Re: Vista doesn't show log on screen - Satellite P200-1K9G

Similar Questions

• A gray screen with Windows Vista once loading reached log on screen-no visible mouse

  I have Windows Vista Home Premium 64 bit and a NVidia GeForce 7300 GT video card.  Since yesterday, when I try to start the PC, the display is OK until just before the log on screen (when the Green loading bar disappears and the user account selection page will appear).

  Once he reached this point display is just grayed out (non-uniform color, some variations in tone on the page).  No icons or the mouse pointer is visible.

  In safe mode I tried to restore the system to a date where he worked well, but it did not help.  I disabled the display adapter and can then load Windows ok, but the display is naturally very ugly.  I downloaded the drivers for the video card, then activated the display adapter, but this takes back me to the original problem.

  Any ideas how I can fix this?

  Thanks for the reply.  It was all down to the graphics card.  After connecting through Mode safe, I turned off the "display adapter" or a graphics card.

  I then loaded windows normally and everything was ok, but the display is obviously affected.  I will revive the graphics card but after the reboot, the same problem appeared.

  I then loaded Windows again through safe, disabled the display 'adapter' once again, reloaded windows in normal and DELETED mode the display adapter.  Then, I downloaded the latest driver for the graphics card.  I received an error message saying that the material was not present.  However, the restart, the graphics card was detected, installed and now everything is OK A.

  Phew, a moment I thought I had a virus.  Ive been advised that there is probably a conflict between the graphics card and software?

• Increases brightness screen Satellite P200-1EE

  Hello, I received by Satellite P200-1EE with Windows Vista Home Premium.

  Some time ago I found that the screen itself become very bright. Usually after one or two hours, sometimes faster after coming back from the screen saver. Yet it's brighter, then I can set up using windows options or functional keys, I see not too much on the screen then. What can cause this problem?

  I hope that there is no hardware problem. Help, please.

  Hello

  This means that the brightness of the display will change automatically?

  Well, it's really hard to say why this is happening. Normally, you set a certain point for the brightness of the screen in each power profile, for example, symmetrical or optimized battery.
  Check it!

  Also, make sure that all Windows updates are installed.
  In addition, I would recommend updating BIOS. You can find it on the Toshiba site.

  Good bye

• Vista doesn't show that drive external hard connected by USB (USB 2.0 TO IDE)

  I formatted and partitioned Maxtor 30 GB HD and you want to use as external backup storage device. I put the jumper to "Master" and the format type is NTFS. The HD works perfectly with my old PC (Win XP) as an external drive via USB. But when I set with my new PC (Vista Home Premium), the HD appears only in "Device Manager" and not the case in ' mycomputer ' or 'disk management '. I've tried different USB ports on my new PC, but I could not be able to get it recognized by Vista yet. I searched on the internet and most said about changing the drive letters and fitness solutions in form, but my problem is that disk external drive does not appear in the "Disk management" section at all in any form. Any help in this regard will be highly appreciated.

  Hello
  
  1. What is the status of this drive in Device Manager? Is there an exclamation next to him?
  
  Check the status of this device by using the command of part of the disk. Refer to the he links below for more information and measures.
  A Description of the Diskpart command-line utility
  http://support.Microsoft.com/kb/300415
   
  DiskPart command-line options
  http://TechNet.Microsoft.com/en-us/library/cc766465 (WS.10) .aspx
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to know if Vista SP1 has been installed on the Satellite P200

  Can someone tell me how do I know if I have Vista service pack 1 on my laptop P200?
  Some updates on day of Tempo of Toshiba requires it, but I don't know if I have it!

  'Computer', 'properties' simply said Vista Home premium.

  Thank you.

  If you do not find in *-> System Control Panel *, then SP1 has not been installed on the laptop

• Satellite P200 screen is eventually died - now very dark

  Hello

  My laptop screen (Satellite P200) is eventually died.
  He had been much flicker when opening the laptop but settle.

  The screen is very dark and you can see just the windows etc. I can't connect a second monitor and run from that.

  -Is the screen, backlight went?
  -I'm out of warranty, how long does it take for an extended warranty through? The site has offered me one for relief.

  Any information would be great.
  Thank you
  Simon.

  Hello

  First you will not get an extended warranty, if you haven't bought it.
  If you warranty is no longer valid, then you will have to pay for the repair.

  Now a few words about your question;
  I think that your FL inverter is dead. The problem described in job ads seems to be a fault of inverter FL. This small part controls the backlight of the screen and causes this problem.

  I recommend contacting the technician of laptop (certified partner) and I will ask the Fl inverter assessment and if necessary I would work out a replacement.

  Good bye

• When I closed my Windows Vista computer, it reached the "Logging Off" screen and seems stuck.

  Sporadically, when I turned off my computer, it reached the "Logging Off" screen and seems stuck.  I walked away from my computer for a returned more than an hour to find the screen always showing "Logging Off" with the small circle in the middle of spinning.  The only way I can close down is to do it manually and then when I use the computer at a later date, I ger the message that my computer has been shut down improperly and I should log in safe mode.  This happened only since I upgraded to Windows Vista.  My computer is a Toshiba laptop Satellite P105-S6147.

  original title: Shutting Down computer

  Hello

  Please, try the suggestions made by the former MVP Malkeleah in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-stuck-at-logging-off-screen-after-trying/d99659e2-03d4-4b18-b3f1-cba3a438f07e

• to use vista log on screen on xp

  I downloaded vista log on screen. How can I use it on xp.

  You can not, Vista and XP are 2 completely different operating systems. You may be able to use the Vista wallpaper, but not the actual user invites and background login screen.

  J W Stuart: http://www.pagestart.com

• menu contextual Family Vista premium doesn't show 'open with '.

  I had to replace my hard drive and now the context menu in vista family premium doesn't show 'open with' how can I add it then I choose a program?

  I had to replace my hard drive and now the context menu in vista family premium doesn't show 'open with' how can I add it then I choose a program?

  This tutorial allows you to add open with in your context menu:

  http://www.SevenForums.com/tutorials/52833-open-context-menu-item-Add-Remove.html

  The tutorial applies to both Windows 7 and Vista.

• Hello .i have two montors connected to my pc but it doesn't show that I have a

  Hello .i have two montors connected to my pc but it doesn't show that I have a

  Hello

  1. What is the brand and model of the computer?

  2. a computer can detect both monitors more early?

  I suggest you to refer to this article and check if that helps.

  Setup dual monitor: two screens are better than one: http://www.microsoft.com/athome/organization/twomonitors.aspx#fbid=pol8zDAfueP

  Solving the multiple monitor problems
  http://Windows.Microsoft.com/en-pH/Windows-Vista/troubleshoot-multiple-monitor-problems

  Refer.

  Set up multiple monitors: http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps.

• How to block all the videos and ads on all the site as how it is when it shows the gray screen when the flash player needs to be updated

  Hi there please help me. I didn't have this problem until two days ago when the browser updated itself. I have the youtube video downloader add on and always use it. I'm on a data plan and it used to block videos and add ads which I like, but now is not because of the update, I came back to the old version, but it did not help and I downloaded the flash but block it does not work. It makes the slow loading of pages and uses a large amount of data that I tried many things like all the plugins of switching to add it on the menu to activate ever and it doesn't quite work. Before it used to show the gray screen, where it says "the flash player is out of date" on videos and commercials, but he does not do this because of the update so please help me to do it again.

  I solved. On the firefox support page they will give you information about the HTML5 player and they say there that firefox uses it only 38 version before so I'm 36 version and it worked in blocking it as before.

  So its all sort and if everyone wants to do the same thing go to https://ftp.mozilla.org/pub/firefox/releases/ and all previous versions will be there.

• Update of Microsoft showing the white screen

  I have a problem with windows update, it shows a white screen with #ElementModuleHeaderText #.
  #ActionCustomInstallImportant #.
  #ActionCustomIntstallOptional #.

  and that's it nothing else, the page is empty, don't cancel anything. You have any ideas what it could be and how to fix it?  Thanks for the help.

  I have not downloaded anything in recent weeks, and I can say no updates have been installed for a few weeks.

  Hi Whizzie,

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  Step 1: reset Windows Update components .

  To reset the Windows Update components, you can follow the link provided below.

  http://support.Microsoft.com/default.aspx/KB/971058

  If the solution provided above does not resolve the problem, you can follow step 2 to perform a clean boot.

  Step 2: clean clean boot .

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on Continue.On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• After each log on screen solution of problems and neet to reset each time.

  At each opening of session... the screen resolution changes from true 32-bit color at 265Colors... even when applied or OK.  The color of the screen is very distorted.
  And I don't know why the application will not be "stay applied...?
  Screen resolution, click on advanced settings, monitor, then change in true color 32 Bit... at every log on screen is warped back to 265 colors.  I even tried to go to the administrator and he won't always be applied.
  Help is greatly appreciated... The wallpaper is from Microsoft.

  Original title: at the start, I have to the resolution of the screen "Reset" to "True Color Bit 32"... It comes back @ log off or shut up to 265 colors... My change applied does not hold > WHY?

  Hello

  Thanks for posting your query in the Microsoft Community Forums!

  After the description of the problem, I understand that you face the issue with the resolution of the screen. I will certainly help you in this regard.

  Help me with little information.

  1. what version of windows you are using on the computer?
  2. What is the number of brand and model of the computer?
  3. don't you make changes on the computer before this problem?

  Try these methods and see if it helps.

  Method 1
  You can perform a clean boot and check if software is causing the problem, and then try to change the screen resolution.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 2
  You can also uninstall and reinstall the latest display drivers on the manufacturer's Web site and check.
  Refer to the help article and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  For reference:

  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  Response with more information to help you.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photo Gallery of window 'import' options shows a white screen

  De : Rogier

  Message: I am running Windows Vista Home Premium and have a problem with the photo gallery. I can no longer change the import options. File-> Options-> Import, shows a white screen. This happens only to one of my user accounts, either one works great! I guess that's a result of PCTools Desktop Maestro of the recent registry cleaning. Someone knows how to solve this problem.

  From: oscar

  If you used a registry cleaner, and if you have problems with some files of the operating system, then the fastest solution to this problem would be to open a new standard user account, transfer your files and records of personnel to this new account data, and then close the standard user account that has the corrupted OS files.

  Oscar :)

  ... Make a right click is your very good friend...

  Another response of the community of Windows Vista discussion groups