalled. With your laptop, you have paid a license and an operating system.

  After recall of Toshiba you must create Toshiba Recovery DVD or this facilities you can use if often you want with your laptop. This version of Vista belongs to you and can only be used with your laptop.

  If you are using Microsoft facilities DVD you must have the key for this version. If you do not, you must purchase a key online and activate a preinstalled Vista version.

• Can't activate windows xp pro after re install

  I tried again to install windows xp professional on 7 laptops and none of them will be activated. They are in a school and have a volume of education license. I went through activating by phone and it says can not activate. I then spoke to someone at this number who said I had to pay $110 plus tax to fix the problem. I'm at a complete loss as to why they don't will not activate if I have a valid volume license.

  Hello

  I looked towards the top of the Volume License product key, and I don't see anything extraordinary.  The key is blocked Activation but it is normal that the key to Volume license older XP given that these license keys of Volume more circumvented the need to activate.

  Microsoft has created new Volume license key when it was found that Activation Bypass Volume keys (time when the internet became big) are so easy to hack someone leaking just the key to the internet. However, as far as I understand it, the older keys are still valid as long as they were not sunk or abused. I searched the internet for this key and the key does not seem to have been disclosed.

  As for the message 'not installed Validation control' Windows XP came not with the genuine Validation feature "baked in" at the launch.  The Genuine Advantage Notification update adds Validation controls to XP (user does not have to install the update, it's purely optional).  The user can also simply go to http://www.microsoft.com/genuine/validate , the user will be prompted to install the Validation controls and then the online Validation will take place.

  At this point I see nothing suspicious on the Volume of this user license key, and also long as on-line Validation returns as authentic, I believe that the key is valid and authentic.

  Thank you
  Darin

• #for activation ringing unanswered, I am unable to activate windows xp pro.

  I had to reinstall windows because of a new motherboard, but the computer I use is not web connected, so I'll have to activate by phone.

  "Zand" wrote in message News: aea86177-1ac5-4 d 03-905b - 13458485c26c...

  I had to reinstall windows because of a new motherboard, but the computer I use is not web connected, so I'll have to activate by phone.

  Which country are you?
  Look here for alternative phone numbers (they are for Volume Activation, but will help you)
   
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Unable to activate Windows Vista due to the 'security error.

  I have another computer that is currently "hard down" with hardware problems. I tried to use the startup disk original this machine to download Vista on a laptop instead.  I thought that either he would be acceptable since it would be only currently used on a PC, or later - as is typical with Microsoft software on shelf - it could be loaded on a desktop and two laptops.  How can I activate Vista on this laptop without the 'security error", at least temporarily.

  I have another computer that is currently "hard down" with hardware problems. I tried to use the startup disk original this machine to download Vista on a laptop instead.  I thought that either he would be acceptable since it would be only currently used on a PC, or later - as is typical with Microsoft software on shelf - it could be loaded on a desktop and two laptops.  How can I activate Vista on this laptop without the 'security error", at least temporarily.

  Hey Mark_L_Storm

  If vista is preinstalled on the computer "hard down", that it is linked to the original machine it is installed

  It cannot be transferred to another machine

  If a retail vista license, it can be transferred to another machine

  but the rule is a vista = vista anytime facility license

  "or later — as is typical with Microsoft software on shelf - it could be loaded on a desktop and two laptops."

  This isn't the case at all

  a vista license = a vista installation

  Walter, the time zone traveller

• Unable to activate Windows XP Home Edition after the repair facility.

  Of that, I was running a Dell Dimension 5000 bought from the Dell website in 2005. After this computer from run very slowly, I decided on an upgrade. So I removed the hard drive of this computer with XP Home Installation and everything what it intact and plugged the hard drive into a completely new computer (that I bought and customized piece by piece). I also installed Windows XP Pro using the ability of XP to run dualboot. Now the Pro works well, but has of course none of the programs of the host OS installed as even if Pro and Home are installed on the same drive C, Pro of course did not the registry of home settings. That's fine, but when I chose the House to the splash screen immediately after my computer upward once again, I have encountered an error saying that Windows has shut down the computer to prevent damage etc. by a blue screen of death. So I fixed installed House, by inserting the Home CD in the CD drive (which is also new and I bought, not even the one from my old computer to 2005), choice of APPETIZER and not the repair console and then clicking R to repair the detected existing OS. I fixed installed and I was thrilled when the problem has been resolved. When I chose the House and after having set up, I was greeted by the familiar screen with users that I had set up on my PC of 2005. When I clicked the user admin, typed the password, he accepted the password and then a box came up saying I had to activate Windows before I could open a session. By clicking on the number resulted in the user disconnects automatically before the start menu or desktop appeared. Clicking Yes led me to a screen that gives me the choice to choose between online and phone activation. As my entire computer (except for the hard drive) is new, the internet network adapter is also new, and that's why the internet settings (the 2005 model old) which I had not yet changed on the Pro Installation do not allow me to activate via the net. I tried via telephone following all the instructions and punch in the 25 digit code generated by the wizard in the phone and told me that the operator could not generate a code (for me 2 type in the boxes provided and therefore use to activate XP Home). I then shut down the PC, went to the installation of Pro, changed the IP settings according to the instructions given to me by the ISP to the phone and checked the net now works on installation of Pro IE. It worked, and I now turned off, chose the House and tried to activate on the net and there is not yet well make sure that my computer is connected to the net. I even clicked on the phone option and changed my ID by typing my OEM 25 product key numbers and clicking Refresh. I tried again by phone and still could not activate my installation in a House. The installation CD home I used was the 2 me by my Builder (a purple disk saying OPERATING SYSTEM: ALREADY INSTALLED on YOUR COMPUTER). This CD certainly isn't a forgery because I ordered directly from DELL and not even the 2005 Bill to prove it. Is it because I changed my system components and not my hard drive with it, which is the origin of this problem? How can I fix this without backup everything and remove the installation of the House and then re - install?

  "ArjunC" wrote in message News: 3df4138b-2174-4cb1-821e-0527dc60da2c...

  In fact the Windows XP Pro has been installed by the people who moved the hard drive to the new computer. I never asked for it. But remove XP Pro still wouldn't solve my problem. I need to find a way to use my original of 25 characters product key or get a key of success generated by phone so that I can log on to Windows XP Home Edition and continue to use my PC as how I used my old. Some people have told me that I can convince to install MS by phone that I transferred the disk hard - 2 a new computer and then tried a repair but the problem is that all the numbers given on Activation Wizard phone are automated, giving instructions, asking the ID generated by the wizard and then telling me that they are unable to generate an ID for activation. If there is human here, how do you convince a machine of my innocence :)

  You need to reinstall using an XP Home OEM disk - see if one of your friends has one you can borrow. The key on your COA sticker will be valid for this.
  You can also contact Dell and ask them to provide a set of disks in your machine - for a price.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• After the installation of Windows XP Edition family, it won't connect to the internet via Ethernet or wireless. I am also unable to activate Windows.

  just installed windows xp home edition on my laptop but it does not connect to the internet (both with a cable and wireless) and it also won't let me activate windows (cant conect to the Server Setup)

  original title: windows xp is a pain

  What is the manufacturer and model of your laptop?

  Visit their web page (the manufacturer) and find their drivers and help section and get the drivers for your model laptop for Windows XP 32-bit.

  You, of course, this done from another machine and using some external media to get it back to the laptop.  You can get * just * wired or wireless network drivers if you wish - you can then use the Internet on the laptop again to get the rest.

• Unable to connect to the internet after the system restore and Windows Installer (Vista)

  Hello

  I have recently restored the whole system on the HP to my sister a virus that I was unable to remove it manually.
  The system restore went well until it has reached the point where he was going to reinstall Windows. The computer just turned itself off and the software installation was not complete. I am able to reinstall again. I must therefore hold the CTRL + alt + delete, go to Task Manager, click on audit.exe and complete the process to turn on the computer. But I can't do anything with it in safe mode. The main problem is: I can't connect to the internet! Even if the network discovery is on it will not find my wireless network. What can I do on the internet? And is it possible to install Windows again without the CD?
  Thanks in advance!

  Hello

  ·        You are able to boot to the desktop in normal mode? If this isn't the case, then you get any code or message?

  ·        How did you did system restore?

  ·        Are you referring to the system recovery using the recovery partition or the drive?

  I suggest that you start in safe mode with network and check if you can access the internet?

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select SafeMode with networking among the startup options.

  Respond with the required information so that we can help you further.

• Unable to activate Windows 7 - access denied

  My computer crashed a few months ago (I've been putting off dealing with this power) and I had to do a complete and smooth reconstruction. Since the reconstruction, I was able to activate Windows 7 Pro correctly. I had another product key and tried to enter through the user interface both through slui 4, without success.

  As he had alreaqdy been activated once or twice, I need to use the phone activation. However, whenever I click Next after selecting my country (I even tried other countries to be sure), I get "an error occurred" Code - 0x80070005 - Description: access is denied.

  Tired to find a solution through various forums without success. Hoping someone smarter than I am can make sense to sub the diagnostic report. Even tried all the stupid things like making sure that the files were not read-only value and everything works as an admin (certainly an Admin account, and there is no other account anyway).

  Thanks in advance for the help!

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - GPR38 - 7FVXC-2XTHP
  Windows Product Key hash: DxWymEZjcwY/UpAu7xC2XvKNaoA =
  Windows product ID: 00371-OEM-9310233-55396
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {1694FC80-65D5-431A-942D-1A462ED08E52} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150715 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {1694FC80-65D5-431A-942D-1A462ED08E52}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-2XTHP00371-OEM-9310233-553968S-1-5-21-210274762-4070967233-327058173Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F5 20140109000000.000000 + 000A5120200018400F60c 090409AUS Eastern Standard Time(GMT+10:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  C:\Windows\system32\slmgr.vbs(1333, 5) Microsoft VBScript runtime error: permission denied

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C532
  Beyond: 0 x 0000000000000000
  Event timestamp: 11:11:2015 13:59
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: KgAAAAAAAAABAAEAAQACAAAAAQABAAEAln1iRfog4tz4vIqb9AEAbfAB

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  IVRS AMD BANTRY
  SSDT AMD BANTRY
  SSDT AMD BANTRY
  ARCT AMD BANTRY
  SSDT AMD BANTRY
  SSDT AMD BANTRY

  Windows product key: *-* - GPR38 - 7FVXC-2XTHP

  If you used this key to activate your older generation that had a different motherboard, so that is why you can not activate as OEM key is related to the 1st motherboard it is installed on and cannot be used to activate a replacement motherboard.

  If this isn't the case, then try the following:

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com