Import a virtual machine across clusters using converter

Similar Questions

• VMware 6.5.5 cannot import the virtual machine that uses 2GB "disks of split.

  Hello

  I'm using VMware Workstation 6.5.5 under Win XP. I tried to import a virtual machine that was created by using the option 'Split' virtual disks into files of 2 GB. The import fails and presents a pop-up: ' Conversion Assistant/cannot determine the guest operating system. The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, there are more files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  Thank you.

  -Phil Anzel

  FYI... VMware Workstation peut import a Virtual Machine that uses twoGbMaxExtentSparse discs.

  The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, rather there are files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  The problem is that you're missing the "disk DescriptorFile", "cofortcol3v01 - cl1.vmdk" and which is why it's a failure and not a limitation of the Conversion utility.

  Also if you actually had a Virtual Machine created in VMware Workstation 5.1 you can simply run directly under VMware Workstation 6.5.5 without having to run the import command.

  Anyway, if you have a backup that you can recover the file "cofortcol3v01 - cl1.vmdk" then you should be fine and if you have not then a new can be created.  If you can archive (compress) files vmware*.log (usually 4 of them) in a single zip file archive and tied him to a post in response, then one of us will create a new file "cofortcol3v01 - cl1.vmdk", based on the information contained in files vmware.log for you, if you don't know how to do it yourself.

• Import a virtual machine in ESXI Server

  Hello

  I'm having a problem importing a virtual machine into the ESXi server. I downloaded the folder with the VM and then after the download, I opened the folder in the data store, click on the .vmx file, add to the inventory and then when I go to power on the virtual machine, you receive an error.

  

  Can someone tell me what Idid hurt, actually there at - it a guide step by step somewhere?

  Thank you

  Richard

  for me, I like to use the converter, it works and takes care to ensure that all parts of the VM needrf are transferred into your ESX (i) environment.

  Download VMware Converter, install and convert machine.   Source type is another virtual machine of VMware or VMware Workstation.  Type of destination will be the virtual machine VMware Infrastructure.

• Could not enumerate the virtual machines that are used as models

  Hey guys,.

  I have a simple script that collects information from a virtual computer. Unfortunately, I'm getting a lot of mistakes, he doesn't pull out information if the virtual machine is used as a model.

  $date = get-Date-format-M - d - yyyy

  Import-Csv C:\test\servers_mate.csv - UseCulture | %{

  Get-VM-name $_. Name |

  Select Name,

  @{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.

  Host, NumCpu, MemoryGB,

  ProvisionedSpaceGB, Powerstate,

  @{N = "Path"; E = {}

  $current = get-view $_. ExtensionData.Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  FolderId,

  @{N = "Manufacturer"; E = {(Get-VMHost-Name $_.)} Host). Manufacturer reference}},

  @{N = ' model'; E = {(Get-VMHost-Name $_.)} Host). Model}},

  @{N = "ProcessorType"; E = {(Get-VMHost-Name $_.)} Host). ProcessorType}}

  } | Export-Csv "C:\test\servers-vcenter-servers-vmpath-$date.csv" - NoTypeInformation - UseCulture

  the output current is like that.

  Name

  Data Center

  Cluster

  Host

  NumCpu

  MemoryGB

  ProvisionedSpaceGB

  PowerState

  Folder path

  FolderId

  Manufacturer

  Model

  ProcessorType

  I just also want to collect the same information, even if the virtual machine is used as a model. Introduction 1 additional column is perhaps something like below. So we can clearly identify if it is a virtual machine or be used as a model? Thank you.

  Name

  Data Center

  Cluster

  Host

  NumCpu

  MemoryGB

  ProvisionedSpaceGB

  PowerState

  Folder path

  FolderId

  Manufacturer

  Model

  Type of processor

  Virtual MACHINE or template

  Erros I receive.

  Get - VM: get-VM VM with name 03/08/2015-12:40:44

  "xxxx" was not using the specified

  filter (s).

  Online: 2 char: 5

  + Get-VM-name $_. Name |

  +     ~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.GetVM

  Try something like this

  Import-Csv C:\test\servers_mate.csv - UseCulture | %{

  Notice-EEG - ViewType VirtualMachine-filter @{'Name' = $_.} Name} | %{

  $esx = get-view-Id $_. Runtime.Host

  $_ | Select Name,

  @{N = 'Template'; E={$_. Config.Template}},

  @{N = 'Center'; E = {Get-Datacenter - VM $_.} Name | {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_.} Name | {{Select - ExpandProperty name}}.

  @{N = 'Host'; E = {$esx. Name}},

  @{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},

  @{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.

  @{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},

  @{N = "Powerstate"; E={$_. Runtime.PowerState}},

  @{N = "Path"; E = {}

  $current = get-view-Id $_. Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  @{N = "FolderId"; E={$_. Parent.ToString ()}}.

  @{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},

  @{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},

  @{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}

  }

  }

  The error you see seems to indicate that there is an entry in the CSV file for a nonexistent VM.

• Import the Virtual Machine Notes to new vCenter 5.1

  Is there a way to import the Virtual Machine Notes to a new vCenter attribute? I am able to export notes to help

  $vm = get - VM | Select Name, Notes

  $vm | Export-csv notes.csv

  but cannot find a way to import...

  Thanks Andy

  Hi Andy,.

  to import the attribute information about the virtual machine in a new vCenter server, you can use the following script PowerCLI:

  Import-CSV -Path Notes.csv |
  ForEach-Object {
    Get-VM $_.Name |
    Set-VM -Notes $_.Notes -Confirm:$false
  }
  

• How to import a virtual machine of 3.5 to 4.0?

  I need to be able to migrate a VM from 3.5 to 4.0.

  1 moving to a shared LUN virtual computer - done

  Need help with

  1 import the virtual machine in 4.0 of the LUN that is shared; the script below does not work.

  $Datacenter = 'test '.

  $VMName = "test-VM.

  $ESXHost = get-vmhost | Sort-Object MemoryUsageMB | Select first name - 1

  $ResourcePool = get-VMHost $ESXHost.Name | Get-ResourcePool | Get-View

  $vmFolder = get-View (Get-data center-name $Datacenter |) Get - Folder - name "vm") user.user

  $vmFolder.RegisterVM_Task ("[SHARED_LUN]" + $VMName + "/" + $VMName + ".vmx", $VMName, $false, $ResourcePool.MoRef, $null ")

  Thank you

  It will work, but you will need to use the - Server parameter in the cmdlet Get-Data Center to indicate what vcenter you want to recover the data center.

  Suppose you have two vCenters, called VC1 and VC2, then you can get the data center under VC1 like this

  $vc1 = connect-VIServer-Server VC1

  $vc2 = connect-VIServer-Server VC2

  Get-data center-name SameName-Server $vc1

  If you'd

  Get-Datacenter -Name SameName
  

  you will get a table with 2 objects, an object for the data center in each vCenter.

• VCac fails to VCO registerVirtualMachineRequest 'Import vCenter Virtual Machine'

  VCac Ver 6.1

  VCO worm 5.5.2

  VCac 6.1.0.2040915 Plugin

  
  Hi all

  I have an external VCO device configuration and Vcac. I am under some test workflow to get the clones of a virtual machine, and then import it into Vcac so that its life cycle is managed. I'm at the stage where I just test of VCO with the out-of-box plugin workflows. I am able to run a workflow to modify the Vcac without any problem. When I run a workflow 'import Vcenter Virtual Machine' in VCO workflow is completed successfully, but the machine is never added to Vcac. I see these messages below in my journal Vcac. Where it says (my username), this is the value of the user of the identity when I run the workflow. I have admin tenant and tissue rights. What is the purpose of this user identity? I can leave the field blank and always get the same answer, he'll just be blank where is the user name.

  (My username) System.ApplicationException: Access denied to the DynamicOps.VMPS.Security.AuthorizationService.CheckAccess (IdentityToken token, try to String, String group, String tenantId) at DynamicOps.VMPS.Service.ProvisionService.RegisterExistingVirtualMachine (IdentityToken identityToken, Guid virtualMachineID, Guid hostReservationID, Guid hostStorageReservationID, Guid virtualMachineTemplateID, owner of the chain)

  Workflow "RegisterVirtualMachineRequest" failed with the following exception: object reference not set to an instance of an object.

  Any help would be appreciated,

  Chris

  Sean,

  I just got this work, thank you for the business group index. It turns out that my user identity must be qualified full [email protected] to work because our SSO keys out of our ad.

  Thank you

  Chris

• After you import the virtual machines in LM, can I remove VC

  Hello

  I had a couple of machines to import the configuration of another admin... After you import the virtual machines in LM, can I remove the virtual machines, I imported VC? I now have more need to fight them with VC. LM depends on of these always after import?

  I do not believe, but you can rename the folder and see if something is complaining.  If it isn't, it is probably safe to delete.

• Is there a way to tell if a virtual machine was created using the LSI or BusLogic SCSI device?

  Is there a way to tell if a virtual machine was created using the LSI or BusLogic SCSI device?

  No worries, you can try going to the virtual machine and looking for an online .vmx file such as - scsi0.virtualDev = "free".

  I shot on a vmware workstation VM, don't know if it's exactly the same vmware server, but is worth a visit.

  • Kyle

• No network on the virtual machine after the use of converter

  I was running a basic vm (WinXP) on an esxi4.1 host running short of disk space.

  So I ran the vCenter Converter Standalone client to copy the original VM on a new - the only thing that I changed the size of the disc thin provisioned avaiable.   The copy/convert seemed to work your.

  I started in the new virtual machine, and it came exactly as the old one (with the largest disk).

  ... but the network on the works of more than vm.

  I can still use vSphere to connect to the esxi server and bring up the VM console (which tells me that the network the server works very well).  When I look at the configuration of the virtual machine, it looks exactly like the old (complete with a network powered).   But on the virtual machine, I can't even ping the router, much less get to the dhcp server.

  I even went so far as to stop the virtual machine, remove the network card, restart the virtual machine (if the network has been removed from the virtual machine), stop the virtual machine again, add a NEW network adapter.

  Still the problem remains.  The virtual machine has a network card - but has no network.

  A few thoughts:

  You use a managed physical switch? If so, check if the MAC address of the VM is seen on one of the uplink ports.

  The network management and the virtual machine using the same IP subnet? You could probably try (if possible) is to create an another vSwitch and attach the XP VM to it to see if there is a problem with the virtual machine and the management on the same vSwitch network.

  André

• How to export/import a virtual machine with ESXi 5

  I use the free version of ESXi 5 and have created a virtual machine that is configured with the software for our project. I would like to share this virtual machine with other members of the team, some of whom are in other places and have slow network connections.  I want to pack the VM in a reasonable size file or a set of files I could ftp (or put it on DVD for people in areas of slow network) that they could then import into their ESXi hosts. The virtual machine has a 60 GB drive that is implemented by using the option 'thin', so it contains only 6 or 7 GB of real data right now.  Is it possible to export the image to a file or set of files that can be imported to another people ESXI host?  Before when I used VM Player we could do this by upgrading backup files in virtual machine directory and copy them to the new machine. With the ESXi data store, I don't know that something like this can be done.  I used vCenter Converter to convert to ESXi Infrastructure VM in VM Player format (and vice versa), but it is extremely slow. I think I might point the Source to my ESXi host and the Destination to a co-workers ESXi host and run a 'conversion' to transfer the files, but I think it would be very slow and impractical for some people to 'slow-network '.  I tried with vSphere Client navigation data store and I see the download options, but when I tried to download a VM directory it just hung.  I enabled ssh on my server ESXi and I found the store of data under/vmfs/volumes and when I look in the folder that contains my VM, there a file myvmname - flat hard which is 60 GB in size, so if I tar the contents of this folder to move elsewhere it will be huge.

  Can anyone suggest a solution?  The licensed version of ESXi would offer better alternatives?

  You can watch export OVF available in the Client vSphere for this function.

• Import the virtual machine created with .exe files

  Hello

  I'm new in the world of the virtual machines, and I'm sorry if I'm going to say something stupid.

  I take a .net class and the teacher has a virtual machine (windows XP with software) ready to pose with 4 .exe files.

  I installed VMfusion but now I have no idea how / if I can import the teacher VM fusion.

  Is this possible? If this is not the case, what can I do else?

  Thank you very much

  Luca

  Find a Windows PC and run the exe files to extract the virtual machine, precompiled.  Just copy the folder of the entire virtual machine on your Mac, and then open/run the virtual machine using the merger.  VMware virtual machines are portable between products and host operating system - there should be no reason to "convert" or "import".

• HO to import a virtual machine in esx host

  Hi all,

  I have a cluster of small esx (2host clustered in a datacenter) manged by a machine virtual vcenter. Now, I installed an esx on a small host outside the cluster, do some test activities that must be totally separate from my cluster of production.

  Before you perform the test esx host, I created some virtual machines in the production cluster. Now I want to import into my test esx host without have to reinstall them. Can I do this? the only way to achieve that I thought is to add my existing test in my data center host, leaving outside the cluster. then move my vms and remove it then, to manage alone.

  Is this possible without any risk to my cluster of production? is there any other solutions?

  Thank you very much

  Paolo

  Yes, but you cannot connect a free version, you need a license.

  To not change your existing cluster, simply add the host in the data center (so it's outside the cluster).

  When you are finished, just disconnect and remove the unused host.

  André

• Can I use the same product key in a virtual machine that I use for the Windows installation that hosts the VM?

  I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?

  Thank you!

  No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• Import a virtual machine from a backup of Symantec .sv2i

  I need to create a virtual machine from the backup of a Windows physical box created with one of the latest versions of Symantec BESR.

  VMware Converter Standalone documentation reading - I see that only the backup made with Symantec BESR 8.5 and earlier files are supported.

  Can someone please provide a solution or at least advice?

  Concerning

  Marius

  Hello

  You can create a temp disk (VMDK) to an existing virtual machine, and then put your backup file on the disk.

  Detach the VMDK and then assign to a new virtual machine as a second disc (the virtual machine you need to restore the backup to that).

  Then start the virtual machine of the Symantec BESR startup disk and restore the secondary drive on the first disk backup file.

  After that detach and remove the second disk.

  Of curse, this solution may not work after restoration because you made the physics of the machine backup and restore to a virtualized platform.