Implementation of Web services in Flash CS5

Similar Questions

• Implementation of Web Services

  I found a video which is very informative that I wanted to share with the community. He has been out for some time, but did not have many points of view if I am I'll post them here so that he can get the best exposure.

  It provides and introduction to web services and shows an activation procedure that have and then goes on to explain what ePrint is, how it works and what type of documents can be sent using ePrint.

  I hope the community finds this useful and informative!  Good impression!

• OfficeJet 5740 e-all-in-one: the printer display shows 'downloading' message despite no web service implemented

  I got a new Officejet 5740 e-all-in-one and put in place a few days ago. It is implemented in a router which is also a modem.  I've implemented any web service.  My network is password protected, and I'm the only one on this subject.

  A couple of times I arrived in front of the printer and there was a screen that says that there is a current download, and he showed the percent completed. This surprised me because I have not implemented in web services for the printer.

  I cancelled the download, both times.  The second time I accidentally typed the screen again.  I don't know what button I hit, but it has printed a message that says that my printer is now web enabled.  He also says that my printer has an email address.

  I went into the web installer, and it seemed to me that I had not implemented the web.

  1. what could it possibly download?

  2. If it does not complete a download while I'm not looking for, will there be a record of this?

  Hi @Andrew111,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a 5740 Officejet from HP printer e-all-in-one with a computer of Windows 7 and you noticed that the screen of the printer said there was a current download, which you surprised because you but you did not set up web services. I would like to help with that.

  You mentioned that the printer has its own e-mail address. Web services have been enabled for the printer to have an address of mail @hpeprint.com. It is possible to disable the ePrint and printable HP once the HP Web Services has been enabled.

  The download that was underway was probably a printer update, which will come by automatically. Nothing to do with the computer. I don't think there is a record of updates of the printer anywhere.

  Please let me know if that answers your question...

• Does support Flash Web services hosted on https?

  Hello..
  I am new to web services using flash.
  I need to consume web services hosted on https://webservices.netsuite.com/wsdl/v2008_2_0/netsuite.wsdl
  When I add this URL in the Control Panel window-others-WebServices, it throws the error
  Please enter a valid: URL / / WSDL...
  I'm using flash professional 8.
  Other http WSDL files works fine...
  Does flash support https?
  guide me to the rest...
  Thanks and greetings
  Ravi
  

  Delighted, he must consult with this Web hosting company. I visited your site and it contains style information. You must also check the code with http://, either it works with it or not.

• Sent using the Web service object is null

  I have a running in JBoss Web service. He's just a "getperson" and "addperson" methods getPerson takes an integer and returns a Person (java) object. My flex code is fine with that. Then when I try to call the method "addPerson" webservice (from flex) the Java code that is called seems to be only partially filled. For example:
  
  Flex:
  var p: Object = new Object();
  p.firstName = textFirst.text;
  p.lastName = textLast.text;
  
  var ws: WebService = new WebService();
  WS.wsdl = " http://localhost: 8080/MyWebProject/person?" WSDL";
  ws.addPerson.addEventListener ("result", handleResult_addPerson);
  ws.addEventListener (FaultEvent.FAULT, handleFault);
  ws.loadWSDL ();
  ws.addPerson (p);
  
  Tell the textFirst and the textLast have "Bill" and "Gates".
  
  Java:
  the implementation of web service method
  public int addPerson (person) {}
  System.out.println ("person added:" + person);
  If (person! = null) {}
  System.out.println ("first:" + person.getFirstName ());
  System.out.println ("last:" + person.getLastName ());
  }
  }
  
  In the JBoss console output when "addPerson" is invoked is:
  Person: Person@40280923 (something like that)
  first: Bill
  last: null
  
  Any ideas why?

  too bad, I guess. It seems that Apache CXF (the thing I used to create my webservice) servlet Gets the SOAP message with all the values that I expected. Must be a problem on the side of CXF (server) of things.

• [SOLVED] - how to invoke Web service through backing bean

  Hi all
  
  I'm new to the web service. I need to implement a web service in my application.
  
  I already posted my request in the forum
  
  [SOLVED] - how to invoke Web service through backing bean
  
  [SOLVED] New Web Services - need your help
  
  Please someone knows the solution means the poster.
  
  
  Thanks and greetings
  VB
  
  Published by: malek Balan on June 17, 2009 01:28

  Large. Yes, take the code of the main as entry point method, IE

  QuoteServiceSoapHttpPortClient myPort = new QuoteServiceSoapHttpPortClient();
  myPort.myMethod ();

  Be sure to include the customer file in your binaries.
  -olaf

  PS: Please rate the answer.

• The IOM Web services URL

  We try to implement SPML Web services in IOM. We have deployed web services connector in Jboss AS and then ran the batch file, which shows the accumulation of success.
  
  Now I have problems finding the default URL for web services (for IOM). Is it located in a file/location in the Home Directory of the IOM, or do we need to register an SPML Service via the Service Manager web oracle to obtain the URL?
  
  
  Thank you

  The section in the doc you are quoting refers to integration with Oracle Web Services Manager (WSM) which is another product. If you deploy SPML web service to the application server (and not WSM), then you must read the deployment with... article 12.3, where it has information on each application server. Endpoint URL of a deployed service are:

  WebLogic: / spmlws/OIMProvisioning
  JBoss: / spmlws/services/HttpSoap11
  OC4J, WebSphere: / spmlws/HttpSoap11

  Once you have deployed the web service of SPML, run the client example, you get even the source code so you can see exactly what is happening. If you want to generate a WSDL from Java classes using the web services toolkit, there is nothing preventing you to do this, just take a WSDL for the right application server.

• Implementation of the Web Service on Blackberry

  Hello

  I am new to web services so now I want to know how you can hit the web services via the blackberry app?

  Y at - there no web service sample I can use to test the object.

  In fact, I want to know the implementation of the web service on blackberry.

  Please provice me useful links and resources.

  What is KSOAP2 in blackberry?

  I think there are 2 ways to use web services

  1 http

  2 SOAP

  I want to know the two tests.

  Please help me.

  Sorry for non trivial stuff like this there is nothing like "sample code" of my side - I work in a business environment, not as a developer open source.

• The implementation of RunProgramInGuest of VIX using the vSphere Web Services SDK?

  Hello

  A few months ago I developed a python API for VIX, but as I needed to extend the functionality of this API (performance monitoring, host management, etc.) I moved the vSphere Web Services SDK.

  However, I did find a way to implement some comments VIX as LoginInGuest or RunProgramInGuest functions using only the Web Services SDK.

  Is there a way to do this? I thought that each function VIX has been translated internally to a soap request, but now I think that is not the case for these functions of comments, if so, how VIX inwardly does them?

  Thanks for your help!

  Sebastian Tello

  Currently, if you must implement specific comments operations running a specific script/application or by connecting to a guest, you must use the VIX API. This feature is not currently exposed in the vSphere API, you will need to use a combination of both, until VMware them integrates in the vSphere API core. For more details on the future of VIX, take a look at this blog post - http://www.virtuallyghetto.com/2010/11/what-is-vmware-vix-api-and-its-future.html

• (number of flash builder) Web service method binding

  I have a new Flash Builder project (Flex), there essentially combo in it 2 boxes. I have added a web service, the service is called uws_lookups and has 2 methods, lookupLanguage and lookupCountry.

  If I bind a combobox control to the result of one of these services, that everything works as expected, here is the code:

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx"
        xmlns:uws_lookups="services.uws_lookups.*"
        minWidth="955" minHeight="600">
   <fx:Script>
    <![CDATA[
     import com.adobe.serializers.utility.TypeUtility;
  
     import mx.controls.Alert;
     import mx.events.FlexEvent;
  
     protected function comboBox_creationCompleteHandler(event:FlexEvent):void
     {
      lookupCountryResult.token = uws_lookups.lookupCountry();
     }
    ]]>
   </fx:Script>
   <fx:Declarations>
    <s:CallResponder id="lookupCountryResult"/>
    <uws_lookups:Uws_lookups id="uws_lookups"
           fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
           showBusyCursor="true"/>
    <!-- Place non-visual elements (e.g., services, value objects) here -->
   </fx:Declarations>
   <s:ComboBox id="comboBox" creationComplete="comboBox_creationCompleteHandler(event)" labelField="countryName">
    <s:AsyncListView list="{TypeUtility.convertToCollection(lookupCountryResult.lastResult.Tables.Country.Rows)}"/>
   </s:ComboBox>
   <s:ComboBox/>
  </s:Application>
  

  As you can see the combobox control is bound, the results are returned and displayed, however when I link the second box to the other method Flash Builder is the most stupid thing ever:

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx"
        xmlns:uws_lookups="services.uws_lookups.*"
        minWidth="955" minHeight="600">
   <fx:Script>
    <![CDATA[
     import com.adobe.serializers.utility.TypeUtility;
     
     import mx.controls.Alert;
     import mx.events.FlexEvent;
     
     protected function comboBox_creationCompleteHandler(event:FlexEvent):void
     {
      lookupCountryResult.token = uws_lookups.lookupCountry();
     }
     
     protected function comboBox2_creationCompleteHandler(event:FlexEvent):void
     {
      lookupLanguageResult.token = uws_lookups.lookupLanguage();
     }
     
    ]]>
   </fx:Script>
   <fx:Declarations>
    <s:CallResponder id="lookupCountryResult"/> 
    <s:CallResponder id="lookupLanguageResult"/>
  
    <uws_lookups:Uws_lookups id="uws_lookups" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
    <!-- Place non-visual elements (e.g., services, value objects) here -->
   </fx:Declarations>
  
   <s:ComboBox id="comboBox" creationComplete="comboBox_creationCompleteHandler(event)" labelField="countryName">
    <s:AsyncListView list="{TypeUtility.convertToCollection(lookupCountryResult.lastResult.Tables.Country.Rows)}"/>
   </s:ComboBox>
  
   <s:ComboBox id="comboBox2" creationComplete="comboBox2_creationCompleteHandler(event)" labelField="LanguageName">
    <s:AsyncListView list="{TypeUtility.convertToCollection(lookupLanguageResult.lastResult.Tables.Country.Rows)}"/>
   </s:ComboBox>
  
  </s:Application>
  

  Now, I'm sure that's not what I asked it to do, so I manually change the line of code to read correctly

  < s:AsyncListView list = "{TypeUtility.convertToCollection (lookupLanguageResult.lastResult.Tables.Language.Ro ws)}" / >

  Which allows the second combobox to work, but the original one (country) now displays [object: Language_type]

  I debug the application and both methods actually return the correct data, FB is just choosing to do something stupid when I add the second call.

  I've done the basics, deleted the project and has restarted, tried a different web service, tried different methods, but it seems that when I use several methods it fails, then please tell me, what I'm doing wrong because I know that Flash Builder cannot do this by its design.

  I'll post the response from the service in another post.

  Thanks for any help you have!

  Shaine

  It seems that the idea was in the code that you could not see. When you auto detects the type of back, all research methods * return as tables.table. _type.value, so when I add the second method to search for the second part for some reason any Flash Builder must code in classes _super_*.as, the Table.as and the Tables.as.

  Rename the Tables and the Table returns solves the problem and it works exactly as expected.

  I know I will regret it in a minute, but who put tips in the help files, or on the KB was a * really * useful thing to Adobe, I love your products, I love the samples and demos, but your doco sucks (sorry but this is the case).

  My apologies for the ranting, problem solved, strategy myself some points.

  Concerning

  Shaine

• I designed a website in Flash CS5 and the .swf file is not displayed on the web!

  OK, I'm very new to Dreamweaver CS5, I created a website in Flash CS5 (it is a model of "coming soon").  I got all transferred in Dreamweaver CS5.  However, when I saw in the browser it works fine, but when it is transferred to my server I see nothing other than the index with the .sfw in her file files.  When I click on it, my coming soon design show! I added an index.html file, but when I do this I get a blank screen.  I tried a file index.swf without success.  How can I get this for a glimpse on the web without displaying the index? I changed the permissions of 644 to 755, still nada. Here is my site www.dallasxplosion.net.  You gurus can help me with this minor problem?

  Hello

  Please try it out.

  Simply save this file "dallasxplosiontvcs.html" under the name "index.html", so your "dallasxplosiontvcs.html" remains in your directory, load the file 'index.html' on your server. Watch Hat happens, I'm sure you will be fine.

  Hans G.

• Import a Lightroom 3 Flash Web slide show Flash Professional CS5

  Hello

  I am a photographer to build a site in flash for my clients, and I'm all done, except add a slide show on my page "Gallery". In 'Lightroom 3.2 RC', I built a custom «Flash Web, controllable slide show» How to import in my project "Flash Professional CS5?

  Thanks in advance.

  PS I tried to export the slideshow of "Lightroom 3.2 RC" and then import in "Flash Professional CS5." But whenever I do that, it only allows me to import pieces of it at a time. For example... When I go in the import menu in 'Flash CS5 of Profession', I am able to access the folder, but forces me to view the contents of it. For this reason, "Flash Professional CS5" only allow me to put in some records at a time, as thumbnails, then the medium-sized images, then the large images etc...

  Also when I discovered the file, even with a keyboard command (I'm on a Mac then command-A) will select all content. It makes me go to the folder, and then for the images, then I'm able to import these specific stand-alone images.

  In addition, "Flash CS5 of Profession" doesn't let me import specific functions, such as the java script files and index.

  If your slideshow is a swf file, you cannot import it.  you load by using the loader class.

  for example, if you swf is named ss.swf, you would use something like:

  var ldr:Loader = new Loader();

  addChild (ldr);

  LDR. Load (new URLRequest ("ss.swf"));

• air application connects to the web service although swf don't

  Hey there,

  I will try and be brief. We built a kiosk application in flash builder a pure as3 project. When we went to convert it into an air application all seems fine except for two issues. one is that we cannot use the Security.allowDomain("*"); Tagus. not much we comment on this possibility, but when we do we cannot connect to the web service that we use. Here is the error msg that we get:

  URL http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid = 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  ioErrorHandler: errorProductId: WebApplicationException

  ioErrorHandler: currentTarget: Error #2032: error in workflow. URL: http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid =. 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  Here is the error of charles:

  < error >

  < > 103 errorCode < / errorCode >

  types of arguments < message > Incorrect or combination < / message >

  < errorDetail > WebApplicationException() < / errorDetail >

  false < success > < / success >

  < / error >

  now, if we run just the swf file it connects very well. the only reason I need this app to be in a wrapper of the air is so that I can remove the print dialog box. otherwise, I'd create just an exe file.

  any ideas would be great!

  Thank you

  OK, found the problem!

  When we built the as3 project and we implement web service calls, we used post from get we caused problems. We have been connecting to a service of qa so that may have something to do with it. In all cases, we have changed the headers in the air application to get and it seems to work fine. Why would he works in the SWF and not the air who knows, but there are go!

  Thank you

  Jorge

• Can not get the web service works

  I get the following error message when you try to call ASP.NET web service on the same host.
  
  TypeError: Error #1034: has no Type constraint: cannot convert function-2010 in Namespace.
  to mx.rpc.wsdl::WSDL/::processNamespaces()
  to mx.rpc.wsdl::WSDL$iinit()
  to mx.rpc.wsdl::WSDLLoader/mx.rpc.wsdl:WSDLLoader::resultHandler()
  at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::resultHandler()
  at mx.rpc::Responder/result()
  at mx.rpc::AsyncRequest/acknowledge()
  to: DirectHTTPMessageResponder / completeHandler)
  at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/flash.net:URLLoader::onComplete()
  
  I use http://localhost/Hello/Service1.asmx?WSDL as the wsdl and it works when I browse it with the browser.
  
  Any help would be much appreciated.
  Thank you
  

  Got it... Finally!

  In my Tools.as file I had a static method named Split(Array,delimiter). I added this because I didn't like the stock of String.Split implementation... ie you get nothing if the delimiter is not found in the string, I wanted an array containing a single element in this document, the original string.

  in any case... There was a conflict of names with the Split method in the SDK because as soon as I changed the name of the method of SplitMeUp it worked and I got no longer error when loading of the WSDL.

• Tab HP Web services to find the claim code is not found

  Hello

  I'm trying to implement HP ePrint on my printer HP Laserjet M1522nf connected to my home network. I am unable to find the claim code for my printer set up the device connected HP services.

  I entered the IP address on my web browser and entered the Printer Setup tab, but I can't find the web services tab or the printing page of information for the claim code.

  Please let me know how to find the claim code so that I could set up ePrint.

  Thank you

  Harish

  OK done judt this device is not ready for eprint.

  Please ignore my previous post.