iPhone 7 screen purge / uneven edge of the screen

Similar Questions

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• IPhone flattened my mother fell and broke her screen and I bought a new Yvonne, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  IPhone flattened my mother fell and broke her screen and I bought her a new iPhone, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  Yvonne > > iphone

  Sorry

• iPhone 6plus iOS 9.3.5 since the last update my touch screen is freezing. Has yet to be decided. Connection to the computer did not help. I had to wait my battery died to restart. Once restarted I could use touchscreen but it now

  Aggravated with the update from my iPhone

  It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5.

  1. A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phone has rebooted.
  2. Since this restart my touch screen hangs for 5 minutes at a time at least 5 times per hour.
  3. My screen goes completely black 20 seconds in the reading of an article. I have to refresh my browser at least 6 times by reading an article on the web.
  4. If I'm in iBook I can't read yet a page without the screen goes black. I hit the home back to iBook button try to keep reading where I left off the coast, but within 20-30 seconds it goes back to black.
  5. While I'm typing, even this message, I hit the button of the space and the words are charged or inserted which does not appear. I myself taking much time to type anything bc I have to go back and get rid of the words that the phone has decided to him only to change or insert.
  6. Improvements that never going to this last day f__d my phone. Difficulty what you did in the last updated bc I will eventually lead to an Apple Store and throw the phone home.

  What have I tried to fix it. Everything. For many in the list and you already know what the normal things are that the average person would be difficult it phone. I have no problems until I updated to iOS more recent so caused my problems of telephones you people. PLEASE FIX NOW

  Thank you

  Debbie

  I posted my severe issue with the iphone since the last update August 28, 2016 at 12:27 and watch to see when your system has declared that I posted my question that I call a problem so I guess you can add that to my problems too. OH nothing automatic record is

• Is it possible to have an iPhone all nine 6s with spots on the screen changed?

  Hello

  I bought an iPhone 6s a few days ago, of the Finland via a wireless carrier (Elisa). Right after I remove the screen protector, I realized there are a few spots on the screen that would return a moment after them wiping. Next day I took the phone to the operator and asked them if they could replace it because I had just bought it. (I did not ask a refund.)

  The clerk denied the right for my defective phone replacement and instead offered to send it to the service center to fix it. I insisted on the fact that in the interest of customer satisfaction, the devices usually receive a certain time to return where they do not meet expectations. The clerk said there was no other way, but having repaired. I wasn't happy, but since there is no other solution I had to restore my phone after two days of buying it.

  Now, given that I bought from an operator and not an Apple store, I wanted to make sure the conditions of Apple in these cases. I find it very unlikely that Apple services do not immediately replace a defective product when it turns therefore upon purchase.

  Can I do right now to make them replace my phone instead of repair?

  Thank you.

  Hello

  You should get a replacement iPhone, but that they must check first for any liquid.

  In the meantime use SIM card in another phone if you have one.

  It will take a few days to sort out.

  See you soon

  Brian

• iPhone 6 screen goes black randomly. Hard reboot solves the problem temporarily

  Hi all

  My iPhone 6 screen goes black randomly (usually during sleep) and when it happens, the fact response to touch or no sound. I know that the phone is on because I can always call another phone and it sounds on the line, but as I said the iPhone does not ring. Hard reboot (press home + power button for a while) will not solve the problem immediately after the restart, but after some time (hours or days), it goes black again and I have to do the same thing.

  No idea why this is happening? Is it a software or a hardware problem?  I'm really curious to know how to restart the phone resolves the problem.

  I am not able to take it to the bar of the kind of these days because of my busy schedule. I wonder what they need to replace when I take it to the store.

  Please, share your ideas.

  Thank you

  Sounds like a problem of software for me, especially because it forces is a troubleshooting step software, and you say that solved the problem (of least temporarily).

  However, I still think that the Genius Bar would be a good idea. They have access to diagnoses that are not accessible by the user, who can easily identify which applications or processes are causing the problem. I think that they can also do this by phone, but I rarely call support so I am not sure.

• I have a very serious problem. My iPhone 6s fell and has cracks on the screen. What should I do now?

  I have a very serious problem. My iPhone 6s fell and has cracks on the screen. What should I do now?

  Warranty Apple does NOT cover accidental damage.

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• S2440L, discoloration along the edge of the screen

  I noticed a problem on my dell s2440l. It seems to be a change in color even along the edge of the screen. It is difficult to explain or to capture on camera. It is more noticeable on the shades of gray. Just check along the border of the screen in the picture. Any idea on what this could be?

  The question is called "Frame shadow" and occurs over time. If still under warranty to the original purchase of Dell, Dell will Exchange it.

• the mouse cursor suddenly began to be stuck at the edge of the top or bottom of the screen.

  using Win 7 and all of a sudden today the mouse cursor would not and was stuck at the bottom or top of my edge of the screen.  I tried several different mice, both wireless and wired without result.  I rebooted several times and made a thinking system restore date was also a problem. I looked everywhere for a solution and can not find a.  I don't think it is specific drive due to different types of mouse, I've tried.

  Help!

  Hi RussCFP,
   
  1. have you installed the latest drivers for the mouse on your computer?
  2 did you check for any yellow exclamation point in Device Manager?
  3. other USB devices work properly?

  Method 1:

  I suggest to start in safe mode and check that the device.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode 
  Method 2:

  Try to run the troubleshooter and check.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   
  Method 3:
  
  Try to uninstall and reinstall the drivers for the mouse on your computer, to do that follow the steps below.
   
  a. Click Start and then click Control Panel.
  b. double-click System.
  c. click on the Hardware tab.
  d. click on Device Manager.
  e. expand mice and other pointing devices.
  f. right click on the device IntelliMouse that you want to delete and then click on uninstall.
  When the confirmation message appears, click Yes.
  Note Your mouse does not work at this stage.
  g. restart the computer.
   
  When your computer restarts, Microsoft Windows automatically detects the hardware change.
  Install the mouse driver and check its operation.
   
  Contact your hardware manufacturer for the latest drivers for your mouse.
  

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• prints of paw around the edge of the screen

  Inspiron 6400 Windows xp version 2002 service Pack 3

  Paw prints around the edge of the screen concealing information for example time

  Attach an external monitor to check that the error does not appear here.  If it is not the case, you will need a new Billboard.

• Anyone know why I have some formatting issues with my Tablet and phone of the sites? I only have the layout of office. There are banners and footers only reaching is not the edge of the screen.

  I only have the layout of office. As I had problems with the phone and Tablet page layouts. However there are are the banners and footers only reaching is not the edge of the screen. This is only a problem when accessing the site via a phone or a tablet.

  the site is www.excellententertainment.biz

  See you soon

  Hughie

  Do a Select all on your pages (most likely a master page is it effects all pages) and you'll probably find an empty element or element that goes beyond the edges of the design to the design of your office.

• How to disable 'edge of the toolbar' in Vmware Player / full screen.  ???

  Hello from Spain, I wonder if you can disable edge of the toolbar, when you are in full screen view.

  In Vmware Workstation, you can do this with the option ' display the edge of the toolbar when this marking " , but I can't find any similar option in Vmware Player.

  Anyone has an idea on how to do that?

  Thanks for your help...

  Edit the UNK file, add

  Pref.vmplayer.fullscreen.nobar = 'TRUE '.

• Bar menu submenu showing off the edge of the screen

  I have a menu bar with a MenuBarItem which is placed at the top right of my app. The first time I click on the MenuBarItem, part of the Menu is displayed at the edge of the visible screen. The second time I click, it appears correctly. Everyone knows this? Is there a workaround? I submitted a bug for this issue, but I would really like to find a workaround.
  
  Thank you.
  

  @Greg:

  Thanks for the link. Workaround on this page was not usable for me, but then I finally linked to this bug:

  https://bugs.Adobe.com/jira/browse/SDK-15555

  There, I found the following solution, and it seems to work as I need it now. (Workaround to this link uses a listener/handler for the INITIALIZE event, but the Menu does not yet exist at this point, so I used the CREATION_COMPLETE event).

• IPHONE 6 SCREEN FLICKER, GHOST AND NO ANSWER KEYS WHEN WAKING UP

  WHENEVER MY IPHONE 6 MORE THAN 128 GB REMAINED IN MODE 'SLEEP' FOR A EVERYTHING (½ HOUR OR ALMOST) WHEN I WAKE IT UP, THE SCREEN FLICKERS BETWEEN THE UPPER EDGE, AND THE SCREEN DOES NOT MEET ALL KEY COMMANDS. I REBOOTED, I RESET, I DELETED AND RESTARTED AND IT STILL DID THE SAEM THING. AFTER A FEW MINUTES OF WATCHING MY PHONE THROUGH DIFFERENT APPLICATIONS AND SETTLE DOWN, IT STARTS TO ACT NORMAL. THIS ALL STARTED AFTER THE LAST UPDATE OF IOS. (9.2). ANY HELP WOULD BE APPRECIATED.

  Since you've already done the troubleshooting part software, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support