IMAP folder is not correctly refresh messages

Similar Questions

• LR3.2 film does not correctly refresh for new imported photos

  Installed 3.2 last week and today I did my first import.

  I downloaded the camera into a subfolder of that my folder of photos as usual, then run synchronize on the photo for images folder appear in LR.

  After that everything seems as before, but...

  However, when I scroll through the thumbnails new film coming into view has no images, they are just grey.

  If I stop scrolling they vill update and display the images.

  It is, however, totally annoying because I can forget about the scroll of the images I want to take a look at because I don't know where they are.

  I have to guess and wait for the update.

  If I go back to the images that I looked before then the thumbnails are still there so once they have been updated they stay this way.

  cwallentin wrote:

  Would it be possible that when images were captured captive capture using and the thumbnail was created etc on the laptop.

  He also put metadata in the raw file that makes LR3 belive that a sticker has already been created for the file or something like that.

  Could be that the reason of my problem of bee?

  Your messages earlier did not capture captive nor a workflow that involves copying an image from one computer to the other. If he had done while we might have provided the answer early on.

  Captive capture has its own Panel of settings and one of the options for the size of the preview. The default value is Minimal and as explained previously, this means that the thumbs will be returned only when they pass in the display (the content area or the visible part of the film). If you use a minimum you will need to run the rendering library preview > Preview menu

• Images in html do not correctly attached messages

  I was faced with html and Thunderbird emails recently, but I got a problem...
  the images included in my email are not attached and it gives me just errors, saying that the image cannot be attached, if I want to send email without it. I have images hosted online of course.
  That's what the code looks like:
  "img src ="http://www.mediafire.com/convkey/0966/3742rgmrt7tm7drfg.jpg"

  Here are a few screens (not in English, but little matter):
  1. it seems all good when I import the html code:
  http://I58.Tinypic.com/2955um0.jpg

  2. when I try to send it, the error will appear for each picture in the mail.
  http://I59.Tinypic.com/w1fww8.jpg

  Thanks for help

  SRC ="http://en.wikipedia.org/wiki/Sapphire#mediaviewer/File:Geschliffener_blauer_Saphir.jpg"moz - not-send = 'true'
  translates a web link.

  Notice the moz - not-send = 'true '.

• typedef cluster is not correctly updated

  Hi all

  I'm new to the use of typedef controls so I hope that I just forgot something simple.  I use a consistent control of cluster in Labview 8.6 typedef in listed controls and some digital controls.  I noticed that when I change the cluster typedef, it will not correctly refresh on VI in which it is used.  A specific example, which has been driving me crazy:

  I decided that I need to change a control listed within the cluster so that its name is more descriptive and it has more options.  Open the typedef command, change the name and add two elements to change the items... Save and close.

  Now, when I opened the main VI that I use, I see that the name of the enumerated control has updated, but the new list items are missing.  Because the automatic update is enabled, I can't click apply changes, because they were technically already updated.  To work around this problem, I have to remove the control from typedef and add new.

  Because the name is updated, I know that it is properly connected.  I did something wrong when ordering typedef?  I have attached the control itself, although I doubt this will help.

  Thank you.

  It'snot updated because you have not listed in your cluster types - they are all the controls of the ring which, by their design, do not automatically update when the typedef is changed.

  Mike...

• How can I keep my messages or folder on my local hard drive and not be an IMAP folder as local folder is

  I was a little confused on the way Thunderbird handles the local folder. My local folder is not strictly local, but IMAP as my account records. I would like to be able to unload some of my old files on my hard drive and have them always accessible via Thunderbird. The question becomes greater now that I use a lot of server space, and since this is a business account that I would rather not remove them. I want to archive them. I tried archive but it is just another IMAP folder and so is my local files. Initially, I found having the local convenient IMAP folders because I could file emails from multiple email addresses into common folders and easily get to them via my PC or my laptop because they are IMAP.
  All I want to do now is to archive some of my old emails, so they are no longer on the server. How can I do to make it. I thought it should be an easy thing but now after having spent a few hours looking for a solution and finding I'm frustrated. Everything I've read suggests that the local folder should be stored on my hard don't drive not the server, but this isn't my experience.
  Any help would be greatly appreciated. (I use Thunderbird 24.3)

  In fact, even if I go on once again, I'm more invested in what happens with IMAP and used space.
  It is obvious, from some recent exchanges here records them are "local."

  In the account settings > server settings.
  Check cleaning (": Remove") is turned on and then exit and restart Thunderbird.

  Then check your use of space on the server, after that Thunderbird and the server took a while to 'chat '.

  My guess as to what is happening, is that the IMAP account is not erasing, so deleted mail is there, stay hidden because it is removed but continues to occupy the space.

• The message filter to copy folder imap and then msg msg in a local folder always move works again: local folder, but sometimes the msg is absent from the imap folder.

  I use a message filter to perform two actions on messages:
  (1) message copy of an imap folder
  (2) move the message to a local folder.

  Usually this works; the message is in the imap folder and local folder and is not in the Inbox. But about 10% of the time the message is present in my local folder but not the corresponding imap folder. I compare the contents of the local file and the imap folder and local folder will be messages that the imap folder is missing. I can then copy the messages in the imap folder but I want to avoid the check manually.

  Any ideas what might be happening? (I just activated the filter log see if anything interesting shows here).

  I swapped the operations to be 1) copy to the local folder, 2) move the imap folder. I put the front filter classification. This works reliably so I will mark the problem solved.

  Matt, thanks for your help!

• Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. Error number: 0x800CCCD2

  original title: error number: 0x800CCCD2

  Can anyone help with this issue:

  Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'AOL', server: 'imap.aol.com', Protocol: IMAP, server response: "SELECT failed", Port: 143, secure (SSL): no, error number: 0x800CCCD2

  Thank you!

  Hi again Steve - I have spent a lot of time on the phone this morning to Dell technical support. the accompaniment of the victim and I did a lot of fiddling around with various options of Windows Mail and I don't know exactly what we were doing, but the issue seems to have resolved itself! Thank you for your time and trouble.

  Best, Douglas

• When I click "not spam" on a message in the "junk" folder, the content of the message is changed

  the message seems to be moved, but the content is changed

  Re: when I click "not spam" on a message in the folder "undesirable."
  by "did not" I assume you mean 'delete '.
  by the "junk" folder, I assume you mean that the folder "Deleted" or "trash".

  I guess you mean:
  When I click "not spam" on a message; in the "junk" folder, the content of the message is changed.
  Until the message "Deleted" shows in the "Deleted" folder, but seems to have changed the content.

  Try to make the folder "Deleted".
  Right-click on the "Deleted/trash" folder and select "Properties".
  Click the 'repair file '.
  Click on 'OK '.

  How many times you empty the trash?

• I get and error message when you try to play FSX:FSFDT CONTROL PANEL component 'VAYSIMVL.ocx' or one of its dependencies is not correctly registered: a file missing or invalid.

  Mr President

  I joined the community vatsim (the international flight online network) for fsx. It's more realistic than fsx never giving live atc communication with atc controllers. That is why I joined it. After I signed up they asked two software download

  1: fscopilot

  2: fsinn

  both are necessary to connect to vatsim with fsx.

  I downloaded it successfully, and the entire facility was very good and correct.

  Then I started to fsx and he gave me a messsage to fscopilot and fsinn work with fsx and I clicked the Yes option.

  suddenly, I got an error message

  FSFDT CONTROL PANEL

  Component 'VAYSIMVL.ocx' or one of its dependencies is not correctly registered: a file is missing or invalid.

  so I can't open the addon for fsx linking vatsim with fsx.

  Please help me to solve this error, that I really need vatsim to work with fsx.

  kindly give me the right solution.

  original title: crash error and addon fsx

  See: http://forums.vatsim.net/viewtopic.php?f=43&t=58440

• A message to the point that says that the server is not correct on hotmail.

  Original title: info server accounts Hotmail

  A message to the point that says that the server is not correct on hotmail. Where can I get this right?

  Dorothy pc appears now as the server. I don't remember giving this info. Also, I have 3 hotmail accounts appear, all of same email address. How can I get them all together?

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://windowslivehelp.com/product.aspx?ProductID=10

  http://windowslivehelp.com

  Hope this helps,

• Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. 0x800420C8 error number.

  Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. Account email Sympatico Server SMTPHM.sympatico.ca Protocol SMTP Port 25 secure (SSL) Yes, error number0x800420C8

  original title: 0x800420C8 error NUMBER

  Never seen a port 25, who wanted to use SSL, but by checking, Sympatico's apparently.

  1. This account has already worked? Is it simply to start?
  2. What is the exact verbatim error message? Otherwise, copy & paste it into a response.
  3. Have you tried to send a message and the message stuck in the Outbox?

• Outlook Express 6 - recently emptied my folder deleted items, but now I can not remove any messages in my Inbox

  For my sins, I always use Outlook Express 6 for my e-mail personal. Recently, I've erased my deleted items folder, but now I can not remove any messages in my Inbox. Any ideas?

  Thank you

  Outlook Express has never reduced the file size of the file folder deleted during the clearance of the output folder. Instead he left a lot of dead space that has not been used for something beyond too much space.

  The good news is that if you simply, locate the Outlook Express mail storage folder and delete the Deleted.dbx file, Outlook Express will recreate a new vacuum the next time it starts up.

  1. Open Outlook Express and access Tools, Options of dialogue,Maintenance tab, click store folder and copy the location. Close Outlook Express.
  2. Click on Start, run or the Windows key + R to rap then paste in the location previously copied and press on . The storage folder should open.
  3. Remove or rename the Deleted.dbx file.
  4. Close the file, and then restart Outlook Express.

  That should solve your problems of deletion. You can also run a Compact on your other files .dbx tabmaintenance Tools, Options dialog box.

• CM1415fnw-when scanning in color-message "the selected folder is not writable" - scan OK in black and white

  1 HP LaserJet CM1415fnw

  2 mac OSX 10.7.4

  3. message: "the selected folder is not writable" when try to scan in color, scans OK in black and white

  Make sure the registration color scans at is not read-only.  You can do this by right-clicking on the folder and then select Properties.  Ther will be a box with the unalterable words beside him.  Make sure that the check box is disabled.  If the box has a check or anything in this document, click it until there is nothing in the box.  Let me know what happens.

• When I try to delete the message in the "Deleted items" folder I get an error message "some items in the folder"Deleted items"could not be deleted." year error has occurred. Any Suggestions?

  I get to see all the messages that I deleted in my "Deleted items" folder and when I try to delete the message in this folder I get an error message 'some items in the folder "Deleted items" can not be deleted.' an error has occurred.  Also when I try to delete my Inbox it won't move message from 'deleted items '.  Any suggestions?

  This is probably due to a mismatch between what is in the message store and which think that the database is in the message store.  Try to compact and repair the database and see if that fixes the problem.  See www.oehelp.com/WMUtil/

  Steve

• Streets of MS & travel will not work after the installation. Message says reg. Error & re - install. Re-install does not correct.

  What happened the installed program 5 or 6 months ago after a vista update. even after uninstall the program and reg cleaning then reinstall error persists. Very strange for a coflict how MS product.

  Hello

  1. What is the exact full error message?
  2. Remember to make changes to the computer before the question?
  3. What version of Microsoft streets & trips do you use?

  I suggest you try the procedure described in the link below:

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590

  You can also check:

  MapPoint / streets & trips / Highway Solution Center

  http://support.Microsoft.com/ph/1058#TAB0