Import first Pro (.prproj) sequence

Similar Questions

• First pro, Nested sequence lowers the resolution

  Hello.  I worked in a project in first pro 2015 cc and I have problems with nesting. I hope you guys can help. im a beginner so I have no idea what the problem is. It seems to me that when I nest several layers in a sequence and zoom, the resolution of the images inside the drops significantly.

  
  

  the image itself is not low resolution. If I return to the main sequence and recover the original and place it parallel to the nested version of the original, you can see a huge difference.  as you can see in the screenshot below.

  
  

  

  
  

  What should I do? I'm I doing something wrong? or its supposed to be like this?

  When I nest several layers in a sequence and zoom, the resolution of the images inside is significantly reduced.

  This is the expected result.  Upper scaled 100% cause visible degradation.

• video does not appear in speedgrade when you do a direct link from first pro

  When I do a direct link from first pro, the sequence appears to download correctly, but the video appears on the screen. It appears on the timeline and audio renders perfectly.

  It seems that my graphics card doesn't have enough RAM, in case someone else has the same problem.

• Adobe first Pro CC 2015 support direct import and editing of sequences H.265?

  Hello, please let me know if Adobe first Pro CC 2015 supports direct import and editing of images H.265. If not, when?

  Hi dchakalov,

  Hello, please let me know if Adobe first Pro CC 2015 supports direct import and editing of images H.265. If not, when?

  First of all, we don't know what will be called the new version of Premiere Pro. We will not support this format in the next release of Premiere Pro. We cannot say exactly when the feature is applied, but please, leave your request here: http://adobe.ly/feature_request

  Thank you
  Kevin

• First Pro CC cs6 import only audio and no video

  Recently I visited an AE CS6 file, but when I try to import in first pro only allows me to add to the timeline as audio, although I can see the full video (sound and Visual) perfectly in the project folder. The rendering of the ae file is a MPEG-4 h.264, AAC Codecs. Is the problem with AAC or a bug? I tried to open the sequence after the first early, but that did not help. He plays very well in a video outside the first.

  Thank you!

  Hi Juliusn,

  Please visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you
  Ilyes Singh

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• Issues every time I try to import a clip on the timeline on first Pro CC. anyone else having this problem?

  I will have questions whenever I try to import a clip on the timeline. It imports the sound but not the picture in time.

  They play perfectly on the Source monitor and even hover on the bins scouring, but cannot slide on the timeline.

  I found that it allows me to replace anything on the timeline with all that is on the Source or the bins, but not directly place.

  I work with the Canon C100 files on first Pro CC (2015.2) On Windows 10

  But it happens with all type of formats. Obviously not codecs problems.

  How can I fix that?

  Sounds like a follow-up/patch issue, in general, you do not have the blocks to the left of the command sequence "checked" block to allow the targeting of these tracks. These things...

  

  Neil

• Record the sequence as a new independent project in first Pro CC.

  Hello. I have a project of first Pro CC with several sequences. I want to save one of these sequences as an independent project, but can't find a way to do it. Can someone please help?  Thanks in advance!

  Do new project and import the sequence via the media of the project its browser to.

• Import old project in first Pro CC

  I have an old project that, at the time when the computer was not able to handle HD files. So I converted the widescreen HD1920 x 1080 to 720 x 480. Today, I would like to import this project in first Pro CC using the HD original files.

  Import alright and I unchecked file extensions match so I could tell him where to find the HD files. But the time line still think that these files are Standard video .avi rather than new HD files. So, I see only a part of the video. Even if I export to Media Encoder Source said 720 x 480.

  My question is how can I tell the sequence that files on the timeline are now HD 1920 x 1080 and treat them properly?

  Hi Michelle,

  Go to the settings of sequence/sequence and stand mode editing custom first, then size of video image 1920 x 1080, which was the size of the original frame of your HD files.

  It will change the size of your sequence, you can also adjust the size of the pixels just below the frame size of video to adjust the proportions of the clips to fit into a base.

  

  Kind regards

  Navdeep Pandey

• Import and stabilizer the sequences of the Pro Pre AE CC CC.

  Greetings to you all, sequelae and premiere Pro cc experts.  I have a question that is probably very easy to answer, but for the life of me I can't understand it.  I have some pictures that was bad shot that gave me and that runs approximately 60 minutes in length.  I need to stabilise about three minutes of this film in the middle.  How can I go to enter only three minutes in aftereffects to stabilize?  I have to cut images and restore while these three minutes?  When I try to import now in aftereffects and apply the function to stabilization, he tries to analyze the entire 60 minutes.  In addition, any help you can offer on how best to stabilize images in general would be appreciated.

  You can cut the first layer and then copy and paste this layer in After Effects. Or you can use the import Premiere Pro sequence option in AE.

  Alternatively, you can apply stabilizing Warp in first and move AE entirely.

• First Pro CC refuses to make the sequences

  I have a project in Premiere Pro where I have a lot of sequences that must be made for editing. A lot of Red here! However, anytime, that I try to make pressing enter or even by selecting a few pieces to render into pieces, the render window rises and is located at 0.01% and will be not rendered frames at all. If I try to cancel it, gives a message "not responding" and I have to force close the application. I tried to empty the cache memory media and even uninstalled and reinstalled but still, it will not be rendered. This is not a problem with a project, but some of them get about 70-75% done they stop. Moreover, these projects have been started in CS6 (which I have not) and converted in a CC project by Premiere Pro. I'm running on a machine Windows 7 Professional 64-bit with the Intel i5 2.67 GHz processor and 8 MB of RAM.

  Help, please! I can not change if I don't!

  I tried to create a new project and import the relevant sequences of the original project. So far, it seems to make completely without stopping or crashing. This saved time for sure, and I would definitely say that the first Pro CC conversion process is wrong if this is how it works. In any case, thank you all for trying to help. I appreciate the advice.

• First pro cs6 mac import failure prores and dnxhd says format unsupported or damaged

  Hi all

  I am running OSX Mavericks and have sequences video avchd import into my project.  He went all out.  I am an intermediary file and tried to prores and dnxhd formats.  When I created a new project and tried to import a format I get the above error.  In addition, when you try to read the prores file with quicktime it won't play.  I have a Windows virtual machine with an earlier version of the first pro that has the neat video.  I created the file dnxhd on it and was able to import the file into PP on mac and the processing of these int h.264 movies.  What do you think of the error not be able to import a format on my mac?  Could there be an error on the export into media encoder?

  Mark

  It seems that I solved my problem and I wanted to post the resolution.  Apparently, the Avid codecs play nice with Quicktime on Mac and make Adobe QT32 Server crash.  Even if a file has been made, with server QT32 crashing it was unreadable.  The first thing I did was to delete all codecs in MacHD/library/Quicktime.  I restarted my computer.  Then I added the Apple codecs.  Voila, I can now encode to the Prores format.  I tried to add the dn only Avid codec, and I had the same problem.  I tried the version 2.3.7 and 2.3.9 without success.  Looks like I'm not 'be able to encode DNXHD files and read my existing will require adding the codec, export to the quicktime-no format and then delete for any future encoding prores codec.  If anyone has a solution to make the Avid DNXHD codec work please let me know.

• import the first Pro CC project in AE CC: error

  In first Pro CC, I created a rough cut with nested sequences, text/titles and some footage speedup.
  Now I need to import the data into AE to create the graphics and everything, but whe trying to import the first protrusion in AE, I get the following error:

  "CEAP Premiere Pro Import Plugin: don't loar Premiere Pro project, the version number is incorrect or the file is corrupted (5027: 12).

  Any idea what's going on? I re-recorded the PP file but that did not help

  The best

  Menno

  Just solved by copying all elements in PP on a new project, PP.

  Then the project is important in AE.

  All securities are solid black, it's a disappointment but...

  Menno

• Import with first Pro CC problems

  Imports of the DSLR footage with audio only in first Pro CC and CC prelude but normally import into Premiere Pro CS6

  Try this:

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• First Pro CC does not create a new sequence with a new project

  I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.

  In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.

  In CC, once you have created a project, you end up looking at an empty timeline.  You then go to the file, new, sequence and it do.

  Looks like a strange step to include, no?

  Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?

  Yes, as Jim mentioned, there are other ways to create a sequence.  For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip.  Or in the project Panel, drag an item to a new item icon.  Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.