Implement the workflow automatic and level control

Similar Questions

• Cannot display the properties of Amplitude and level controls

  I'm new to LabVIEW and just installed ver 8.6 on my machine. When I open the TutorialGenAnalyzeDisp1.vi, the run button is disabled. When I double click on the Amplitude and measures of level, I get a dialog box says "cannot display properties. If I click on the run button, I get an error message: "errors of block diagram / Subvi 'Amplitude and level measurements': Subvi is not executable."

  I have the LabVIEW base development system. Is it possible that I don't have that element in my library or an installation problem? I look forward to re - install LabVIEW. It took over 3 hours to install.

  Hi jdai

  The Amplitude and the level of the Express VI measures is included in LabVIEW complete edition and professional development systems, not in the database. So, as you think, you do not have some of the elements necessary for the execution of this VI.

  Best regards

  David

  NISW

• Manipulate the controls in the different pages and different controlled beans

  Greetings. JDeveloper 11.1.2.1. I have some questions on how to access a bean managed in a different JSF or Jsff pages.
  
  I have to jsf pages. hand. JSF that contains dynamic regions. Main.JSF has buttons on it that are managed by a bean view-reach level successful. The buttons are disabled depending on how dynamic region go you. If I move to the form.jsff, for example, the "GO to the FORM" button is disabled.
  
  Main.JSF - home page contains dynamic regions (a holding table.jsff taskflow and an another taskflow taking into form.jsff).
  TableTaskFlow - contains table.jsff. Table.JSFF has a CHANGE button which will take you to Form.jsff.
  FormTaskFlow - contains Form.jsff. (form.jsff is also in the taskflow taking into table.jsff)
  
  Main.JSF has buttons that are across the scope view. When you press certain keys, dynamic regions are changed, and some buttons becomes disabled.
  
  Table.JSFF has a CHANGE button which will lead you to the Form.jsff. Button change is a request-scope bean
  
  Form.JSFF has a button that takes back you to the Table.jsff. "Back" button is a request-scope bean.
  
  The Main.jsf bean, I am able to disable a button by calling its name of the variable and .setDisabled (false):
  
  ex:
  mainGoFormBtn.setDisabled (false);
  
  
  What I do is press the ASSEMBLY (on the Table.jsff and go to the Form.jsff), but some keys on the main.jsff (outermost page) have become invalid.
  
  However, I'm not sure how to call variables and set them off in an another bean. I tried this code and it worked in Java (I was able to select the variable and set it using the drop down menus and compile it), but when I ran the form, he gave me a pointer null expression error message.
  
  mainManagedBean n = new mainManagedBean();
  n.navMainGoForm.setDisabled (true); to do this, I had to put the variable for this button to the public...
  
  Then I tried this:
  
  mainManagedBean n = null;
  n.navMainGoForm.setDisabled (true); to do this, I had to put the variable for this button to the public...
  
  
  I do not know how to reference a button on a page different jsf in a different grain and also a bean that is located in a region that is 'different '.
  
  Thank you
  Stuart

  Hello

  define an input parameter of workflow for the managed bean you carried in sight. Then, on the binding of workflow, you configure this bean as an input parameter. If you save the bean in a range of memory in the workflow or a managed bean that is, then you can access the functionality of bean from anywhere in the called workflow.

  example:

  1 ParentPageBean (ViewScope): accessible under parentPageBean
  2 InputParameter taskflow: parentPageBean--> value: #{pageFlowScope.parentFlowBeanReference}
  3. the flow binding task parent pageDef: parentPageBean--> value #{viewScope.parentPageBean}
  4. then, in the workflow, you solve #{pageFlowScope.parentFlowBeanReference} to access the bean

  To avoid dependencies between the parent and the workflow, you must implement an Interface in the ParentPageBean (e.g. ParentPageBeanInterface) so tha in 4. the type cast is at ParentPageBeanInterface

  Another option that works - drank only if the activation/deactivation can be determined by the current view Id is displayed in the area is to define a (property) RegionNavigationListener on af:region

  Frank

• I use the latest version of firefox, but cannot print all downloads. I tried to use the icon to print the downloaded form and also control P

  I tried using the icon of the downloaded form printing and also control P, but only get a blank page. I even changed my printer, but it did not help. My print menu looks the same, and I have quite everything, print only with downloaded files.

  Hello, it's currently a bug in firefox's built-in pdf viewer that is studied by our developers. in the meantime, you can use a plugin third pdf as Adobe that you can enable in the firefox options > applications -scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• How to move the hard drive to external hard drive backup and how to make the backup automatically and regularly

  Original title: EVOLUTION of BACKUP

  I SAVED IT ON THE HARD DRIVE TO PUT IN PLACE TO ENSURE THE GUARD. NOW, I HAVE A LIL BOX IS AN EXTERNAL HARD DRIVE, I GUESS. I GOT IT FOR THE MEMORY, LIKE A BIG THUMB. SAYS ITS NEED F HOW TO BACKUP IT (MY LAPTOP) THIS AUTOMATICALLY AND REGULARLY. HELP PLEASE, THANK YOU?

  Hello

  You can try the following methods and check if it helps.

  Method 1: Change where you back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files

  Method 2: Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  Reference:
  Back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  Backup your files: http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  

• The workflow configuration and troubleshoot

  Cheap DBA
  
  Please provide me with documents such as how to configure the workflow and how to hurt to pull the workflow.
  
  Best regards
  SG

  SG,

  Please refer to these documents.

  Note: 396314.1 - Oracle Workflow Documentation Fund, exit 12
  Note: 453137.1 - Oracle Workflow recommended output version 11i and 12
  Note: 231286.1 - configure the workflow based on Java Notification Mailer with Oracle Applications 11i
  Note: 249957.1 - example of configuration Workflow Notification Mailer with the Oracle Applications 11.5.x Java
  Note: 564394.1 - how to troubleshoot problems when the Workflow Services go down
  Note: 463354.1 - how to solve errors "Validation failed" when you start mailer
  Note: 753845.1 - how to perform a significant SMTP Telnet Test to solve the problems of Java Mailer

  Applications releases 11i and 12
  http://www.Oracle.com/technology/documentation/applications.html

  Kind regards
  Hussein

• In the page hotmail and toolbar controls have disappeared, where are they? ___

  I can't find where to put these things in return; Refresh, recycle, back, home, file, view, tools, etc. Where do I configure them?

  It is the Vista desktop and personalization Forum.

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  Link above is on the Hotmail Forums for Hotmail issues.

  See you soon.

  Mick Murphy - Microsoft partner

• Questions and Confusion with the game automatic and unable to implement the ReadyBoost for a storage device

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  Hey RayRay43

  You must make sure that the flash player is suitable for readyboost

  read all the information on the setup of readyboost to bleepingcomputer tutorial link below

  http://www.bleepingcomputer.com/tutorials/tutorial136.html

  have a happy holiday season

  Walter, the time zone traveller

• Regarding the Model layer and data controls

  Hello
  
  I have a small query on the design of an application of the ADF.
  
  Scenario:
  I have a class (Model.java) in the model layer queries who manages all databases and the calculation of the other partners.
  I have a class (BackingBean.java) in the view events related to the layer of controller, which is a bean of support and manages all actions.
  
  Query:
  How to access the methods of Model.java of BackingBean.java for that architecture is not broken.
  
  Proposed solution:
  1. I create a data control that exposes all the methods and I give a call back bean by using the binding operation
  2. I call directly the Member of the class of functions of bean support and not through data controls.
  
  Which should be a better approach to 1 or 2 or any other suggestion.
  
  Thank you
  Rohit
  
  Published by: rohit6699 on March 28, 2012 12:13

  Data controls to "hide" the implementation of the underlying data source and also give you a way uniform (standard) access and data binding. It would be the main reason that I said "#1".

• The aggregator project and navigation control

  I want to use the aggregator to combine multiple SWF files, but need to control navigation of the learners for a compliance project. Is there a way to prevent the learner modules to jump and a way to ensure that they consider all slides when you use an aggregator project?

  Hi Jay

  I do not mean that it is impossible to create this situation. But it certainly won't be a cake walk. You need emissions pretty fancy and probably some Flash Cookies to accomplish it.

  You said:

  I would use the aggregator to combine multiple SWF files

  I hope that you are not under the false impression that you drop maybe five SWF files in a project aggregator and magickally end with a single SWF file that contains the swarm. You end up with an extra SWF. So instead of five, you should have six.

  See you soon... Rick

• Once I have to zoom on video in post production using the effects Panel and movement controls > scale how can I keep the sharpness of the image?

  How can I keep the sharpness after I Zoom.

  Never exceed 100% scale.  The image is going to deteriorate.

• How to implement the iconic buttons and Read_Image_File with dynamic URL?

  According to the documentation, Oracle Forms 11 g REL2 can now can have images defined by dynamic URLS.
  
  Can anyone provide an example or see any documentation it?.
  
  Best regards, Luis... :) =

  Try this:

  READ_IMAGE_FILE ('https://forums.oracle.com/forums/themes/english/resources/oralogo_small.gif', 'URL', 'block1.image1');

  Remember that the images loaded via a url can be saved to the database.

• I get a popup that says no audio device imput found. Make sure that your audio hardware is workingand check your audio configuration in the audio device and sound themes control anel

  I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes

  Hello

  1. what operating system is installed on the computer?

  2. when exactly you receive this pop up?

  3. able to play sounds using Windows Media Player?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the troubleshooting provided in the link below steps to solve the problem.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Is there a way to authenticate a wireless connection in Windows 7 without defining the wireless to connect automatically and then restart?

  Windows 7 machines tell unauthenticated when connected wireless to our domain. The unauthenticated message disappears if we connect automatically to wireless connection and restart. Is there a way to authenticate without a connection to the wireless automatically and restart? For example, I would like to connect manually to the wireless, whenever I want and as soon as I do that authenticates.

  I use a router configured medialink wireless more as a wireless switch. DHCP comes from our server. Security is WPA-Personal. I also tried to use a different wireless router configuration with a radius with PEAP server and that does not work either. The server radius authenticated the user, but the message on the computer remained the same: "domain.local 2 unauthenticated.

  Each way in which users are able to access the resources, but this message is driving me crazy. We do not get this message on all XP machines.

  Client side, I tried to turn on the discovery of the network, joined the field, turn off any firewall (only using windows), updated drivers NETWORK card, update the firmware on the router, etc..

  Am I missing something?

  Thank you!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• My function keys and volume controls will no longer work. Help.

  I'm unable to use my function keys and my volume level is not displayed on the screen as before.  I think that maybe the software controlling the function keys and volume control screen is damaged or not loading.  HELP please.

  Hello

  Download and install HP Quick Launch Buttons on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

  Once the installation is complete, restart the laptop.

  OSD volume is provided by HP MediaSmart SmartMenu, so if you still don't see display, try the method in the link below and use Recovery Manager to reinstall this app - NOTE: you need at least one other application MediaSmart must be already installed, IE HP MediaSmart DVD, before you reinstall the Menu Smart.

  http://support.HP.com/us-en/document/c01868333

  Kind regards

  DP - K