iMovie canvas size

Similar Questions

• Resize an image to fill the canvas size according to height?

  Hi guys,.

  Is it possible to resize a picture to fill the canvas size according to height?

  Currently when I place an image, it fits on width, being a landscape on a canvas portrait image I need to fill the height.

  Any suggestions on the best way to do it, maybe an action?

  Thank you

  Gavin

  If the image containing or the picture may vary in dimensions/dimensions a Scripting approach would seem prudent.

  In the contrary case, a conditional Action may be enough.

• "Canvas size" does not remember last setting used

  I noticed that "Canvas size" does not save the last settings used more in Photoshop CC 15.5. It is located in centimetres every time.

  The "Image size" option screen keeps the last used settings.

  This used to work properly in Photoshop 14 CC.

  Canvas size always comes back to the unit which is defined in Edition > Preferences > units & rulers.

  

  "Image size" in the upper part of the window always the size in pixels and under the print format, but never shows in pixels.

  If your preferences setting is "mm", the print size will be shown in mm.

  If your preferences setting is "pixel", the print size will be shown in cm or mm or inches, but not in pixel.

  Fenja

• What canvas size should I create in Photoshop for the titles of 4K for the cinema?

  I know the resolution, but question canvas size?

  I believe that 4K is available in different flavors.  Safer would be 1920 x 1080 x four, up to 4096 x 2160

  As always, Wikipedia is the source of all knowledge

  4K resolution - Wikipedia, the free encyclopedia

• Why the my canvas size is bigger than my work plan?

  Hello

  I'm working on a larger project, where I have mulitple PSDs linked in a single document. The individual DSP that have all plans of work that are the same size, but in inspection of the size of the canvas on these documents vary considerably in size.

  This causes me some discomfort because:

  -When you place the PSD files in the main document, the bounding box of the PSD is much larger than the graphics I want to place.

  -Second, if I want to resize the size of the canvas on the current related DSP, I am trying, it shrinks the chart down much more that what I would actually. This causes me to have to change the size of each graphical element, which sometimes can be quite tedious.

  In my view, that the size of the canvas should be able to resize the artboard size I'm working on, if only when I have a single work plan I'm working on (which is currently the case).

  Is there a way to adjust PS for the canvas size will correspond to the size of the artboard? Whereas if I adjust the length of the arboard, the size of the canvas reflects the change in size?

  Thank you.

  Unfortunately, it is still an open question in our backlog of work.

  The following workaround solution is clumsy, but should work:

  1. choose the tool work plan.

  2 Unger, the gear icon, deselect auto size canvas. This setting affects only the current document.

  3. adjust the size of your canvas as needed using the Image-> canvas size command. It will remain at that size until you change it again manually.

  Work plan documents do not show the extent of the Web, but there are ways to see: layers of filling (with disabled auto-nid) under all work plans, for example.

• Image adjustment and canvas size does not

  Hello world

  I'm trying to save an action on an open image. I first choose the command "Mount Image" and enter a size of 1580 x 2000 pixels (do not expand). I then choose the size of the canvas and try and enter the dimensions in pixels of 1580 x 2000 pixels but although I input these numbers, when I view the details of this step of action of canvas, he always says height: 2000 pixels, Vertical: Center, but it does not the width of 1580.

  It seems that for some reason any program won't allow me to enter the same dimensions in pixels in two separate measures, consecutive. I remember successfully made this a few weeks ago, but I don't know why it doesn't work now.

  I was wondering if someone could help me out and let me know what I could do wrong?

  Thanks in advance.

  I have never see that happen if you change the two dimensions of the canvas. can you show a screenshot if registered in the palette step actions. Here what I get... If you want to save the step size of canvas after made stage image to save on both sides, you need to change both one side will be 2000 or 1580.  So, you need fix this first. stop recording changes the size of the canvas to 1581 x 2001. Then start of new record replaces canvas size to1580x2000.

  

  When you record steps if you do not change a default option offered Photoshop will not record anything for this option and Photoshop uses its default value.  It's very important when you want things like the name of the current document to use other options as the current path to use. If you change only the saved value will always be used.   Here you want you still want the canvas image size to be extended to the full 1580 x 2000 therefore with other reports l / h of images will focus on a canvas of 1580 x 2000.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• Should what the canvas size I use for my project of e-Learning 8 Captivate?

  Hello world!

  The maximum size of my e-learning project is 740 x 555, so that it can adapt to the size of the LMS. E-Learning has a Table of contents and the skin Editor, but of cause I want to use as much fabric as possible.

  It's been a while since I worked with Captivate and has a fragile memory of the published version adds a few pixels. Is it still OK for 8 Captivate?

  Canvas size what do I use to make e-Learning made the LMS, but always include the Publisher of skin and OCD?

  ARO

  Madeleine

  Are you talking about a normal or sensitive project? Is the table of contents separate or overlay? If it is separate, it will add 250px width if you change the width of the table of contents that is now possible. Ditto for the playback bar: is that overlay or not? If this isn't overlay, the number of pixels added to the height depends on the chosen playback bar. You can check its height by looking at the width of the bottom border in the skin Editor. This lower border fits the selected playback bar.

• Why keep my canvas size smaller than what I get in the boxes?

  I did a book cover for a printing company and they have come back to me twice now - basically, I think that the measures are not good and they may not format correctly for printing.

  The Web is supposed to be 316mm wide and 216mm in height, with a 300px dpi. However, when I look at how big the Web is (Image > canvas size) he always says 315.98 215.98 x, no matter how many times I try to resize it. I'm not entirely sure how printing doing things, but I think this 0.2 mm could make a difference. The same happens when I create a new file. I want to do a 3 mm x 210 mm canvas, because I need a margin of 3mm on each edge (where the extra 6mm in width and height of the A4 size 310 x 210). However, this new canvas is also then 2.96 x 209.97 mm. So when I want to use it as a guide on the edges, I'm a total of 0.8 mm - so I think this could really make a difference.

  I tried to search to see if anyone had the same problem but couldn't find anything. It would be nice if it's just a problem I supervise and allows to correct quickly. Printing needs coverage again as soon as possible, so a quick response would be great.

  I use:

  • 8.1 Windows 64-bit (up to date)
  • Photoshop CS6 13.0.1 x 64

  At 300 dpi, would become 316 mm ~ 3732,28 pixels. Since you need an integer pixel value, the result is the rounded 3732 pixel dimension. Return calculated, which would be ~ 315,98 mm.

  Benjamin

• Custom canvas size?

  Is it possible to change the default canvas size in the Sketch in Adobe Photoshop or Adobe Illustrator online? It would be particularly useful when it comes to the import and paste the other files in the document and not have to worry about issues of scale and size.

  If this isn't the case, I think it's something that needs to be addressed if Adobe is seriously to do right mobile applications.

  and now, our amazing product manager found time for us and the official response is:

  [note as short answer] to sketch the canvas size is the size in pixels of the iPad (2048 x 1536) when you make a shipment of Photoshop.

  We finally have it

• Canvas size / resolution

  I am strongly considering make an iPad and ink and Slide, but the first curious on the resolution of the sketch.  Can define you it?  I know 'Draw' is vector based, but assuming that "Sketches" raster is based?  What I'm hoping to NOT hear, is that ' Sketch is just supposed to be a place to make sketches and work on ideas.  I know tile is 'Sketch' but I want it to be something I can create final images I can print and frame.   Possible?

  From what I can tell, the canvas size is probably the resolution of the screen. My iPad Mini 2 retina has a screen size of 2048 x 1536

• Cropping + change the canvas size

  Hello

  I have a problem (because I'm a beginner in Photoshop), and it's that when I crop and image and try to change the canvas size - change the size because I use a different type of paper - (and anchor the image to the top left), the image looks like the way she was before harvest. Is there another way to do this? I'm doing it wrong?

  Thank you

  Try to use the tool of rectangular selection to a fixed size: 4 in. x 6 in.

  Move the selection where you want it to be.

  Select > Inverse

  Remove.

• Script in Photoshop Actions for the canvas size?

  I have a variety of sizes of illustrations I want to post on my site;  that would take much less time if I could add a white border in Photoshop Actions by increasing the size of the canvas by 1/4 inch.  Thanks for your suggestions, BAB.

  Save a step size of canvas.  Leave the anchor point at the Center. Check relative and the value of 1/2 inch in width and height.  Photoshop will calculate the number of pixels needs to add to increase the width and height 1/2 "and add 1/4-inch canvas on all sides.  If there is a background layer in Photoshop the extra pixels will be 100% opaque and the color can be set in the canvas size dialog box. Can be set to the color of the background sample.  If there is no background layer, the added canvas will be empty.

• Adobe generator: Yes! but not harvest my canvas size (option)

  Adobe = generator isn't there an option where I can maintain original canvas size position?

  I mean: I like that the generator of slices and export every element of the individual layer in a single file... It's good, BUT...

  but I don't want the auto-cropping function to export every single picture in its exact dimensions > > I want an option where you can keep the original size of the canvas and the position of the element in the space of the canvas... is this possible?

  GRAPHICALLY, it is instead: / / / I want an OPTION that do this automatically:

  

  and we will love this feature in Fireworks CC please!

  Hello, Photoshop CC 14.2 now supports padding with layer masks, I've yet to see a description... http://blogs.adobe.com/crawlspace/2014/01/photoshop-cc-14-2-update-jdi-features-mac-proos-x-10-9-compatibility-and-notable-bug-fixes.html.

  More information about this page of the Github generator: https://github.com/adobe-photoshop/generator-assets/issues/40

  (But a generator discussion belong to the beginners forum?)

• canvas size background gray color

  Canvas size sometimes that the canvas extension color is grayed out, this can happen on any ie jpg tiff or PSD file and in any mode can someone tell me how to fix this please

  j

  This means that your image is not a background layer.

  If your image does not have one you can create a background layer of

  any layer pixel selected by going to layer > New > background from layer.

  http://helpx.Adobe.com/Photoshop/using/adjusting-crop-rotation-canvas.html

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-78e3a.h tml

  

• Resize the page only on 1 side (canvas size)

  Hello again!

  I want to resize the page only on 1 side (left or right), as an option of Photoshop-> Image-> canvas size-> choose the side you want to resize.

  Thank you in advance!

  Here is a page that is 4 x 6 inches:

  

  On the Control Panel, click the side of the reference Point (surrounded) to choose which side of the page is huge. Enter a new size. I took 4 x 7 inches: