IMAQ: 'image at the table', directly related to the 'picture in picture' seems to have a pb with U16

Similar Questions

• My ssl.gdata.pl certificate is not approved, as the other browsers do seem to have a problem with it.

  It is a certificate RapidSSL (GeoTrust). Other browsers do not dispute.

  You must send the intermediate certificate RapidSSL CA.

  You can test the certificate through a site like this string:

  • http://www.Networking4all.com/en/support/tools/site+check/

• The HP BIOS update seems to have caused havoc with my laptop HP G62

  After him have updated software for my PC BIOS of G2-244 HP laptop usb mouse doesn't work.  I checked Device Manager and all the USB ports seem to be defective with a "!" triangle icon next to them.  When I ask to check the drivers of these ports, the device manager tells me that the drivers are current and good.  Anyone else had problems with the recent update of the HP BiOS?

  I also tried to reinstall my old BiOS version (online successfully) but no change to the usb port is port problem

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• I can't find my brush, the regular brush tool. I don't see smart brush on the toolbar. It seems to have disappeared. Help! I have a watermark that is saved as a brush, and I can't use it!

  I can't find my brush, the regular brush tool. I don't see smart brush on the toolbar. It seems to have disappeared. Help! I have a watermark that is saved as a brush, and I can't use it!

  You may ask this question in the Forum of Photoshop elements can help because there are differences between how the programs of work.

  Photoshop Elements

  What happens when you press SHIFT - B on the keyboard several times?

  Terri

• When, in my pictures page, I can't see the image of the picture, just a flower of orange tree, how to fix this?

  On the page of the main screen when I click on the photos, I used to be able to see the image, without having to click on preview, how to change it so I can see the picture without having to hit a snippet. I want photos to show on the thumbnails.

  I think that the excerpts come from thumbnails cache. And clear the cache of thumbnails is certainly worth it. See How do I clear the Cache of thumbnails in Windows 7 and Windows Vista by using the disk cleanup utility.

• After effects CC 2014 problem: Image of the picture since the last link of the first CC-After effects burned permanently into new compositions of project.

  A picture of one of the clips that I sent to first After Effects by 'replace with After Effects composition' was definitely burned in After Effects and it appears now in each new composition of each new project, I have create as the background for such a composition.

  For example, I sent first, for a clip of a building to After Effects for the correction of the colours with Finesse and stabilization of the string, and then after that rendered finish and close all applications, now everytime I open After Effects for any other project, they are already created or brand new, each existing or newly created composition (in a command Mac N) you see the image of the building as the background of the composition.  If you create a new publication, although it remains empty of all layers, you see the image of the building.  If you have a composition already created with layers, when you turn off all the eyes of the layers, you expect to see black (Nothing) in the composition window (if it is the color you assigned to be like the back of the comp), but instead, you see the building.  If you change the background color of the model in the Composition settings, you still see the building as background.  If you make such empty composition (not layers) return you the image of the building, not black.  I tried to click around and through the preferences and even uninstall the application and reinstall, but it seems to be permanently burned in in the background of each model.

  Please, any ideas of what is happening and how get rid of?

  Thanks a lot for your help.

  URI

  Start with purge all your caches, included disk cache.

• Place the image into the picture box and culture

  How to place an image in a simple picture box so I can crop and create a link? I don't ' want a slide show.

  Hello

  In the menu file-> Place. Go to your image and click in your page of muse. This places the image in the Muse. By default, all images are placed in the context of the Image. Double click on the image to select the image, you will get the options of transformation, expand and collapse according to your requirement to adjust the image in the Image. Check out the video below to see what

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/working-with-images-in-Muse/

  Hope this helps

• What happened to send the link? It seems to have disappeared after upgrade to Firefox 16.

  Right click on the menu option "Send link" seems to have disappeared from Firefox 16 (office). Why? He'll be back. I used this function several times a day (and has so many of my friends). It doesn't seem to be just an add-on to can perform the same function. Help, please!

  Edition-2012-10-27 to add information about a new Addon:

  A new add-on which will add a "Send link" option to the context menu when right clicking on a link on a page:

  • https://addons.Mozilla.org/en-us/Firefox/addon/send-link-in-context-menu/

  Original message marked as solution by the original poster is less than the breaking

  Changes were made to Firefox 16 some of the contextual menu options. The amendments by the Mozilla developers, after research on the use of certain options make a right-click.

  • You can read the Bugzilla reports below as to why the change was made.
  • You can access the old "Send Link" by pressing ALT (Windows) key > click file > click the Email link.
  • There is also a new add-on that you can try - https://addons.mozilla.org/en-us/firefox/addon/email-this/

  Bugzilla:

  • DO NOT post in reports from Bugzilla - read this - https://bugzilla.mozilla.org/page.cgi?id=etiquette.html
  • bug 239307 - Remove "send link...". "contextual menu
  • bug 770419 - rename 'send Image... ', 'Send video... '. ' and 'send Audio... '. ' to 'send Image... '. ", etc.

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• Dynamic action - when the 'event' and 'condition' seems to have no sense

  Step by step, I am trying to get free Javascript coding so I can rely on what natively offers the Apex. It was an interesting experience, however I have noticed certain situations sicesdonneessontdisponibles options seems to have no sense, at least to date, and you will certainly help me which can be cleared up. I tried to put one of them into words. I just created a new dynamic action that will just set the focus to an element whenever my page is loaded.

  Why my new dynamic action allows me to choose the "Page loading" event and condition "sucks"? I don't understand why this combination is available. There is probably no effect anyway, but I decided to leave the condition "without condition."

  Thanks in advance.

  Franklin.Jr wrote:

  Step by step, I am trying to get free Javascript coding so I can rely on what natively offers the Apex. It was an interesting experience, however I have noticed certain situations sicesdonneessontdisponibles options seems to have no sense, at least to date, and you will certainly help me which can be cleared up. I tried to put one of them into words. I just created a new dynamic action that will just set the focus to an element whenever my page is loaded.

  Why my new dynamic action allows me to choose the "Page loading" event and condition "sucks"? I don't understand why this combination is available. There is probably no effect anyway, but I decided to leave the condition "without condition."

  It's just that there is a basic LOV status of one size for all types of events. Most of the conditions it contains is relevant to events associated with the elements. "Page Load" + "sucks" doesn't in fact make sense, but 'P4_END_DATE' + 'is null' fact. The Condition property remains visible and active so that the option "JavaScript expression" are available, as this can be used to make any event conditional.

• We have added images to the Windows Photo Gallery and they will not come with other photos in our screensaver. What should we do?

  We put family photos in Windows Photo Gallery and then transfer them to a disc for recording.  We leave some in the Windows Photo Gallery and then click on the photos in the section of the control panel of the computer screen saver.  Old photos still come on t he screen saver, but the new ones that do not.  In addition, any image that we place it anywhere on the computer in a file or something else happens now in the photo gallery, and they did not have it before.  We need to stop that as well.

  We want to use all the photos in the photo gallery for the screen savers.

  We would like to stop pictures in other parts of the computer to be placed automatically in the photo gallery.  We want only to directly uploaded photos.

  Hello

  Try to make the clean boot and see if it makes any difference.

  To the clean boot you start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  For more information you can check the link below:

  http://support.Microsoft.com/kb/929135

  Let us know if it helps.

• Images on the screen are HUGE. Can you help me with this?

  The images on my screen are HUGE. I can't read a page without sweeping left and right.  If I try to play a game, it is impossible, because the game does not appear.  This has happened without any changes to the computer.  In addition, several times when I go on Facebook, the police is so small I can't read, I have to click on 'zoom' and set it to 125 in order to read it.  An example of how out of whack it is, when I turn on my computer, there is a circle of color just before the authentication page rises and this circle is now an oval.  Please can someone give me detailed instructions on how to solve this problem.  Don't forget I'm a novice on the computer and don't know most of the 'computer language' thank you very much in advance. LATER THAT DAY... Problem solved, thanks to you all.

  Right-click on your desktop, click Customize, then click the bottom display settings and you can change the resolution in the new window that opens

• Can someone please tell me how to drag and drop images of the pictures Mac (using Yosemite OS) program to 5.7 Lightroom?  Thank you.

  I just got a new computer and uses pictures instead of iPhoto for cataloging my images.  I would like to use Lightroom 5.7 for an editing tool, but I'm frustrated that I can't drag and drop the images I want to change?  Any ideas?

  Hi tamia82374570,

  Greetings.

  In my view, it is not possible that you are trying to import images from one application to another.

  • You will need to first export of photo images in a folder on the desktop or any other location
  • Then open LR, click Import and navigate to this location in the source Panel and import the images in LR.

  Concerning

  Rohit