Import a scan of Epson Workforce 610

Similar Questions

• Cannot print the Vista Home Premium laptop on printer Epson Workforce 610 wireless

  Tried to implement printing wireless since our Toshiba laptop under Vista Home Premium to an Epson Workforce 610 printer.

  I have already implemented printing wireless this printer to my desktop under XP Home SP3 without problem and continue to be able to print from there.

  I went round and round with Epson.  They helped me get the printer configured on the laptop, but because the printer is working from the office, they say that it is no longer their problem.

  Here's what I know:
  -Wireless running on a Belkin Wireless G router, model #F5D7230-4, v.6xxx, with the firmware update.
  -L' laptop and printer are both connected to the same secure wireless network.  IP addresses all look OK, and I can see all devices when I look at the settings of the router.
  -I am running Trend Micro Internet Security 2009, but I turned it off.
  -Windows Firewall is also disabled.
  -I can print via the wireless router if the laptop is connected directly to the router.
  -No, I can't print from the laptop to the printer if the laptop is connected to the wireless network.

  I think there are some settings or configuration of Vista which is at the origin of the problem.  I looked the likely candidates in the properties of the printer and in the center of network & share, but I don't know enough about Windows or Vista to really know what to do.  Anyone has any ideas on this?

  Hello

  My suggestion would be to update the firmware on the router and wireless adapter first.

  Go through the following article. It can help you
  http://support.Microsoft.com/kb/314073

• Epson workforce 610 series

  I can't get win xp to recognize my new printer as the default printer

  Have you gone to the printers and faxes in Control Panel, click with the right button on the Printers icon and choose "set as default printer"?

• Epson Workforce 645 appears as the default on my computer and it says 'ready', but it will not be printed.

  Original title: printing problems

  I am facing a problem with the printer - or maybe a computer problem.  I can't pinpoint the problem.  My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed.  My documents will in Quebec, but after about 30 seconds, the State spends printing, error.  I've tried everything.  (Occasionally), it will display a test page.    Any ideas?

  Hi Julia,

   

  Thanks for posting the question in the Microsoft Community!

   

  You are unable to print and get the error message.

   

  I imagine the frustration you feel when you are unable to print.

  This can happen due to connection problems, malicious content or third-party programs.

   

  1 have you tried all the Troubleshooting steps?

  2 is the computer, or a printer attached to a domain network?

  3. are you able to print from Notepad?

  4. what documents do you speak?

  5 is the full error message?

   

  To check if it's because of connection problems malware content follow the steps mentioned below:

   

  Method 1: Run the troubleshooter

   

  See the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135 .

   

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

   

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• TWAIN drivers for my Epson Perfection 610 scanner that works with Vista 64

  I searched high and low for the two pilots that would allow me to continue to use my scanner Epson Perfection 610 on Vista 64. Except for the purchase of a costly program to scan, I am confused. Is there generic drivers that would work? Thank you.

  DRD, I imagine that you must have a HP computer with the Epson scanner attached to it.  Since it is a HP forum, it would be best to contact Epson to find a driver for your scanner.

• Acrobat freezes when scanning with Epson scanner in windows 10

  I upgraded to Windows 10 and installed the latest drivers for my Epson Workforce 635, the scanner, fax printer. Update of the acrobat software. Now, I am unable to scan to PDF, Adobe Acrobat pro 7.  Adobe Acrobat starts up, I see the beginning of Epson and the Acrobat stops responding.

  I've scanned in PDF format directly with the options of scan Epson, Abby Fine-reader 9.0 and Quick Books. I was also able to scan with Adobe Acrobat using the WIA driver.

  No Adobe Acrobat error freezes.

  Any suggestions?

  Hi ntanti,.

  Acrobat 7 is not more supported by Adobe & is also not compatible with Windows 10, so it is not possible to predict how Acrobat 7 will include no compatible platform.

  Please use the application in the compatible environment so that its fully functional.

  However, still you can try some troubleshooting steps, from a few Troubleshooting scanner questionscan be used.

  Kind regards
  Nicos

• I have an unable to print with Epson Workforce 2540 after update of the operating system at El capitan

  I cannot print on my Epson Workforce 2540 via my home wi-fi after updating the operating system to El Capitan (10.11.5).

  The news of printer Epson shows that it is connected to the network. After sending a file to print, I get this error message: stop - "filter" has failed

  The Mac App store shows that my printer software is up-to-date. Can you help me, please?

  did you go to epson web site and watch if they have a driver that support el capitan? If they don't you will have to revert to a version of Mac OS x, they have a driver for or get a new printer

• Epson Workforce 545 all-in-One: project of black and white print option is no longer in the menu drop-down

  Hello. I am trying to print in draft mode, black and white, but since I recently installed and then uninstalled a printer canon, printer all-in-one Epson Workforce 545 is more offers me black and white mode fast draft on the menu drop down.

  Thanks in advance for your help.

  It is a forum of HP.  The Epson Workforce 545 you had to best results in the Epson support pages here.

• My Epson Stylus 610 says to replace the ink cartridges, but I just put in new cartridges Epson

  My Epson Stylus 610 said to replace the ink cartridges, but I had just put in the new Epson cartridges.

  I have it reset, and I tried to clean up the area, but still the same message and cannot work around.

  My drivers are supposed to be updated.

  I can't print anything.

  [Moved from the community centre of Participation]

  Hello

  Welcome to the Microsoft community.

  What operating system is installed on the computer?

  You may need to check if you have followed the actual procedure to change the ink cartridges.

  Please see the following article:

  https://files.support.Epson.com/htmldocs/sc60__/sc60__rf/ink_1.htm

  https://files.support.Epson.com/htmldocs/pho22_/pho22_rf/ink_1.htm

  Kind regards

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unable to import photos scanned using Microsoft Picture IT 2002, error: he must be stopped.

  Original title: problem with Microsoft Picture It 2002.

  I've been using Microsoft Picture It on my computer for several years and I really like the program. I recently had to replace my computer a virus, so I chose to buy a new machine and still run Windows XP as I have been for many years. I reloaded the software on the new machine and everything seems fine until I try to import a scanned photo. It goes through the process of analysis very well, but just as he finished the scan it gives an error message and says he has to end! ?? I remember having the same problem when I first loaded the software on my other computer. At that time I contacted support and they helped me to get into the program and I did some kind of change that solved the problem, with their help. I can't for the life of me remember what it was they had me change?! I found a link to a downloadable patch, but the page is no longer valid. I can't find the answer anywhere! ?? I know that it's a simple solution and I hope someone here can tell me what is this simple fix! ?? Fingers crossed!

  Finally, I spotted a link to a working patch that fixed my problem. Looked for a 'pi19299 '. It took awhile to find an active link, but I finally did and it fixed it immediately and my picture it now works fine on my new XP with Internet Explorer Version 8 machine! Hooray!

• e4200v2 - problem connecting Epson Workforce 520

  I'm a smart guy, and I can follow the signs (mostly).  Got the e4200v2 put in place successfully with a ton of devices, wired and wireless.  Everything works - except the printer (Epson Workforce 520).

  The printer connects through WPS, but will never be printed.  Using Win7 Home Premium.

  I lived that, in my view, are all FAQs, tutorials-Cisco, and Epson.  Is there something I'm missing here.

  It may just be possible that this really nice, really smart router is unable to communicate with a wireless printer that is reasonably current, quite enjoyable.

  The problem was not with the router, but with the owner of the printer network communications.  Was to create a custom for the printer, using the given IP address port.

  The only thing to do is to create a DHCP reservation for this address.

  Quite.

• Vista 64 will not identify printer Epson Workforce 633

  Hello world

  New to the forum.  I just bought an Epson Stylus 633 Printer and Windows Vista Home Premium 64 bit does not recognize the printer.  All my USB ports seem to work (mouse, keyboard, external hard drive), but when I plug the printer into the USB port it does not recognize the printer.  It should be noted, I recently had to reinstall the OS, but I think I have everything done properly and reinstalled everthing correctly.  Help, please!  It drives me crazy!

  Hi Yesjams,
  
  Unfortunately, we didn't found any positive results when we checked the compatibility of the Epson Workforce 633 printer with Windows vista operating system.
  
  Reference:
   
  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=Epson%20Workforce%20633%20Printer&OS=64-bit 
    
  I suggest you to install the drivers for the device in compatibility mode and check if this solves the problem.
  
  a. Locate the installer.exe or setup.exe in the folder of the driver.
  b. right-click on the file.
  c. on the shortcut menu, choose Properties.
  d. on the Compatibility tab, choose the version of Windows (XP sp3), you want to emulate.
  e. check the box "run this program in compatibility mode". Run the Setup program
  
  Reference:
   
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Driver Epson perfection 610 for Win7?

  Is there a driver for my old Epson Perfection 610 scanner work on a new Win7 desktop PC?

  The latest Epson driver released for your scanner was the XP driver.

  You have two choices.

  You can use Vuescan with your scanner. It can be run under Windows 32 or 64-bit, but it costs $40 as a standard...

  OR

  You can buy a new scanner...

• Why my Epson Workforce 630 does not print using my Windows 7 computer?

  I have a printer Epson Workforce 630. All cartridges are new, just replaced. The ink levels are normal on the printer and it prints documents audit nozzle locally and my small laptop running Windows 7. It is also used to print from my desktop Alienware x 51 running Windows 7. My computer is connected to Ethernet and the WiFi printer to print. This is not him point because I've had the same setup for over a year now, and that worked before. The printer is recognized on my computer. I can ping on command prompt, sign in to Chrome and it is listed as being active in my list of devices and printers. I can't print in WiFi or USB. When I try to print wirelessly, it merely display the normal print screen, no errors. Then after a few minutes, I check the print queue, and there is an error - printing... from the state table. When I connect via USB, it gives me an error of communication. Here is a good list of things I checked:

  • I checked the control panel of Verizon. The printer is active and online.
  • The printer WiFi light is green.
  • The printer has ink Epson and can print locally.
  • The printer can print from another wireless laptop and a USB connection (running Windows 7, same as my Alienware x 51).
  • The printer used to print on my current configuration of the office.
  • The printer returns the packages when ping via the command prompt.
  • The printer can be connected to the use of the local address that is located on the control panel of Verizon via a web browser.
  • The printer has a large green checkmark beside him in devices and printers and is listed as being active.

  Here is a good list of things that I tried to solve the problem:
  • Uninstall and reinstall the latest drivers for the printer (several times).
  • Connect via USB and have Windows 7 trying to print via USB. Communication error.
  • Turn off the printer and turn it back on.

  Here is a list of the things I'm doing which could have caused the problem:
  • I joke with the rules in the port forwarding Verizon Control Panel. I deleted a bunch, a few months ago. However, other printers can print, so I don't know.
  • I fiddle around with regedit, and I defrag my registry of every day. Could it have caused the problem?
  • I have a lot of process stop and disable services that I have no idea about.
  • I delete the files I'm not familiar with.

  Any ideas?
  Thank you!

  Hi carbon,

  As he did not work in the administrator account, we need to repair the operating system files.

  You can perform in-Place Upgrade (repair install) and check.
  The detailed procedure is suggested in the following link.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps!