Implementation of new modules in R12.1.3

Similar Questions

• Where is the news module (or one of the modules "specialized")?

  I looked in the tab to the point and none of the "modules" are listed/available.

  You have to pay for a hosting upgraded via Adobe platform to see the module news, blog module, media download... etc in BC Developer ToolBox Modules menu?  I have added a news module before (before the implementation of the develop tab) and do not remember have to pay for accommodation in order to have access to and develop business w / modules BC.  This change?

  Those are the only options of Module is displayed for my site...

  

  I currently use Muse to the design part and would like to insert a few BC modules.

  Thank you...

  Stephen.

  You are not on a plan that support, you must upgrade to a higher plane.

• How to insert new Modules of RAM in Tecra M7

  Hello
  I use a Tecra M7 with 2 GB of RAM installed. Because of my work, I need more than that and bought 2 new Modules RAM 2 GB each.
  But trying to open the back of the M7 I have not found a place where I could access the old RAM Modules and replace. Does anyone have a Description or a photo where I open the M7 to replace RAM modules?

  Andreas

  I can give you a little tutorial how to change the modules:

  Remove the cover of the keyboard on the top of the keyboard (taking a screwdriver flat-blade and gently enter), then remove the 2 screws and remove the keyboard. You can disconnect the keyboard by releasing little support on the keyboard port. But BE GENTLY, brokes stuff too fast. ;)

  Then remove the cover of the memory (only 2 screws :) between you and the memory locations) and replace the modules. After exchanging just do the same as I've described, but backwards. : D

  Good luck

• When implementing my new iPhone, I logged into my old iCloud instead of choosing "set up as new iPhone" is there a way I can do this again? All my news from icloud is on my phone. All applications that I never downloaded and every pic ive taken. I don't w

  When implementing my new iPhone, I logged into my old iCloud instead of choosing "set up as new iPhone" is there a way I can do this again? All my news from iCloud is on my phone. All applications that I never downloaded all the photos I've ever taken since 2005 and I want to restart without remove ALL account iCloud himself. I always want to do a backup, I don't want it on my phone. I want to start fresh on my phone, but I tried to reset my phone under settings. I have just reset settings that did not 'you can't cancel it "because I don't want to lose all the photos I've ever taken." I always want to iCloud saving it just in case I need it someday, but I don't want any of this on my phone. I tried all means of security who do not say "you can't cancel" I still images and apps on my phone.

  Hello

  Turn off find my iPhone in settings then restore the iphone to factory settings.

  Now configure iphone as a new iPhone.

  See you soon

  Brian

• Satellite A100-828 - new module of memory does not

  Hello

  I recently bought 2x2gb modules for my A100-828. However, I can not any memory module to adapt to the second extension slot. I tried both the new modules in it that the old module of 512 MB which was originally in the laptop. The new memory is certainly compatible as two new modules work in the first expansion slot.

  Memory does not seem to fit properly in the second slot (I put in a good sense ad. it won't push back.)

  Anyone have ideas, what is the problem?

  Thanks for your help.

  Hello

  I put t know why do not the module in the second slot.
  The two sites are completely identical and also support the same standard.

  I think you used it just not compatible modules, or you have tried inserting modules backwards
  AFAIK you need DDR2 667 MHz (* PC2-5300 *) module SODIMM 200 PIN.

  What module do you use?

• Why my Satellite does not detect a new module of memory?

  Hello

  Today, I installed a new memory module SDRAM 128 MB in my Satellite 1670. It is not a real module but on the package is the right code: PA3005U.
  After that I turned on the computer, it is not detected then I use still 32 MB of RAM.
  How can I solve this problem?

  Steef

  Hello

  The fact is that you use the right memory module. It is not easy to say why the new module is not recognized correctly. The slot is maybe defective. Try to remove 32 MB module and use any other location 1. (Unfortunately I put t know if this device has two or one single location for memory expansion).

• Satellite L300-229 - new module of memory is not recognized

  Satellite L300-229 - I just installed an extension of memory of 1 GB to add to the existing 1 GB.

  I used a 1 GB Crucial 200pin DDR2 SODIMM PC2 6400 CL6. For some reason, it will not recognize it and shows again that the 1 GB. I closed and installed in start mode according to manual and tried to reinstall.

  Any idea?

  Thank you

  Hello

  What happens if you only install the new module 1 GB RAM? Don't start the computer and if so how much RAM does show?

  Normally, the specifications of the new RAM module should work. I have a Satellite L300 too and I've updated it with the same RAM but Kingston. It works without any problem. :)

• Satellite L350 - BSOD with new modules of RAM

  Hi, I have a Toshiba Satellite L350, it helps to have a memory of 2 GB 2 x 1 GB (PC2 5300 s)
  Now I bought 2x2gb (PC2 5300 s) to get a 4 GB and installed them both, but when I turn on my laptop I get the BSOD with Driver_IRQL_Not_LEss_OR_EQUAL error with ataport.sys

  Address 814A2AE1
  81499000 base
  datestamp 49ee8a3a

  Running Windows 7
  The two 2 GB cards memory sticks works fine individually but

  Any help would be welcome. Thank you

  Hi mate,

  What new RAM modules that you have bought exactly? For the moment, I think that they are not compatible together and so the BSOD appears. I think you have to use other RAM modules if want 4 GB of RAM.

  Also if you run a memory diagnostic tool like Memtest86 doesn't it displays an error if you use the new modules?

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens.

  LAN and WLAN connections

  My old wired desktop xp died, it was the first computer on my home network. My friend just got a new office and gave me an old. I have a laptop which has windows 7 and is connected wireless. It is still plugged in and works fine.  How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens. When I go to internet connections, it shows that it is connected, but I can't seem to connect. Help, please!

  Hi ShannonStrong,

  ·         What exactly happens when you try to connect to the network?

  ·         You receive an error message or error code?

  You can follow the steps in the Microsoft Knowledge Base article mentioned below and check.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  You can also see this article:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Note: The article also applies to Windows XP

  Let us know if this information useful.

• New Module Tags reference

  Y at - it a reference page that shows what are the variables for the NEW modules? When I add sort = "datereverse", it does not affect any of the list.

  Thanks in advance.

  Mouma

  Hey, Montreal,.

  You use is not the official docs?

  The developer reference

  You can see that it is-sortType

• Add new languages in R12.1.3 Italy, Spain and Serbia

  Legends of dear,

  I hope that I can add the following languages

  1. the Italy

  2. the Spain

  3. the Serbia

  So I'll test it in our instance VISION. As referring to the following documents

  1. how to add a new language in R12 [Article ID 1511692.1]

  2 R12.1: Oracle Applications NLS Release Notes, version 12.1 (Doc ID 788053.1()

  3 asking the translation synchronization Patches (Doc ID 252422.1()

  Check the following things

  1. we need to add the instance version SERBIA should be 12.1.3.

  2. to support more than 1 language character set should be UTF8 as recommended by oracle. Select the value from nls_database_parameters where parameter = "NLS_CHARACTERSET"; -> AL32UTF8

  3 base language must be AMERICAN or U.S. Language_code SELECT | ',' FROM fnd_languages WHERE installed_flag IN ('B', 'I'); -> U.S.

  4 AD_PATCH_SET level - ran $AD_TOP/sql/adutconf.sql

  AD

  Shared

  12.0.0 R12. AD. B.3

  March 26, 2009

  I hope that the upgraded AD patch is ok that "R12.» AD. "A.1"

  Still to do:

  5. application of TSP to generate the manifest and download the TSP.

  6. apply Patch TSP

  There are other things to check as NLS or MLS?

  At my right understanding and am the rest of the sequence is good or bad? Please correct me if am wrong? Is there a step by step or sequential approach to follow?

  Thank you

  Knockaert

  karthiksingh_dba wrote:

  Wow Hussein,

  Thank you very much for your detailed response. I downloaded the manifest and TSP is downloading now, for ITALIAN.

  You are welcome!

  Q:

  1. we have many reports and custom, forms do we need to change it manually for each? Or how is it possible?

  Please see (NLS Frequently Asked Questions (Doc ID 399789.1)) - 21. How to customize the translation?

  Thank you

  Hussein

• Advice for the implementation of Test Modules (HRMS, AR, AP) in R12

  Hello
  
  I am pretty new to Oracle Financials and R12 recently installed on my linux machine to try and test. My question may sound silly in a lot but please bear with me. After Installation I could login with SYSADMIN account and I can see Oracle E Business Suite, Oracle Applications Home Page.
  
  On the left side, I see the following options.
  Application developer
  The application Diagnostics
  Audit Manager
  HTML of CRM Management
  HTML CRM Developer
  Integrated SOA gateway
  Preferences SSWA
  The system administration
  System administrator
  Users management
  The administration of the process Web applications
  Workflow user Web Applications
  
  Now my question is how can I go to the screens of HRMS or account receivables etc I can customize the module. For example, if I want to set the chart, form where I will start from the options listed above do mention not everything related to accounts or HR or inventory etc..
  
  Any help will be appreciated.
  Please note that I chose, so almost all the options during installation time I'm 100% sure that these modules must have been installed.
  
  Thank you in advance.

  On the left side, I see the following options.
  Application developer
  The application Diagnostics
  Audit Manager
  HTML of CRM Management
  HTML CRM Developer
  Integrated SOA gateway
  Preferences SSWA
  The system administration
  System administrator
  Users management
  The administration of the process Web applications
  Workflow user Web Applications

  Now my question is how can I go to the screens of HRMS or account receivables etc I can customize the module. For example, if I want to set the chart, form where I will start from the options listed above do mention not everything related to accounts or HR or inventory etc..

  Click on these responsibilities to see their screens. If you do not have the responsibility added to your account, go to (responsibility of the system administrator > Security > set), ask your username and add responsibility.

  Any help will be appreciated.
  Please note that I chose, so almost all the options during installation time I'm 100% sure that these modules must have been installed.

  Thank you in advance.

  You can find docs EBS R12 to http://docs.oracle.com/cd/E18727_01/index.htm

  Thank you
  Hussein

• Could not load application module in R12.2.4 when I changed the class files directory

  Hi all

  I was able to successfully deploy a page in R12.2.4 where my path of the class file was like xxx/oracle/apps/fndxxx/abcd/Server

  but now, the directory must be changed to xxx/oracle/PSA/xxfnd/abcd/server, so I'm updating all the files of AM, VO, CO to point to the new directory and compiled and FTP'd to JAVA_TOP

  Bounce is done, but still the page is trying to access the page of the old directory (xxx/oracle/apps/fndxxx/abcd/server)

  It is said: oracle.apps.fnd.framework.OAException: could not load application module xxx/oracle/apps/fndxxx/abcd/Server/xxxAM

  I checked the classpath and it points to JAVA_TOP, also verified the file permissions (777)

  What could be the problem, please let me know

  @AJ: Please help me... You are the fastest of all

  Thank you

  Valsaint

  Hi all

  It was the FORM function issue, where he wasn't pointing to the updated file directory structure

  Thank you

  Valsaint

• Download new modules that I appear on the Add-ons Manager, but not in the menu drop-down

  When I download a new add-on on the site add-on from Mozilla, the Add - it will appear in my Add-ons Manager, but I can't use, because it will not be displayed on my menu drop - even if the Add-ons Manager said that told Add-ons are enabled. How can I fix it? Also, I can download some add-ons that work very well when visiting sites like amazon or dictionary.com where their modules appear in the menu when you visit.

  Thank you.

  A search engine plugin.
  http://mycroftproject.com/search-engines.html?name=Google+images