IMAQdx Get Image2.vi questions...

I've been running a program of vission machine for some time.  Recently, I did an executable and Installer to transfer it to another PC and will have questions.

The program crashes on trying to acquire its first image.  It throws the error 1074360293 to "IMAQdx to Image2.vi.  As far as I can see, nowhere in the program is this called function.  The closest I can find is in the image grab VI, but uses 'IMAQdx Get Image.vi' without mounted 2.  So I don't know why it's looking for it.

Does anyone know where else this VI could be called from?  To try to solve this problem, I even installed the same Vision on the new PC programs to bring on the same files.

Thank you

You will not be able to run even the VI if LabVIEW does not find the file.  But if you can run the VI, the file exists on your system somewhere.

The VI is actually inside a .llb, so a file search won't be able to find it.  Here's where:

C:\Program Files (x 86) \National Instruments\LabVIEW 2015\vi.lib\vision\driver\IMAQdx.llb

The only way I can think to mix the original versions and '2' of the screw are if you have changed the VI on several systems, and each system has had different versions of Vision Acquisition installed.  I can't think of another possibility that would entail.

Tags: NI Hardware

Similar Questions

  • How to get to my questions here

    I have the moment the more difficult to find this site on microsoft.com (just saved as Favorites).  Now I can not find how to get to my questions just after the signing.

    After signing, click the name of your profile at the top right of the page. Here is the link: http://answers.microsoft.com/en-us/profile/c816ceae-5d51-e011-8dfc-68b599b31bf5

  • Conductor 3.0 with 10.5 of the Complutense University of MADRID - cannot get the AdHoc questions work/TLS record

    I'm working on a laboratory configuration to prepare application a client driver 3.0 with 10.5SU1 of the Complutense University of MADRID.  I have the base line everything up, but I can't get the Ad Hoc conference bridge to enroll at the University Complutense of MADRID by the conductor, nor I can SIP trunk to become accessible.  This all points to a TLS problem, which is reflected in the newspapers of the Complutense University of MADRID:

    Pre-verifie SdlSSLTCPListener::verify_cb = 0, cert check errno = 20, depth = 0
    00269848.000 | 22:41:54.023 | AppInfo | HandleSSLError - verification of the certificate has no:(Verification error:20)-Impossible to get the certificate of the local radio station for 10.0.0.113:41409

    This repeats for the Ad Hoc and appointments of the intellectual property on the driver.

    I followed the conductor with the guide of the AAU (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) as well as the deployment of certificate (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) guide.  I have a root certification authority I use (lab.local), I installed the root certificate and the certificates of the host on both devices.  OpenSSL gives me the verification of the return code: 0 (ok), at once UCM and conductor during validation to the root certificate.

    I think that I followed the guides and double-checked against them.  Someone else has seen this? What Miss me?

    Hi Ryan,

    I think that I am running into the same question... The TAC engineer gave you a bug ID I can follow?

    Thank you

    Peter

  • Get the challenge questions and responses of OIM 11 g PS2 (11.1.2.2.0) using a code

    Hello

    I have to write code to pick up the challenge question and answer for a user (a user has only a matter of challenge), that's the feature 'Reset password', I have to create a webservice that can retrieve this information for the portal application (it is that we have a custom interface). My webservice was working fine until 11g PS1 I could to the query table "DMP" and get relevant data for the user, but after upgrading to 11g PS2 (11.1.2.2.0) the old code does not work it is back * to challenge and answer question.  So, I updated the code, now instead of directly querying table PCQ I use the API of the IOM, I am able to make the issue of the challenge for a user by using the getChallengesForUser method, but I don't know how to recover the answer to this question...  Please help it is a little urgent.

    PS. : If the soil is to use the getChallengesForLoggedInUser method if you please how can I create a session in the same method for the user.

    Concerning

    Dheeraj

    Code snippet:

    oimConn = new OIMConnect();

    Customer OIMClient = oimConn.connect ();

    usrMgr = client.getService (UserManager.class);

    ChallengeResponseService responseServi = (ChallengeResponseService.class) client.getService;

    ClientSession = client.getService (ClientLoginSessionService.class) ClientLoginSessionService;

    System.out.println ("inside the getSecretQues()...");

    System.out.println ("inside the getSecretQues ()... userId..." + userId);

    clientSession.loginSessionCreated (userId);     I thought that it would create a user login session so that I could use 'getChallengesForLoggedInUser '.

    Set setForQues = responseServi.getChallengesForUser (username, Locale.US);

    Iterator setForQuesItr = setForQues.iterator ();

    If (setForQues.Size () > 0)

    {

    Defy challQuestion = (Challenge) setForQuesItr.next ();

    question = challQuestion.getDisplayValue (); This works very well and retrieves the question

    }

    The code below is to get the answer works but doesn't

    SER value = responseServi.getChallengesForLoggedInUser (Locale.US);

    Object [] challengeQuesAns = ser.toArray ();

    for (co int = 0; co < challengeQuesAns.length; ++ co)

    {

    Defy challengeAns is challengeQuesAns (Challenge) [co];.

    System.out.println ("Inside getSecretQues ()... challengeQuesAns..." + challengeAns.getId () + "" + challengeAns.getResponse () + "" + challengeAns.getResponse ());

    If ((challengeAns.getDisplayValue (). Equals (question)))

    {

    response = challengeAns.getResponse ();

    }

    }

    clientSession.loginSessionDestroyed (userId);

    Can you try below extracted and see if you are able to print the answer decrypted?

    try {}

    tcUserOperationsIntf userOperationsIntf = (tcUserOperationsIntf) oimClient

    .getService (tcUserOperationsIntf.class);

    resultSet tcResultSet = userOperationsIntf

    .getChallengeValuesForUser (Long.parseLong (take));

    If ((resultSet == null) |) ((resultSet.isEmpty ())) {

    System.out.println ("the ResultSet is empty or null");

    Return challengeQuestionAnswers;

    }

    rowCount int = resultSet.getRowCount ();

    for (int j = 0; j)< rowcount;="" j++)="">

    resultSet.goToRow (j);

    String columnNames = resultSet.getColumnNames ();

    for (int i = 0; i)< columnnames.length;="" i++)="">

    String question = resultSet

    .getStringValue ("Users.Password challenge Question.Question");

    String response = resultSet

    .getStringValue ("Users.Password challenge Question.Answer");

    challengeQuestionAnswers.put (question, answer);

    }

    }

    } catch (Exception e) {}

    e.printStackTrace ();

    }

  • How do I get my security question resett show resett link

    I must add coupon itunes $ 10 already, but I can't buy an app in the store when I buy will have the question

    security, but now I'm forget it so I want to restore the security issue and when resett he bones do not show e-mail received resett link pls * me thanks!

    You can try to follow this link: If you have forgotten the answers to your security questions Apple - Apple Support ID.

    If still does not, click on this link: Contact Apple for support and service - Apple Support

    call apple, so they can help you

  • How can I get my security questions spent when there lt locked me and I do not

    my ipod I locked and I don't know my security questions to buy stuff

    You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

    (138745)

  • Error 1074360317 - IMAQdx get image.vi

    I have an en program Labview and vision 8.2 which works very well.  Version of Notre Dame we changed of Labview and lately vision pour version 8.6. When I build and stretches target my application on the computer with the new version the program returns an error of such image mentioned in the subject acquisition.  I must say that I've updated the runtime on the computer and I've activated licenses pour 8.6 versions.  I can't change my program and I have to make corrections

    Thanks for your help!

    I found the problem.  This is the function IMAQdx open camera version 8.6 of the vision module which has more CAM0 as default camera.  Having not connected input so it now gives an error.   Documentation in reads "Session in specifies the name of the camera you want to open." The default value is cam0. "but this is no LONGER true because he's off default camera.  Problem OR?

  • Horizon 7 Clones snapshots get trust relationship question after the recovery process

    Hello world

    I was wondering if anyone else getting an error when they recover their Instant clones related to trust now AD clones machines.

    Full message:

    The SAM database on the Windows Server doesn't have a computer account for this workstation trust relationship.

    Objects are found in AD and seem to be good. And the initial deployment of the office pool works very well. It's just when I go to recover all the jobs to fail.

    Additional information:

    1 AppVolume AppStack mounted (ver 2.11)

    1 writable AppVolume mounted no model profile

    Hey vplstingels, we are seeing this same problem. Running on 7.0.2. I decided to delete rather than recovering back them is the cause of these from SAM of the database.

  • Get the below question "internal error - failed to initialize the driver of the NLS in a load"


    Hi all

    in my project I use the odbc driver with the version as "11.02.00.01" with the 32-bit version, I use the oracle 11g. If I try to connect to my odbc driver, I get the point above.

    for the above, I tried the following, by setting the NLS_LANG in the variable environment, but it does not solve the problem.

    can someone let me know what Miss me?

    Thank you

    1388a329-e0f1-473D-8b00-83cab52824ea wrote:

    Hello

    Thanks for your reply.

    can you please let me know what is the root cause?

    Thank you.

    Why do you need ODBC to connect to Oracle?

    Do you realize that I'm not standing behind you.

    I don't know what you post.

    Actually, you said similar to below.

    my car does not.

    Tell me how to move my car.

    You have not yet posted version or name of the operating system.

    ODBC is misconfigured.

    No one knows if you have error of commission (doing something wrong) or error of omission (not doing something that needs to be done).

    What kind of error do you have?

  • How can I change the normal state. All I get is a question mark.

    I can't change the normal state for my site. Button text color for the normal state is a question mark. Is there a way to reset this?

    Try to change the style of link Site Properties > happy and then check if it works.

    Thank you

    Sanjit

  • Get the 10 questions back to the top using a query

    Version 11g, Apex 4.1

    Hello

    I have a table with the following structure
     
 error_code       date       error_type
 e1                 10-jun-2012     P
 e1                 10-jun-2012     P
 e2                 10-jun-2012     C
 e3                 09-jun-2012     P
 e4                 09-jun-2012      D
.
.
e20               01-jan-2011       c
    I have to get the top 10 mistakes as well as charges.

    I know how to get the counts, I don't know how he limited to the top 10 of the entire list


    Thank you
    Sun

    Published by: sun1977 on June 12, 2012 06:13

    Try something like that.

    select error_code, cnt
  from (
select error_code, cnt, rank() over(order by cnt) rk
  from (
select error_code, count(*) cnt
  from 
       )
       )
 where rk <= 10
    Untested code
  •  
		     
    Get-VirtualSwitch - NumPortsAvailable Question
     
			 
    When I run the cmdlet get-virtualswitch, exit for NumPortsAvailable is completely false.  Am I missing something?
    Example:
    One of my hosts this returns for vSwitch1
    Name: vSwitch1
    NumPorts: 64
    NumPortsAvailable: 61
    I know the NumPorts is 64 instead of 56 due to the 8 reserved, but the NumPortsAvailable shows that I'm only using 3 ports on this vSwitch.  In fact, there are 46 ports used on this vSwitch.
    Anyone has an idea why the value of NumPortsAvailable is then turned off?
    			 
    Can you give the script following a go and check to see if it changes anything?
    

    $esxName = 
$esx = Get-VMHost $esxName | Get-View

$netSys = Get-View $esx.ConfigManager.NetworkSystem
$netSys.RefreshNetworkSystem()
$esx.UpdateViewData()

$esx.Config.Network.Vswitch | %{
     Write-Host "vSwitch" $_.Name "Port#" $_.NumPorts "Available" $_.NumPortsAvailable
}

    

    This script is similar to using the Panel in the vSphere client.
    		   
  •  
		     
    using max to get the last question of the information
     
			 Hi all
    

    I have the sample data below
    


    create table ty
( id varchar2(200),
  place varchar2(200),
   ty_date date,
   qty number(30)
   
   );
   
   
   insert into ty
       (id, place, ty_date, qty)
     values
       ('A', 'NY', sysdate, 10);
       
           insert into ty
       (id, place, ty_date, qty)
     values
       ('A', 'NY', sysdate, 11);
     
        insert into ty
       (id, place, ty_date, qty)
     values
       ('A', 'MN', sysdate, 12);
     
        insert into ty
       (id, place, ty_date, qty)
     values
       ('B', 'DC', sysdate, 12);
     
        insert into ty
       (id, place, ty_date, qty)
     values
       ('B', 'DC', sysdate, 13);
     
    examples of data
    

    

    ID PLACE QTY V_DATE
    NEW YORK 11-5/10 / 2011 13:43:08
    NEW YORK 10 5/10 / 2011 13:43:03
    A 12 5/10 MINUTES / 2011 13:43:12
    B DC 12 5/10 / 2011 13:43:16
    B DC 13 5/10 / 2011 13:43:20
    

    

    

    and this is the output I desired. the output is the latest data at the last seconds
    


    ID PLACE   QTY   t_date
A  NY        11    5/10/2011 1:43:08 PM
A  MN        12    5/10/2011 1:43:12 PM
B  DC         12    5/10/2011 1:43:16 PM
B  DC         13    5/10/2011 1:43:20 PM
    I tried to use the following code to get
    


    select id, k.place, k.qty, max(ty_date) from ty k
     group by id, k.place, k.qty;
    but he is robed in the wrong exit and I think it has to do with my group of.
    

    Any help is appreciated.			 
     select id, k.place, k.qty, ty_date
       from ty k
       where ty_date = (select max(ty_date) from ty k1 where k1.id = k.id and k.place = k1.place)

    		   
  •  
		     
    IMAQdx deletes the images, but LostPacketCount = 0?
     
			 
    I use the example of OR 'Grab and Setup.vi attributes' with a run of camera XIMEA USB3 at 60 fps on Windows 7 (i5 - 4310M, 2.7 GHz, 8 GB)
    

    «Description: The Grab and configuration example VI attributes allows the user view the current attributes and settings, update the attribute parameters, acquire images continuously and display images in an image control.»
    

    I made a few changes. I have two image display windows instead of one. In the "': Frame made" event, when the "ActualBufferNumber" is the same, the image is displayed on my left picture frame and when it is odd, he appears on the right. "  My scene evolves at 60 fps synced to the release of material from the signal from the camera ("exhibition-start"), so the same and odd field images are significantly different, and it is easy to differentiate.
    

    It just works as expected. However, at random times, usually several minutes apart, that the acquisition process apparently ignores a framework such as the left and right images are exchanged.  Sometimes he jumps a framework, we get, then jumps immediately another frame, as well as an output image flashes and then returns to the initial display.   I display the IMAQdx 'LostPacketCount' and it is always 0. When the program runs, watch Windows Task Manager using LabVIEW between 14 and 17% of CPU and system total CPU is never more than 41%, so it doesn't seem that the CPU is overloaded.  In addition, the moments of drops of framework do not match the peak CPU use. I'm following up separately from the 60 Hz frame-sync camera output signal and it's precisely stable (with ~ 50 nsec jig on the nominal 16.667 period msec) that you would expect from a hardware trigger, there is no stuttering or gaps here.
    

    'Acquisition of configure' entry I started with 3 stamps, then 6, then 100, but the frequency of the events of frame-depot does not seem sensitive number of buffers. Do I have to have unrealistic expectations of the capture and display 60 fps without frame drops? How to debug this problem?
    			 
    UPDATE:  I tried to run another one "Grab and detect jumps Buffers.vi" which leans on the signal "Stamp Out number" of "IMAQdx is Image2.vi" and it detects correctly ignored by executives. The output of "Jump buffer Count" shows that change between folders in Outlook on the acquisition of 60 frames per second in general fall 5 pictures.
    		   
  •  
		     
    IMAQdx multi-camera systems: shortcuts for composite image sewn
     
			 
    Imagine a system using for example multiple GigE cameras through IMAQdx interface where we want to be a stitched composite of multiple camera views. The principle of sewing is naïve, simple concatenation, one next to the other.
    

    The problem is that, when it is trivial to build a composite image, it is difficult to do this very effectively. Image sizes are large, tens of millions of pixels, so that each copy of questions. Configurations material alternative would open many options but say we are stuck using GigE cameras and (at least initially) the IMAQdx interface. What are the tips or even hacks, you guys can imagine facing this challenge?
    

    I've seen some talk about the IMAQdx capture buffers and it seems to me that one can not manually allocate these buffers or access it directly. The absolute best scenario would obviously be to hack your way around to spread the image data next to each other in memory, sort of as follows in scenario1.png:
    

    

    The foregoing, however, don't seem to be too easy to achieve. Second scenario would be to acquire in the individual buffers and perform one copy in the composite image. See the illustration below:
    

    

    Interfaces usually allow this with relative ease. I have not yet tested, but based on the documentation using ring acquisition of buffer and "Extracted IMAQdx Image.vi" this should be possible. Can anyone confirm this? The copy can be carried out by an external code as well. The last scenario, without ring buffer, using ' IMAQdx to Image2.vi ' might look like this:
    

    

    The second copy is a loss for this scenario should be out of the question.
    

    I hope this makes some. Want you magicians say about this?
    			 
    Unfortunately he has no concept of a "sub-image" where you could have acquired acquire seamlessly in an image that represents a region of a larger image. However, you are right that the acquisition of the ring with the extract is the way to remove a copy. In this mode, the user allocates the internal buffers imaqdx uses by means of standard images, and then they can access those without copying directly. You can simply extract the image of each camera (zero-copy) ring buffer, then use the VI ImageToImage to copy a region in your larger picture (a copy).
    

    Eric
    		   
    •  
          
    Maybe you are looking for