Implementation of the Global Navigation in OBIEE

Similar Questions

• implementation of the global public key infrastructure service

  Hello world

  With clientless SSL VPN to support external clients we need to use the global PKI service?

  Concerning

  MAhesh

  It is recommended but not mandatory. As long as customers have trust the certificate of the SAA, it will work.

  With a global PKI that uses a public CA well known (such as Verisign, Thawte, Entrust, GoDaddy etc) to issue certificates to your ASA, almost every customer will have these predefined as CAs root of trust. In this case, they will not see any warning messages when browsing the ASA.

  If you use a self-signed certificate or internal PKI, your customers need either a. install the ASA or the internal PKI root certificate in their certificate root trust or b. store always accept the certificate not approved each time.

  Most people don't want to present their customers with one of the two the latter choice so the recommendation to use a public certification authority.

• Implementation of the writeback filters in OBIEE

  Hi people,
  
  My Client came with a condition in which the writeback has been applied in OBIEE 11 g reports. We have completed the writeback for the text boxes in which you can write and even is is inserted in the reports. Problem is that we want to insert the value of the filter selected in the database as well. For example if there are few options in a list drop-down filter and a user selects one of them. The value of this filter must be written in the comic book. Can someone help me on this please?
  
  Thank you very much appreciate!

  Hello

  Let me visualize what you say first.

  Guests
  Filter 1 Filter 2 3 filter 4

  Report

  Some of the columns column Writeback
  _____________

  And you want to update the values 1 filter, filter 2, 3 filter, filter 4 and TextBox value in your database, right?

  If this is the case, then simply add filter them the columns in your report. Your report will look like:

  Report

  Filter filter column 1 column 2 column 3 column 4 filter filter some writeback column column

  And then you can have the following update stmt in your xml to writeback:

  Update table set databasecolumn 1 = @1, 2 = @2 databasecolumn, databasecolumn 3 = @3, 4 = @4 databasecolumn, databasecolumn n = @n where ;

  Hope that clarifies what I'm trying to say.

  Thank you
  Gerard

  Published by: gauravnankar on April 2, 2013 21:06

  Published by: gauravnankar on April 2, 2013 21:07

• Two-way Navigation: side AND Top Navigation: Page header contained in the Global Page causes overlap of the following regions

  Environment:

  -------------------

  APEX 5.0.1 on ADR in Tomcat

  Universal theme

  Global page

  New application (no migration)

  The goal:

  -----------

  In addition to the navigation, I want to use a horizontal Navigation at the top of all application pages at the same time.

  My way up to now:

  ---------------------

  (1) left Navigation ist defined as default user interface.

  1A) Unfortunately it is not possible to have two means of navigation defined at the same time!

  (2) therefore... I created a global page

  (3) and added a list with the list of attribute (= Menu bar) template to the PAGE of a global Page header. -> Well, looks good, but:

  The problem and the Question:

  ------------------------------------

  When adding a list according to menu (or something else like static text) to the global header of the page then the left hand side Navigation AND Breadcrumb area is oberlapped by the 'Logo' and 'Navigation Bar area' because the Page header is pushing it down. Parts of the side Navigation and navigation bar are not more.

  Please see the 2 following screen captures:

  Initial position:

  

  After the addition of menu on the global page:

  

  Unfortunately I can't understand myself, how to set the position or the css page template, or values... and at what level (model, page,...) I have to put.

  = > y at - it a way to let these following regions (dynamically) be pushed down? How can we define the position?

  Best regards

  Joerg

  Hello out there!

  In case anyone has the same issue here the answer I would give for-> me I found the following solution:

  .) I defined a new style with the following custom css theme roller:

  .apex-side-nav .t-body-nav, nav-side-.apex .t-body-stocks, .apex-side-nav .t-body-title

  {

  top: 80px;

  }

  

  .) And then of course saved as a new style.

  Hope this is the right way and good / best practices to deal with it!

  Best regards!

  Joerg

• Understand the global optimization VI

  Hello

  I have a task that requires the use of potimization overall, however, I'm not really familiar with it. I tried to look at the example of VI, however I have a hard time understaniding where my data would go.

  My current task includes measuring the mechanical impedance (such as a spectrum of complex numbers) and adjusting a model of 4 parameters with the GOP on this issue, find the best values. (This is how it has been described by previous to work best, so I am trying to implement this way). The result of this process would be to minimize the difference between the measured impedance and the model mounted on it.

  Our research group is using a program with an implementation of the work for this, but we want to implement this model Assembly in Labview.

  The impedance data is a complex number, so it has real and imaginary, parts with some parameters of the model being determinde by real and imaginary data part.

  I tried to use a 'simple' Lev - Mar hold on my data as a first try by changing the screw of this topic (using cast to enter complex data of the vi of Lev - Mar), but there only values similar to my desired adjustment (made with the existing program) if I put the very close estimate of the values that I receive in my program. That's why I wanted to move to global optimization, labview for finding these estimate values within certain limits.

  And that's where I'm stuck:

  I have a complex impedance (so real and imaginary parts for frequency points) and an equation that is supposed to give the output. If I take the example of 'Two circles Optimization' for example vi, where should I post my spectrum of impedance for the VI to analyze? As the Lev - Mar had clear entered for my data (like X and Y), I knew where over my data, but with global optimization I don't know, where the son.

  I feel that I should use a VI for the objective function to manage the complex of entry as well.

  The objective function for optimization should be the average of "[Z (omega) - Zfit (omega)] /Z (omega)" for each frequency points, with Z being measured and Zfit being the impedance with the estimation of parameters. Zfit = A + j * Omega * B + (C - j * D) / (Omega ^ [(2/pi) * arctan(C/D)] (j is the imaginary unit))

  So where should I put my impdance data in the example vi to be used by the function of parameter?

  Thank you very much, I hope that my explanation is more or less clear

  A few suggestions. In your cost functions, use a Subvi to encapsulate the actual distance function.  For example, a VI that has A, B, C, D, Z] and [w] as inputs and output distance.  Then the same Subvi common can call the cost for each type of optimization function. If possible, structure things so that your graphics code uses the same screws as your optimization code.

  In your graphics, the 'Original' and 'MyProgram' curves seem to be closer than the rest, but when I entered "MyProgram" settings in one of the cost functions, the output of function is ~ 0.16, which is bigger than all the results of the optimization.  It seems that there is a gap between the graph and the cost function, if I interpret it correctly.  This may mean that the cost function is not quite what you wanted.

  I suspect optimization features converge not well, at least for the algoritm unconstrained.  Maybe it's why you get the error armijo.  The more robust algorithm without constraint is the Nelder-Mead simplex algorithm, so try one until you are sure things are working well, then move on better/more rapid convergence.

  -Jim

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• Confirming a design where I need to save where the user navigated to the screen.

  A matter of design, which is a good implementation of the following?

  I need to be able to save the location of the place where the user has scrolled, then when the user:

  1. Changing screens and returns to the previous screen.
  2. The application farm (moves the application at bottom) and opens the app again (move the app in the foreground).

  The user scrolls automatically here where the user was before.

  For example, if I have a VerticalFieldManager with the following text read only fields:

  • LabelField
  • LabelField
  • LabelField
  • LabelField
  • LabelField
  • ButtonField

  The user scroll down to the third LabelField — two actions user above performs, returns to the screen, and scrolls down to the third TextField again.

  Is the hardest part, I can't count on own dirty, muddy, or fields because it is read only the data and a ButtonField.

  I can't use Manager.setFocus because the fields have an accent.

  I think I can use Manager.setHorizontalScroll and Manager.getHorizontalScroll, but is there a better way?

  Not sure that your arguments to change my suggestion.

  "The user must be able to close the application."

  If they close the applciation that they lose their position.  It happens in most of the applications.  Browsers do not open up on top of the page you were viewing when you close, for example.

  "The user must be able to request the application thoroughly using the end key of red color"

  You will not be able to stop this.  It will just happen.  Nothing for you to do.

  "This is a pile of high display a screen where the Menu button is the main navigation.".

  This does not preclude that I proposed either possible.  If you pop a screen and then later push it, my understanding (and experience) are that he's going to be redisplayed as it was when you jump it.  The screens are objects, they don't stop screens just because they aren't on the stack of the screen.

  Also, I see no problem in what you descrtibed for a touchscreen device.

• picture change the white balance that has been implemented in the device after its import in lightroom 5

  My pictures change the balance of whites and the global settings that have been implemented in the unit after its import in lightroom 5. Met someone with something like that? Thanks to you all.

  Alex

  Screen 1 - this is what it looks like right after the import. The white balance is correct and just need a few changes.
  

  

  
  

  Screen 2 - However, In a few seconds it turns into this by itself. This can also happen when editing is finished, if I remove the image in Lightroom.
  

  

  Screen 3 - in order to restore it to a certain extent I have to select the predefined filter called 'Zero '.

  

  That means that you have inadvertently applied a preset import to have checked in the preferences of your Auto adjustments:

  

• Preset point anchor and exposed position when inserting in the [global] model

  Where do I'll change the global preferences to predefine the measurement & 0,0 0,0 & anchor when you insert anything in the model.

  Help, please!

  Make an animation preset with the anchor attached to 0,0, select all your images in a model and click...

  The problem is that anchors sequences and model centers have always been implemented this way in AE and there is no way to change the anchor Point in the project Panel.

  Mylenium suggested, write a script and that allows you to import your images instead of import using the file > import.

• Global Navigation rules

  Hi all
  
  I use Jdev 11 g ADF RC.
  
  I want to apply the rules of global navigation, I defined some rules of navigation in adfc-config .xml, as follows:
  
  < id view = "pro000100" >
  /pro00/pro000100/pro000100.jspx < page > < / print this page >
  < / view >
  < id view = "pro000200" >
  /pro00/pro000200/pro000200.jspx < page > < / print this page >
  < / view >
  <-flow-control rule >
  < of-activity-id > * < /-activity-id >
  < control-flow-case >
  pro000200 < from outcome > < / de-results >
  pro000200 < to-activity-id > < / to-activity-id >
  < / control-flow-case >
  < control-flow-case >
  pro000100 < from outcome > < / de-results >
  pro000100 < to-activity-id > < / to-activity-id >
  < / control-flow-case >
  < / control-flow-rule >
  
  The pages pro000200 and pro000100, includes a region defined as taskflows bounded. If I put a commandButton control in one of the fragments page defined within the pro000200Flow and the action value = "pro000100", it does not navigate. How can I do?
  
  Concerning
  
  Joseba

  Hello
  This is an example:
  In your pageFragment:
  

  In your taskFlow:
  
  returnToAdfcConfig
  

  In your adfc-config:
  
  returnToAdfcConfig
  AnActivityId
  

  Concerning

  Clément

• Implementation of SSO with EBS R12, OBIEE

  Hello
  
  I have some doubts can you please delete it.
  
  We have installed EBS R12 and autonomous OBIEE (basic mode) on the same server (Linux).
  
  Now, we want to implement SSO between EBS R12 and OBIEE(basic mode).
  
  First question, it is mandatory to install OBIEE mode in advance to implement SSO? If no
  
  so, what will the steps to implement the same?
  
  We tried to implement, but when you click on link answers Oracel BI in EBS R12 application that we have moved to OBIEE answers page but it still shows that "you are already connected...". »
  
  Any help will be much appreciated.
  
  Kind regards
  
  Norman John

  Can you check the log file Presentation Services and NQquery.log? Can you confirm what type of method you use to pass the ID of the user and configuration of your application server?

• How can I select 'search yandex' as a default search in the night Navigator engine 44.0a1 x 64

  How can I select 'search yandex' as a default search in the night Navigator engine 44.0a1 x 64?

  Now, I see a lot of search engines but did not have "yandex".

  And how do I install elements of Yandex, when this may be available?

  If you are not able to install a search plugin for Yandex from the modules or Mycroft site, you can try to install one on the site (this works in Firefox 41, I have not tested in every night):

  Visit https://www.yandex.ru/ and notice that there is a green circle with a + on it on the search bar of Firefox. Click on that and then find the line on the menu drop down to add the site as a search engine.

  I have attached a screenshot, but since I can't actually read the language, I apologize if it's totally another thing.

  To make Yandex your default, you can use the link at the bottom of the Panel to the Options page search section.

  Success?

  Regarding Yandex elements, is the problem that Yandex has not presented the extension to be signed by the team of Add-ons? It's something that you might feel free to encourage them to do.

• Problems with the keyboard navigation

  I try to use the caret browsing most of the time or all the time, but I have several questions. (So please don't tell me how to disable the keyboard navigation). Also, I would like to use the keyboard navigation without also having to use the mouse - I need now for most to overcome what I think is problems.

  The problems are:

  (1) switching to a page where already in accent circumflex mode requires using the mouse to move the focus somewhere before the caret navigation is logical. I tried the wrapper work using the search text or tab, but it's the two unrelible and against nature (even tedious).

  (2) while in insert mode I sometimes loose site of the cursor. I can continue to use the arrows until starts it page scroll which tells that the caret is on the top edge or lower, but I still don't see it.

  (3) while scrolling with arrows, cursor/caret hits a link or a title then re-use of the fl arrows increment lines at this level "indentation", without going through whole paragraphs of text. I need to use the mouse to reset the caret a text box.

  (4) I think it's the same problem as above, but I enter a mode where the up and down arrows take me to top/bottom of the page rather than up/down line as it should.

  (5) the cursor becomes more a region on the side of the page (such as a navigation bar), and there seems to be no way the mouse-less to get the cursor to the text box.

  (6) it seems (but I'm not positive of what really happens) after scrolling to the bottom of the page not in insert mode, I switch to insert mode and start using the arrows but caret navigation starts from where the focus was before--as forwards several page scrolls with the space bar.

  In summary, what I expected to happen is:

  (a) I navigate to a new page in insert mode and have somewhere logical automatically set focus as in the center of the current view.

  (b) set the mode insertion while on a page - automatically have focus on the Center or other places of logic in the current view.

  (c) never increment by something other than a line upwards or downwards. Especially, do not go to navigation link or next paragraph - what ever he is doing.

  I use Firefox 24.0 on XP and have the same problems in Mode without failure.

  This is a bug.

  Firefox Bugzilla entry here.

• Satellite Pro U200 with Vista: ConfigFree can't see implementation of the SUMMIT

  I can't see the implementation of the SUMMIT to configfree.

  Please let me know

  Sorry Ronen, but I really don't understand what you mean exactly below the SUMMIT. ConfigFree is well known to me, but now I'm really confused.
  In my case, it works fine. I can watch and see all networks; LAN and WLan...

• How to get the value of the global variable to test in the user interface of labview?

  Hello.

  Can someone please share examples and tell me how access the global variable to test using the interface labview user.

  I found some references and obtained from the method.

  I sent the link below

  https://decibel.NI.com/content/docs/doc-5501