Implementation of 7.2 on my STR-DN1050

Similar Questions

• My STR-DN1050 goes to sleep every 19 minutes

  I now have my STR-DN1050 configuration in a 7.1 configuration and I am currently feeding inside my computer via a HDMI cable and output to a TV screen via the output CD/SACD.

  Every 19 minutes, regular as clock work, the receiver goes into sleep mode. This does not happen when you watch a BlurRay (at least as far as I remember).

  Anyone got any ideas?

  Hi are Paddy, we meet again!

  In fact you almost see right, that's 20 minutes to be precise!

  Your STR-DN1050 has a power save feature called [Auto Standby].

  In addition to this, there is also a sleep timer, but your problem is related to the expectation of the car which you can turn off if it is a problem. I don't know why this turns on when you use a PC connected, but most likely the receiver does not detect the source of the signal in the same way as a BD or DVD.

  You can read more about it and how to disable the manual online here:

  The receiver turns off automatically.

  If you want to download the full manual for your computer, see this link: Manual STR-DN1050

  Feel free to give congratulations and to mark this message as "Accepted Solution" if she answers your question, thank you!

• Str-DN1050 no picture

  Hello!

  Suddenly have a problem. But there is no picture, only sound.

  In the evening, everything worked very well and the morning no more picture.

  It's like the HDMI OUT not to send signal.

  It doesn't matter which input select.

  Tried the plugin power on and out and disconnected the power receiver and waited.

  Even changed hdmi cables.

  No luck.

  Any suggestions?

  Hello

  During your troubleshooting have you tried to perform a reset of your decoder?

  If not it might be worth a try, here's how:

  Returning to the default settings

  You can erase all memorized settings and restore the receiver factory default settings by following these steps. This procedure can also be used to initialize the receiver before using it for the first time. Be sure to use the buttons of the receiver to perform this operation.

  1. turn off the receiver.

  2. Press (on/standby) on the receiver for 5 seconds. [COMPENSATION] appears on the Billboard for a while, then go to [CLEARED!].

  Note

  It takes a few minutes for the memory to be erased completely. Do not turn off the receiver until [CLEARED!] appears on the display panel.

  Please let us know if this solves your problem.

• Implementation of locationlistener MIDlet has no effect on jde 4.5.0 or curve 8310

  Hello to the blackberry,

  you try to run the midlet on the jde 4.5.0 or on my 8310 device does nothing (no coordinates and no error).

  I am able to run the method-getLocation(-1) of rental in the most complex midlets,

  but not the locationListener in this very simple (see the following code).

  Why? According to me, it takes a very small thing to make it work.

  I must be blind or...? ;-)

  Thank you very much for your help.

  Christoph rappp

  package fortab;

  Javax.microedition.midlet import. *;
  Javax.microedition.lcdui import. *;
  Javax.microedition.location import. *;

  public class fortab extends MIDlet implements CommandListener, Runnable, LocationListener
  {
  Private TextBox infoBox = new TextBox("Info",null,5000,TextField.ANY);
  CMD_EXIT private final order = new Command("Ende",Command.EXIT,0);
  Private final command CMD_LOCATION = new command ("Position", Command.ITEM, 1);

  protected void pauseApp() {}

  protected void destroyApp (boolean arg0) {}

  ' Public Sub locationUpdated (LocationProvider provider, a place)
  {
  Coordinates of c = location.getQualifiedCoordinates ();
  If (c! = null)
  displayText ("lat" + c.getLatitude () + "lon" + c.getLongitude () + "alt" + c.getAltitude()+"\n\r");
  }

  ' Public Sub providerStateChanged (LocationProvider provider, int newState)
  {
  }

  protected void startApp()
  {
  infoBox.addCommand (CMD_EXIT);
  infoBox.addCommand (CMD_LOCATION);
  infoBox.setCommandListener (this);
  Display.getDisplay (this) .setCurrent (infoBox);
  }

  public void commandAction (command c, displayable d)
  {
  If (c is CMD_EXIT)
  notifyDestroyed();

  If (c is CMD_LOCATION)
  New Thread (this) m:System.NET.HttpListener.start ();
  }

  Private Sub displayText (String str)
  {
  infoBox.insert (str, infoBox.size ());
  Display.getDisplay (this) .setCurrent (infoBox);
  }

  public void run()
  {
  Try
  {
  Cr criteria = new Criteria();
  cr.setHorizontalAccuracy (500);
  LP LocationProvider = LocationProvider.getInstance (cr);
  If (lp! = null)
  {
  infoBox.removeCommand (CMD_LOCATION);
  lp.setLocationListener (this,-1, -1, -1);
  }
  }
  catch (System.Exception e)
  {
  displayText (e.getMessage ());         }
  }
  }

  Thank you for motivating words, david.

  After all try for the last days, I finally changed the - 1 to 1 and GOT a FIX.

  Thank you.

  Good day.

  Christoph rapp

• Poor implementation of "box, when then else"?

  It seems to me that my expression < next > is executed even if < WHEN > is false. I have a queury with LISTAGG, and if there are too many people, the string exceeds the limit of 4000 characters. I tried to use "BOX WHEN" to give a message instead of the list of names, but I always get an error.
  
  I have reproduced this with the HR schema. (A simple example ;))
  
  This was my first expression:

  SELECT department_id
  ,LISTAGG('Employee_ID: '||EMPLOYEE_ID ||' Name: '||FIRST_NAME ||' '||LAST_NAME ||' Email: '||EMAIL||' Phone number: '||PHONE_NUMBER||'Hiredate: '||HIRE_DATE, ',') WITHIN GROUP (ORDER BY hire_date) AS Employees
  FROM employees e
  GROUP  BY department_id;

  throw this error:

  ORA-01489: resultatet av strengsammenkjeding er for langt
  01489. 00000 -  "result of string concatenation is too long"
  *Cause:    String concatenation result is more than the maximum size.
  *Action:   Make sure that the result is less than the maximum size.

  With this expression I do not exceed the limit of 4000 characters and the message "too many employees" are correctly displayed.

  SELECT department_id
  ,CASE WHEN ((select count(*) from employees where department_id=e.department_id) < 30)
  THEN (LISTAGG('Employee_ID: '||EMPLOYEE_ID ||' Name: '||FIRST_NAME ||' '||LAST_NAME ||' Email: '||EMAIL||' Phone number: '||PHONE_NUMBER, ',') WITHIN GROUP (ORDER BY hire_date))
  ELSE 'Too many employees'
  END AS Employees
  FROM employees e
  GROUP  BY department_id;

  For this Department 50 expression exceeds the limit of 4000 characters, and I get the above error. But the 50 Department has 45 employees and should not be the same in the part 'THEN'
  

  SELECT department_id
  ,CASE WHEN ((select count(*) from employees where department_id=e.department_id) < 30)
  THEN (LISTAGG('Employee_ID: '||EMPLOYEE_ID ||' Name: '||FIRST_NAME ||' '||LAST_NAME ||' Email: '||EMAIL||' Phone number: '||PHONE_NUMBER||'Hiredate: '||HIRE_DATE, ',') WITHIN GROUP (ORDER BY hire_date))
  ELSE 'Too many employees'
  END AS Employees
  FROM employees e
  GROUP  BY department_id;

  Oracle is a very silly implementation of ' BOX WHEN.. "or I do something wrong?
  
  I can solve this another way?
  
  Kind regards
  Thomas

  A way out could be

  SQL> SELECT department_id, SUBSTR (NVL (listagg (str, ',') WITHIN GROUP (ORDER BY hire_date), 'Too many employees'), 1, 20) || ' ... ' employee
      FROM (SELECT department_id,
                   hire_date,
                   CASE
                      WHEN COUNT (*) OVER (PARTITION BY department_id) <= 30
                      THEN
                            'Employee_ID: '
                         || employee_id
                         || ' Name: '
                         || first_name
                         || ' '
                         || last_name
                         || ' Email: '
                         || email
                         || ' Phone number: '
                         || phone_number
                         || 'Hiredate: '
                         || hire_date
                   END
                      str
              FROM employees e -- WHERE department_id != 50 OR department_id IS NULL
                              )
  GROUP BY department_id
  /
  DEPARTMENT_ID EMPLOYEE
  ------------- -------------------------
             10 Employee_ID: 200 Nam ...
             20 Employee_ID: 201 Nam ...
             30 Employee_ID: 114 Nam ...
             40 Employee_ID: 203 Nam ...
             50 Too many employees ...
             60 Employee_ID: 103 Nam ...
             70 Employee_ID: 204 Nam ...
             80 Too many employees ...
             90 Employee_ID: 100 Nam ...
            100 Employee_ID: 109 Nam ...
            110 Employee_ID: 205 Nam ...
                Employee_ID: 178 Nam ... 
  
  12 rows selected.
  

• Error: "could not solve [public class] to an implementation of the component.

  Here is another question from clueless newbie! :-(

  I define a public class 'DynamicTextArea' at the top of the file and get the error message from the compiler "Could not resolve < DynamicTextArea > to a component implementation" at the bottom of the same file.

  Obviously, I don't understand something very basic.

  (The code between the asterisks commenrted was initially in a separate file, which I could not mxmlc or FlexBuilder to find, if rather than fight that question now, I moved it to the same file.)

  Here is the file:

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "
  >
  <!--****************************************************************-->
  < mx:Script >
  <! [CDATA]
  import flash.events.Event;
  Import mx.controls.TextArea;
  
  SerializableAttribute public class DynamicTextArea extends TextArea {}
  public void DynamicTextArea() {}
  Super();
  super.horizontalScrollPolicy = 'off ';
  super.verticalScrollPolicy = 'off ';
  this.addEventListener (Event.CHANGE, adjustHeightHandler);
  }
  private void adjustHeightHandler(event:Event):void {}
  trace ("textField.getLineMetrics (0) .height:" + textField.getLineMetrics (0) .height);
  If (height < = textField.textHeight + textField.getLineMetrics (0) .height) {}
  height = textField.textHeight;
  validateNow();
  }
  }
  override public function set text(val:String):void {}
  textField.text = val;
  validateNow();
  height = textField.textHeight;
  validateNow();
  }
  override public function set htmlText(val:String):void {}
  textField.htmlText = val;
  validateNow();
  height = textField.textHeight;
  validateNow();
  }
  override public function set height(value:Number):void {}
  if(TextField == null) {}
  If (height < = value) {}
  Super.Height = value;
  }
  } else {}
  var currentHeight:uint = textField.textHeight + textField.getLineMetrics (0) .height;
  If (currentHeight < = super.maxHeight) {}
  If (textField.textHeight! = textField.getLineMetrics (0) .height) {}
  Super.Height = currentHeight;
  }
  } else {}
  Super.Height = super.maxHeight;
  }
  }
  }
  override public function get text (): String {}
  return textField.text;
  }
  override public function get htmlText (): String {}
  return textField.htmlText;
  }
  
  override public function set maxHeight(value:Number):void {}
  super.maxHeight = value;
  }
  }
  []] >
  < / mx:Script >
  <!--****************************************************************-->
  < mx:Script >
  <! [CDATA]
  Import mx.controls.Alert;
  
  private var str:String = "this text will be long enough to trigger +.
  "the text box to increase his height.";
  private var htmlStr:String = ' will this < b > text < /b > < font color = "#00FF00" > long enough < / font > to trigger "+»
  "the text box to increase his height.";
  private function setLargeText (): void {}
  txt1. Text = str;
  txt2. Text = str;
  txt3. Text = str;
  Txt4.text = str;
  txt5.htmlText = htmlStr;
  txt6.htmlText = htmlStr;
  txt7.htmlText = htmlStr;
  txt8.htmlText = htmlStr;
  }
  []] >
  < / mx:Script >
  < DynamicTextArea id = "txt1" width = "300" height = "14" / >
  < DynamicTextArea id = "txt2" width = "300" height = "20" / >
  < DynamicTextArea id = "txt3" width = "300" height = "28" / >
  < DynamicTextArea id = "txt4" width = "300" height = "50" / >
  < DynamicTextArea id = "txt5" width = "300" height = "14" / >
  < DynamicTextArea id = "txt6" width = "300" height = "20" / >
  < DynamicTextArea id = "txt7" width = "300" height = "28" / >
  < DynamicTextArea id = "txt8" width = "300" height = "50" / >
  < mx:Button label = "text large Set" click = "setLargeText (); "/ >
  < / mx:Application >

  Thanks for any idea that you can provide!

  Harvey

  Harvey

  import DynamicTextArea.as
  

  In this case you do not add the .as, remove. The alert starts with a mx because it is the main folder where Flex all classes only go, you should not worry about that now.

  This

  xmlns:DTA="DynamicTextArea.*"
  

  In this case, DynamicTextArea will be a folder, and inside that folder will be your class, if you have your custom class in the same folder that you have your app aKa the default package, you only need to set like this

  xmlns:DTA="*"
  

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• How much time does it take for validation in 2 steps activate once implemented?

  I finished 2 steps to verify Setup, has been reduced to the "Manage your account" page on the site appleid and saw that my secure devices are not listed. Then I typed the button 'Edit' for this article and was released. When I joined, it seemed 2-step audit is more has been implemented, so I set up a second time, receives a different recovery code. Not really thinking, I typed in "Edit" and was even once disconnected.

  Signature, looks like 2 step verification has been cleared again. I try again or should I just take awhile 2 step check to activate after installing?

  I have no idea of what the community of this post to do so please forgive me if I posted in the wrong place.

  Are you following the steps described here.

  https://www.CNET.com/how-to/how-to-set-up-two-step-verification-for-your-Apple-i d.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Technical data has shown that he can do, but in fact can not?

  It is not good advertising. During the race I'm not for the convenience of drag any function. It is wet.

  This link should help you your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Can someone help me to implement my Add-ons to minimise blockages, suspended and the freezing of web pages?

  Here is a screenshot of my computer properties. I know that my PC is old. I confess, that I should know more about this kind of things I do, but I am so frustrated, I'm ready to everything simply uninstall Firefox and come back to Chrome. Basically, I don't do online, read the news, Sports, and play a few games. I can't help but feel that I have conflicting modules causing me all these questions, but for the life of me, I can't understand the right combination of them to get my browser to work correctly.

  Constantly Debugging Script box appears, or Shockwave breaks down or the page I simply implemented site, suspended and freezing. I wouldn't need to be clear my history/cache every day, but I do, and this is only a temporary solution. After half an hour, I'm again right back to all questions. Thanks in advance!

  The report of incidents reported these programs;

  Signature block

  Process Type plugin Shockwave Flash Version: 19.0.0.226

  Check this box:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• On my iPhone, my photo library is taking 8 GB, but I deleted everything to implement and it is not the flow of shared photos. I don't know how to get rid of this storage

  On my iPhone, the library takes up 8GB, but I deleted everything to implement and my shared photo stream takes up no storage

  See this: why my iOS device say I more pictures I can find?

• Is it possible to implement a silent mode for working days and weekends please

  Dear Development Department

  It would be so useful that you could implement a silent mode (the Moon) you can preset for the day's work (example 7:00 - 23:00) and weekends (example 10:00 - 0:00). Instead of the defined once available in the current ios.

  Thank you

  Nathalie Rijnvos

  Hi Nathalie

  You can submit your feature request to Apple here:

  https://www.Apple.com/feedback/iPhone.html

  (You do not speak to Apple here - it is a community based on the user).

• Firefox for Android does not implement HW keyboard shortcuts, please add the same as the desktop version!

  Hello
  I use a bluetooth keyboard and noticed that the classic keyboard shortcuts do not work with Firefox for Android. This is a major gap, with chrome, you can use the same shortcuts on the desktop version, it would be nice to have a comparable feature on Firefox for Android too.

  Hardware keyboards are a useful supplement to the tablets and the last iterations of keyboard 'sexy' as one that is available for the Google Nexus 9 are practical and folio desiderable.
  Please add this improvement soon!

  Thank you!

  Hello, this is a mainly managed by the community support forum is probably not the right place for the characteristics of the request (we are unable to implement all the features & devs read here).
  Please use https://input.mozilla.org/feedback for either your reactions or if you think that it is a missing feature in the browser file a bug at bugzilla.mozilla.org.

• How to make the address bar behaving like search bar? I mean SMART search, as it implemented in Chrome (very comfortable for users).

  For example when I type a word in the search bar, it begins to give search engine suggestions, so don't HAVE TO TYPE THE ENTIRE SEARCH PHRASE!
  The same behavior is in the address bar of Google Chrome. So in Chrome address bar and search bar are combined into one that is very comfortable for users.
  In Firefox, you have here two different bars, which makes no sense. I used Chrome before and usually by type of force of habit in the address bar to search for something and have to type the whole expression there to begin the search. It is very stupid and using the address bar to the fruitless search.
  Screenshots attached.
  So, do we not have any add-on or option to merge or combine the bars or to implement smart search in the address bar?
  Thank you.

  You can look at extensions such as these:

  • Foobar: https://addons.mozilla.org/firefox/addon/foobar/
  • Omnibar: https://addons.mozilla.org/firefox/addon/omnibar/