Desktop blackBerry Smartphones BlackBerry 7105t software

Similar Questions

• Smartphones blackBerry device software upgrade, does not (Bold 9930)

  Bold 9930, Verizon,.

  Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

  7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

  The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

  I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

  I tried to load my old device software but the Desktop Manager will not allow him.

  I reloaded software device 3 times, always the same behavior, always the same error at the end.

  I'm out of ideas.

  Any help?

  Hello and welcome to the community!

  brunostyle wrote:

  I tried to load my old device software but the Desktop Manager will not allow him.

  This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Blackberry Curve Smartphones Downgrade 9300 software

  I downloaded the Blackberry 6 software on my Blackberry Curve 9300 and I noticed that my battery is empty so easily and it is a bit slow and I feel as if it was because my phone does not support very well. Is there a way I can change it in Blackberry 5 software? I found the software Blackberry 5 but I'll click on update and it checks only the software updates and was told it is not new that is not what I want, and when I searched how downgrade, he gave me measures, but I can't find that its telling me to click on my phone if anyone can help me please let me know!

  For now, the oldest operating system loading, I let the downgrade applications as well.

  For example, you could have installed an application compatible only on OS6.

  Also, make sure you do a backup of your device using the Desktop software first. Then you can reinstall all contacts, calendar, etc., would there be problems along the way. Engage with the downgrade by the instructions above.

• Smartphones blackBerry device software upgrade problem

  Hi all

  I have a Blackberry 8310. He was originally AT & T service, but he now has the T-Mobile. It is unlocked and currently leads the software 4.2.2.170.

  I'm moving to 4.5. I downloaded the software from T-mobile, here for the 8320. They have no 8310 software, and told me that it shouldn't make a difference:

  http://www.t-mobile.com/bbupgrade/

  I followed the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_upgrade_the_OS_on_my_BlackBerry%3F

  (I tried method 1 and method 2)

  However, it will not install little matter what I do. I even tried using CrackMem.

  Get to step 6 of method 2 for example, I'm never invited to install the upgrade. When I look into the application loader on BB Desktop under applications to update or install new applications, the software update is never there.

  No idea why the upgrade won't install? Is it because the phone's ex - AT & T?

  One last thing - it was originally hooked up to BES and so had a top COMPUTER policy. I wiped by using method 2 here:

  http://www.BlackBerryFAQ.com/index.php/Remove_IT_Policy

  Any help would be appreciated.

  Hi and welcome to the forums!

  One that you said that the software and the model doesn't matter, said you bad.

  Well, software loading 8320 in to a 8310 photo an accident of room StarTrek carrier... same results.

  Go to the AT & T software download site and get the right device OS for the 8310.

  When you go to install it, you need to remove the provider. XML file. This step is listed in your procedure

  I have the number of site and the version to download for you at the bottom of the post.

  When you start the download of software peripheral BONES of AT & T, save the file to disk, do not run.

  When the download is complete, then go to the directory on the PC you have loaded to and run the

  self-extracting file. The software will be installed in the directories in the files of the Office Manager

  If the application loader will find it.

  Follow each step exactly as written now from the first step of the procedure of FAQ.

  Thank you

  Bifocals

  https://www.BlackBerry.com/downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4

  BlackBerry Handheld Software v4.5.0.152 (Multilingual)
  Package Version: 4.5.0.152
  Composed of:

  • Applications: 4.5.0.110
  • Software platform: 2.7.0.90
  • File name: 8310M_PBr4.5.0_rel152_PL2.7.0.90_A4.5.0.110_AT & T .exe
  • File size: 89,91 MB

• BlackBerry Smartphones LOST after installation of BlackBerry® Device Software

  It's very frustrating!

  After you have installed the latest version of BlackBerry® Device Software od yesterday, my contacts on my BB and my BBM contacts were lost...

  Even my Brickbreaker game is gone. My game folder was empty. How can I get that again? I tried the application world, but in vain.

  Fact!

  Just tied your BB to the PC, then once the BB Desktop Software appears, click on Application Loader. Find the Brickbreaker Application, then click on [+].

  Don't forget to press APPLY to complete the update

• Charging Curve 8900 Smartphones blackBerry device software

  Hi I have a problem with my Blackberry device software, how to remove and re intsal software on my Curve 8900?

  Manual device OS upgrade instructions:

  1. start by searching for your operator and the system operating file that you want to use.

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

  3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

  6 remove the internet connection for PC and reboot the PC.

  7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

  8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

  Take advantage of the new operating system.

• Upgrade error blackBerry Smartphones BBDM 6 software

  I connected my Bold 9000 from ATT to 6 BBDM and chose to update the software of the device from 4.6 to 5.0.

  I got the following error:

  An error occurred when downloading software for your device. Please check your internet connection or try again later, if the problem persists.

  Does anyone have any idea of what is happening and why I can't upgrade. My internet works fine, it's how I posted this message!

  Thanks in advance

  Try to download and install the BlackBerry Device Software on your PC, your provider's site in this list: http://bbry.lv/ad7CII and install then on BlackBerry via Desktop software-> tab Device-> Update my device.

• Smartphones blackBerry Reload Software: 507

  Hello

  Excuse my bad English. But I'm French.

  I have a BB Curve 8520.

  I want to upgrade my phone. But when I want to do, the software tells me that an error has occurred. My phone is no longer a terse message: "Reload Software: 507.

  I can't use it.

  Help me please...

  

  Error 507 means that the device doesn't detect any operating system installed on the device.

  See the link below to download it and follow these simple instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  VIA | JSanders

  http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/error-507-reload-software/m-p/1477...

• I could develop Java Application for Blackberry device software version 5.0 to 6.0 JDE

  Hi, expert,

  I saw this line of the ' BlackBerry Java Development Environment - 4.7.0 - fundamentals Guide'.

  It is said:

  ===============================

  With each major version of the BlackBerry Device Software and the FMV of BlackBerry, Research In Motion includes the
  corresponding Java API and version of the BlackBerry® Java® development environment. The version of the BlackBerry device
  Software determines the version of the BlackBerry® integrated development environment that you can use to develop
  applications. For example, RIM released BlackBerry Device Software version 4.0 and BlackBerry JDE version 4.0 in even
  time. BlackBerry JDE version 4.0 supports APIs that were introduced in BlackBerry Device Software version 4.0
  and BlackBerry JVM version 4.0.

  The applications that you create by using BlackBerry JDE Version 4.0 only work on BlackBerry devices
  running BlackBerry Device Software version 4.0 or later.

  =========================

  The last sentence talking about version 4.0 of JDE. I think that would mean that I could not develop a java application on JDE 6.0 for Blackberry 5.0 version of the software, even if I do not use any new API to 6.0. However, it seems to me that it is a useless limitation. Could someone throw some lights on it?

  I'm going to agree with superdirt here.

  I have the 5.0 OS update of applications work well on OS 5.0, 6.0 and 7.0 of the OS OS phones.  I try not to recompile for levels of the OS, if I can, and so far I've been perfectly safe with OS 5.0 running on the later levels of the operating system.  So you should be able to get away with just using OS 5.0.

  Not that it is important for you, but I just thought I documents some historical information about level changes.  .

  As far as I know it 2 change cod in the file format, one to the 4.0 OS and the other in OS 4.2.  Therefore, if you want to run anything in OS 6.0 or above, it must be compiled in OS 4.2 or higher.  Again, I have applications compiled to OS 4.2 running on OS 6.0, without no problem devices.

  There have been changes to the API - the result is that the code that works in OS xx does not work in OS yy where yy is after xx.  I hit a few of them and have so far managed to rework the code so that it works very well on both levels of the operating system.  In general it is things that I do wrong anyway, as the older operating systems (from memory) are not as strict on when the event Thread must be used.

  The problem with OS 4.7 compatibility is an impact and to get more of this, for devices touch screen only, I compile using OS 4.7.  If an application that uses only the functionality that was available in the OS 4.2, I compile on OS 4.2 for non touch screen phones and OS 4.7 for touchscreen phones.  And everything works fine.

  I hope this helps.

• Differences between the version of BlackBerry Device Software and platform. Help, please...

  Hi guys!

  I'm really confused... Help, please!

  We have developed applications for our customers. We tested with our BB8700 and it works fine.

  We used JDE4.2 for development... and we think that it will work on v4.2 based handsets.

  But our customers wrote that it works on v3.7. Why? Is this possible?

  I looked at the information about my 8700 device and then noticed: v4.2.1.107 (platform v2.3.0.84)

  -What are the differences between the version of BlackBerry Device Software and platform?

  Possible customers spoke of version 3.7 of the platform?

  There is a list of the devices, where we can find the version of BlackBerry Device Software by BlackBerry device model?

  Or where we can find information about the models of devices that will support our application?

  Thanks in advance!

  AFAIK there is no version 3.7 platform.

  Customer talking about the OS version.

  So, if they have the device OS version 3.7 you must use JDE JDE 3.6, 3.7 or older.

  Or take updated device OS if the necessary software is available.

• Desktop blackBerry Smartphones software

  I am away from home and have neglected to put office software preconfigured for my Curve 8330 on my laptop.  When I go to the BB download page nothing jumps on me and said of desktop software preconfigured for Curve 8330.  Does anyone know what version of the software should I use?

  Here is the link to the desktop software

  http://NA.BlackBerry.com/eng/services/desktop/

  Here is the link to the OS software just in case you need it too.

  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

• Desktop blackBerry Smartphones Downgrade Software

  Good afternoon!

  Tour 9630 V4.1.0.40, using Sprint as a server

  I just downloaded the most recent software 6.0.0.43, unhappy change program office update that created and you want to revert to the previous version on which I had more control. Can locate the method of decommissioning of unit but no office.  Should I uninstall and reinstall?  Could take back me to 18 months.

  Uninstall the current DM.

  Restart the PC.

  Install the old.

  For a clean uninstall of Desktop Manager
  http://www.BlackBerry.com/BTSC/KB02206

• Problems for Smartphones download blackBerry Desktop Manager for Blackberry 8310 software

  My Blackberry user Tools CD is scratched so I downloaded the portable version 4.2.2 Desktop Manager to my new computer.   The download seems to work and it goes through the installation process, however, when I restart my computer, that program does not appear in my programs list or is an icon that appears on my desktop to initialize the Desktop Manager.   I can see the program when I go to my control panel and find the Add/Remove programs.  I can't find the program anywhere in a list of files that you want to initialize it.  I have removed the original program and have downloaded the 4.2.2 version several times with the same result.  I even tried a different version of the Destop Manager with the same result.  I tried to connect my phone to see if the computer would recognize my Blackberry and there he only recognized as an external storage device.  Please let know us if anyone has a work around to initialize program.

  Thank you

  Hi and welcome to the forums!

  Use the following links to remove the old facilities.

  Load the last 4.7 DM and get the guide.

  Thank you

  Bifocals

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...

  http://NA.BlackBerry.com/eng/deliverables/5837/BlackBerry_Desktop_Manager-4.7-us.PDF

  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

• Clean of Smartphones blackBerry legacy software reloading

  Dear Sir.

  May I know the step by step to perform a backup on a Blackberry Smartphone, clean reload of software v5.0.0.1345 (all languages) and catering for the following BlackBerry model.

  Model: BB9300 smart 3G curve phone

  Hello

  Download the appropriate here desktop software

  KB13427

  Install it and use it to perform a backup to save it on your computer where you will be able to locate it.

  Then get the operating system of your device to the correct carrier and geographic location

  http://us.BlackBerry.com/support/downloads/download_sites.jsp

  Then, connect the device to your computer and launch the desktop software. If via v6 then to the device at the top left and select update my device following the on-screen instructions.

• BlackBerry help software I need assistance for 10 of BlackBerry Desktop Software install v1.2.0.58 (Mac OS)

  I downloaded the installer of 10 BlackBerry Desktop Software (Mac OS) v1.2.0.58. I can not install on my mac pro book. I use MAC OS Sierra version 10.12

  Help, please

  Note in this KB part where it says:

  Please note: macOS Sierra is not supported.