Import a CSV file into a table

Similar Questions

• import a csv file into AddressBook

  I'm migrating from outlook to Thunderbird. Import all the emails and addresses does not work. So I exported by e-mail addresses from my server to a csv file. I imported the csv file into Thunderbird. I have to OK the addresses import. Is it possible to import in one click

  If you export all your contacts in a single csv file, you should be able to import the file in a single step, although you may need to edit the csv file before you do:

  https://support.Mozilla.org/en-us/questions/1012084

• Import from CSV file into oracle using pl/sql - sql loader 3.1

  Hello
  
  I am trying to learn how to import a CSV file in an oracle table. I tried the import utility in SQL Loader, but it generates specific lines of code to import each line. I would like a loop to go through the CSV file stored on my local disk and transferred it to my table.
  
  I tried the following, but not luck
  DOWNLOAD THE DATA
  INFILE 'sample_csv.csv '.
  IN THE TEST TABLE
  FIELDS TERMINATED BY ', '.
  ;

  951716 wrote:
  Hello

  I am trying to learn how to import a CSV file in an oracle table. I tried the import utility in SQL Loader, but it generates specific lines of code to import each line. I would like a loop to go through the CSV file stored on my local disk and transferred it to my table.

  line-by-line is slow by slow.
  PL/SQL will be NEVER faster than simple SQL
  INSERT INTO MYTABLE SELECT * FROM EXTERNAL_TBL;

  http://www.orafaq.com/wiki/External_table

• Load a CSV file into a table like in dataworkshop

  Workshop of data has a function to load a CSV file and create a table based on it, the same, I want to create in my application.
  
  
  
  I went through the forum http://forums.oracle.com/forums/thread.jspa?threadID=334988 & start = 60 & tstart = 0
  
  but not able to download all the files (application, package HTMLDB_TOOLS and PAGE_SENTRY function) could not find the PAGE_SENTRY function.
  
  AND when I open this link http://apex.oracle.com/pls/apex/f?p=27746
  
  I could not run the application. I've provided a CSV file and when I click on SEND, I get the error:
  
  ORA-06550: line 1, column 7: PLS-00201: identifier ' HTMLDB_TOOLS. PARSE_FILE' must be declared
  
  tried in apex.oracle.com host as shown in the previous post.
  
  any help pls..,.
  
  Another method to load data into the tables..., (as dataworkshop)

  Hello

  I have check app works very well.

  Have you read instructions?
  Load a CSV file in a table
  >
  Create a small csv file as

  col1, col2, col3
  VARCHAR2 (10), Number, "Number (10.2)" "
  Cat, 2, 3.2
  dog, 99, 10.4
  >
  First row must have valid column names. To verify that your first line of titles have no spaces or those who are not words reserved.
  Second line of the CSV file must have column of table data types.

  When you meet these requirements app works perfectly

  Kind regards
  Jari

• Performance problem when downloading the CSV files into Oracle tables

  We have implemented the Vikas solution ([http://htmldb.oracle.com/pls/otn/f?p=38131:1]) to download CSV files into tables Oracle permanent and it works fine. However, whenever we try to send more than 5,000 records, it takes a lot of time and often wait times. What can we do to improve performance? We are running HTMLDB 2.0.
  
  For example, a CSV file with 12000 documents and 40 columns takes 40 minutes to load (while a recording of CSV 2000 file takes 2 minutes to load).

  For large external files, copy us our CSV files to the Oracle server and then make reference to the file in an Oracle external table. Once the external table defined you then load your APEX table via a stored procedure by using:

  INSERT INTO your_tbl (columns)
  SELECT (columns)
  Of external_tbl

  Hope that gives you another option to consider.

  Jeff

• Import an XML file into flat table

  Yhe, I am completely new to XML and I try to import a file into a flat table.
  I import a file with the xsd:
  https://www.ediel.se/EdielPortal/service/CompanyExport.xsd
  I am writing a question as simple as possible, but I'm stuck.

  SELECT *.
  FROM XMLTABLE ('/ firms/market/society ' PASSAGE)
  XMLTYPE (bfilename ('SVK_COMPANIES', 'test.xml'), nls_charset_id('ISO-8859-1'))
  COLUMNS
  path of varchar2 (60) namn "name."
  ["path of varchar2 (5) edielno ' IdentificationKeys/Key[@Type="EdielId ']',
  ["path of VARCHAR2 (3) svkid ' IdentificationKeys/Key[@Type="SvKId ']',
  ["path of varchar2 (1) typ_n ' Roles/Role[@Type="Netowner ']',
  ["path of varchar2 (1) typ_b ' Roles/Role[@Type="BalanceResponsible ']',
  ["path of varchar2 (1) typ_l ' Roles/Role[@Type="PowerSupplier ']',
  ["path of varchar2 (1) typ_o ' Roles/Role[@Type="ASP ']',
  path number (5.0) "BusinessFunctions/BusinessFunction[Type="PRODAT"]/@PartyId," prodat_ombud
  "[" path of varchar2 (200) email_prodat ' BusinessFunctions/BusinessFunction[Type="PRODAT"]/CommunicationAddress[@Type="SMTP ']"
  )

  The first works well, but does not work the last two. What I am doing wrong?

  A few typos I guess?

  You are missing the accessor of the attribute ' @' for the Type and the other wrong added on PartyId

  path number (5.0) "BusinessFunctions/BusinessFunction[@Type="PRODAT"]/@PartyId," prodat_ombud

  "[" path of varchar2 (200) email_prodat ' BusinessFunctions/BusinessFunction[@Type="PRODAT"]/CommunicationAddress[@Type="SMTP ']"

  SELECT *
  FROM XMLTABLE('/Companies/Market/Company'
    PASSING XMLTYPE(bfilename('TEST_DIR', 'test.xml'), nls_charset_id('WE8ISO8859P1'))
    COLUMNS
      namn         varchar2(60) path 'Name',
      edielno      varchar2(5)  path 'IdentificationKeys/Key[@Type="EdielId"]',
      svkid        varchar2(3)  path 'IdentificationKeys/Key[@Type="SvKId"]',
      typ_n        varchar2(1)  path 'Roles/Role[@Type="Netowner"]',
      typ_b        varchar2(1)  path 'Roles/Role[@Type="BalanceResponsible"]',
      typ_l        varchar2(1)  path 'Roles/Role[@Type="PowerSupplier"]',
      typ_o        varchar2(1)  path 'Roles/Role[@Type="ASP"]',
      prodat_ombud number(5)     path 'BusinessFunctions/BusinessFunction[@Type="PRODAT"]/PartyId',
      email_prodat varchar2(200) path 'BusinessFunctions/BusinessFunction[@Type="PRODAT"]/CommunicationAddress[@Type="SMTP"]'
  ) ;
  
  NAMN                                                         EDIELNO SVKID TYP_N TYP_B TYP_L TYP_O PRODAT_OMBUD EMAIL_PRODAT
  ------------------------------------------------------------ ------- ----- ----- ----- ----- ----- ------------ ----------------------------------------------
  Ellevio AB                                                   14900   006   1     0     0     0            14900 [email protected]
  

• How to load csv file into external table

  I'm using oracle 11g xe edition.

  probably error-boy, but I can't "see

  Command line error: column 21:12

  Error report-

  SQL error: ORA-00906: lack of left parenthesis

  create the table rgc_ext

  (

  First name VARCHAR2 (20).

  name vARCHAR2 (20)

  )

  EXTERNAL ORGANIZATION

  (

  TYPE ORACLE_LOADER

  CER default DIRECTORY

  ACCESS SETTINGS

  (

  RECORDS DELIMITED BY NEWLINE

  FIELDS

  (

  First name VARCHAR2 (20).

  name vARCHAR2 (20).

  Sate DOB

  )

  )

  LOCATION 'info.csv '.

  );

  Hello

  Try with the following text:

  create the table rgc_ext

  (

  First name VARCHAR2 (20).

  name vARCHAR2 (20)

  )

  EXTERNAL ORGANIZATION

  (

  TYPE ORACLE_LOADER

  CER default DIRECTORY

  ACCESS SETTINGS

  (

  RECORDS DELIMITED BY NEWLINE

  ' fields completed by ',' EVENTUALLY ENCLOSED BY ' "'

  (

  First name VARCHAR2 (20).

  name vARCHAR2 (20).

  Sate DOB

  )

  )

  LOCATION ("info.csv")

  );

• APEX 5: FILE item type to BROWSE not load file into the table apex_application_temp_files

  Hello

  I am trying to load the BLOB (CSV file) into apex_application_temp_files table using the file_browse item type. I have created an example page and the added element of type file_browse, added a dynamic action, which send item to browse.

  Also added a button load that submits the page. But when I check the apex_application_temp_files of APEX sql workhop table, nothing appears.

  I purge file to "end of Session. Enclosed screen shot as well.

  Thank you

  Ankit

  Hi Pierre,.

  has added a dynamic action, submitting travel item.

  How can you submit just the element go? How your dynamic action look like?

  But when I check the apex_application_temp_files of APEX sql workhop table, nothing appears.

  It is by design, because the sight of apex_application_temp_files limited to your current session. In your case at the session of constructor and not your application.

  Add a process to the page that contains the item "Browse file" when you use

  select *
    from apex_application_temp_files
   where name = :page item name;
  

  to access your downloaded BLOB.

  Concerning

  Patrick

• import files into a table

  Hello
  
  I need to import files into a table from a database. After importing I must record in another table, the name of the file, the current date and the State of import (0 - import ok, 1 error import etc.). All files has the same structure but different file names.
  
  Is there any possibility of cycle in the folder, import a file in the table and after that save filename to another table with the State of importation?
  
  Thanks in advance
  
  Gabi

  Hi Gabi,.

  Assuming that you have a set of files (.txt, .csv,...) in a folder with the same structure, but different file names.

  Solution:

  Get all the names of files and insert these names in a table temporary temp_filenames (filename, status).
  with the status of 'R' (walking).

  Delete No .txt temp_filenames .csv file names (for examle if no void / files / other file names are here).

  Add a v_filename variable (select * from temp_filenames where status 'R' limit 1)

  Create datastore source with the name of varaiable (#v_filename).
  (remove file extensions, the spaces between the names of files... all by creating tables in DB,)
  for this, you can use a variable more / apply your logic)

  the flow of processes in a loop (make sure whetehr the count is greater than 0 for the variable)
  If its gerater trhan 0 then processes the file with #v_filename.
  Once the upadate process successful status as a ' other (completed) 'E' (error)

  This will make a loop for all files in your folder

  Once the process is complete, you can insert the status of paper in your journal table looking into temp_filenames.
  Then delete all temporary tables you created

  Please let me know if you need further help with this.

  Its

• A query when importing an XML file into a database Table

  Hello
  I create an ODI project to import an XML file into a database using the following link Table.With
  
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/odi_11g/odi_project_xml-to-table/odi_project_xml-to-table.htm
  I am facing a problem when creating physical Schema for the XML Source model.
  For the
  Schema (Schema)
  and
  Schema field (scheme of work) that they have chosen to GEO_D.
  What GEO_D here?
  or
  What should I select here?
  (1) the XML schema (NB:-J 'I havn' t created any file .dtd for my file .xml or .xsd)
  or
  (2) my diagram of target servers
  Please tell me what I do?
  Thank you

  and
  Schema field (scheme of work) that they have chosen to GEO_D.
  What GEO_D here?

  Is the schema specified in the XML file name.

  What should I select here?
  (1) the XML schema (NB:-J 'I havn' t created any file .dtd for my file .xml or .xsd)

  Yes

  (2) my diagram of target servers
  Please tell me what I do?
  Thank you

• Anyone has any experience of importing a csv file and store it in a database in MS SQL

  Anyone has any experience of importing a csv file and store it in a database MS SQL. Outside sql injection there is any another converns security?

  Draft of the steps.

  1. use to download the file from the client to the server see
  http://www.dennismiller.TV/index.cfm/2007/12/26/file-upload-using-ColdFusion-and-Flex

  2. use to read the contents of the file into a variable.

  3. perform a loop on the content of variables for each line, dealing with the variable as a list delimited by a newline rather then a comma

  4. use list functions on each line to get the data you need, and then to transmit these data to SQL with CFQUERY or CFPROCPARAM.

• import a WAV file into iTunes?

  Can someone explain to me how do I import a WAV file into iTunes? I'm dragging in, right/option clicking on the file and go - open in iTunes but nothing happens and I can't play or do anything with it. Thank you

  It adds no doubt, but given that WAV files do not contain track information is to find with no name of the album and as the file name for a song title. Look in your recently added playlist.

• When I import a video file into Windows Movie Maker it plays Audio and video

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Original title: when I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Watch the video file. The last 3 letters represent the file format.

  Windows Movie maker only supports the following video file formats:

  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If yours is not on the above list, Movie Maker will have probel play.

  In this case, you will have to google for a free video converter and change the format of your video file to WMV. WMV format is the most reliable format for Windows. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I import an excel file into an already existing form on the PDF (via AdobePro)?

  How can I import an excel file into an already existing form on the PDF (via AdobePro)? No data just directly, drop-down lists.

  Hi spencert3881156,

  Please post on the Adobe forums.

  You can visit the following link on the same thread:

  Can I import data from an Excel worksheet to a PDF form? (Create PDF)

  Let me know if this helps.

  Kind regards

  Ana Maria

• Insert xml files into the table

  Hi all

  How to create an application, which allows me to download an xml file and insert the file into a table, looking something like what makes the apex, with 'data-> data-> Data Load XML Workshop'.

  I tried to create it using this link https://forums.Oracle.com/message/9170494 # 9170494

  but when loading the file and send it (current executing the "sp") sends the error "ORA-22285: file for FILEOPEN operation or non-existent directory.

  I could slightly auxiliary

  concerning

  This idea is troubling for me.

  The XML file DOES NOT CHANGE.  This is the goal.  You have a DTD/XST that defines where in the XML hierarchy, a data element is and (so) how to access it.  With this information, you can hardcode things.

  Therefore, you should have no reason for that functionality 'map the data column in the table column"of the data loader since all mappings will be always the same.

  As a simple INSERT... The SELECT statement can (and should) be used.

  (use the FUSION if you update / insert data).

  I copy + paste some of my code in a procedure that I use.

  You will need to replace the parameter name (p_filename) with the value of appropriate link (name of item)

    declare
      l_XML XMLType;
    begin
      /* get file from APEX WWV_FLOW_FILES */
      begin
          select XMLType( blob_content, 1 ) -- 1 means that the file is USACII encoded. this may need to be changed.
            into l_XML
          from wwv_flow_files where name = p_filename; -- replace this with the appropriate ITEM NAME
      exception
        when no_data_found then
          raise_application_error( -20001, 'not in FLOW: ''' || p_filename || '''' );
      end;
  
      /* you'll need to figure this one out */
      INSERT INTO T (...)
      SELECT ..
      FROM  XMLTable( '/'
  pasing l_xml
              columns
                     PATH  -- repeat for each "column" you want to extract
          );
  
     delete from wwv_flow_files where name=p_filename;
    end;