video does not appear in speedgrade when you do a direct link from first pro

Similar Questions

• The Task Manager does not appear, nothing happens when you select it

  It is very difficult to get help. Now, I'm not sure if this is the right forum and place to be. I need help to get the Task Manager which has disappeared from my computer. I click right on the taskbar, and then click on task manager and nothing appeared. Please advise on how to find him.

  Hi disillusionedvery,

  If you're not, try to login as an administrator and see if that makes a difference.  If so, we still have a problem, but at least we know the Task Manager is here.  If you have any other user accounts on the computer, try connecting them and see if they all have the same problem or if it is limited to one account.  Your profile may be damaged and if this is the case, post back and I will provide procedures about how to fix it.

  Try pressing CTRL-ALT-DEL all at the same time and click Task Manager on the screen that appear and see if it works to access the Task Manager.

  If this does not work, let's try the following:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If it does not, then thanks for posting error messages in the event viewer on the Task Manager (Start / Control Panel / administrative tools / Event Viewer).  Look in the system section.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  Do you know when this problem started?  If it has been reasonably recent, try a restore of the system to a point in time BEFORE the problem started. If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, you may be infected with malware.  Update and run a scan complete with any security software you use.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If you find something, especially something you can't delete, then after return.

  That's enough for now.  One of these procedures will be hopefully resolved or at least identify the problem.  If this isn't the case, please post back with the answers to the above questions, results of the tests and procedures that you did (including copies of errors if any found), your version of Windows (for example, 32-bit Vista Business SP2) and anything else that you think may be useful.  We will then decide where to go was from there, armed with more information and know what and did not work.

  I hope this helps.

  Good luck!

• SpeedGrade hangs whenever it is launched stand-alone and never works when you use the direct link to first.

  SpeedGrade hangs whenever it is launched stand-alone and when you use the Adobe SpeedGrade of first Direct link it closes only first. He never try to open same SpeedGrade. All effects have been removed and I managed with this in the past using CC, it is a new problem. Any ideas?

  FxFactory plugin looks at the origin of the crash. Please update the plugin, which should solve the problem.

  Thank you

  Fran

• Error message: "the Task Scheduler service does not appear to start" when you back up files.

  Original title: error in Vista Task Scheduler

  Hello. I am running Vista Home Basic. I'm trying to back up my files, but get an error stating that "the Task Scheduler service seems not be started. Please start the Task Scheduler service and try again. "I don't know what that means and I couldn't save my files before. Do you know how I can fix this problem? Thank you

  Hi MK_806,

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  For more information, you can also consult the following article:

  Troubleshooting Task Scheduler

  Hope this information is useful.

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• new album created in iPhoto does not appear in iTunes when I'm syncing my phone?

  I created a new photo album in iPhoto, and this album does not appear in iTunes under the photos when I'm syncing my phone.  an album has 836 photos also but in iTunes when I sync the same album shows that there are only 736 photos... Why are the new photos not added?

  Thank you

  This can happen if the iPod Photo Cache in your iPhoto library is corrupted.

  What version of iPhoto do you have?

  Try to remove the iPod Photo Cache in your iPhoto library, such as described here - see the link: iTunes: understand the folder iPod Photo Cache

  And try to synchronize again.

• Box "Save as" does not appear as selected when windows

  original title: "Save as" box (Windows 7)

  When I want to save a file to the box "save under" does not appear on the top of other windows.  I have to minimize other windows to access.  How can I get the box "save under" always seem to be on top of everything else?

  Hello

  I suggest you install the latest version of Adobe reader and check.

  a. start Reader or Acrobat.

  b. choose Help > check for updates.

  http://get.Adobe.com/reader/

  Check also if you face the same problem if you download a pdf file using a different browser.

• my site does not appear in BusinessCatalyst when I press preview

  Hi, I recently wanted to add web trade to one of my sites that I was building in muse, then I went to BusinessCatalyst, test site has chosen him given a name and then return to muse and pressed publish and chose the drop down menu to find the site on BusinessCatalyst and then published.  But no matter how many times I do it, this site does not appear when I press an excerpt in the catalyst for business.  I just get the yellow coming soon the support page.  Checked while the address of the site is the same, but it will not show.  Anyone know what I did wrong? Thanks a lot for any comment, Michele

  Hi Michele,

  If you go through creative cloud and your 5 free sites that you do not pass BC for this. The sites are a special basic plan.

  So a proposal based on the information you have provided I would say... One of your 5 free sites has a name and shows in your drop down list Muse. You went to BC and made a website with a similar/same name. You see the other site, not the trial eCommerce you think you do in your drop down list Muse... Or conversely where the preview is the CC of the not e-commerce site a.

• iPhone does not appear in iTunes when connected

  iPhone does not appear as a device in my iTunes window, although it connects and works perfectly with the IMAGE CAPTURE.  IAM using an iPhone 6 with a Mac running OS 10.8 and iTunes 12.2.2

  Check this

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Hope this helps, good luck to you.

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen & when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Apple Watch does not a Ding noise when you plug in the charger

  Recently my watch Sport Apple stopped making noise "ding" when I connect the charger it. This is happened after I changed the bands and noticed two green lights on the back of the watch as I turn off the watch. I checked the volume on both the watch and the app on my iPhone 6 Plus and they are correct. Has anyone experience this problem?

  Hello

  Try to restart or if it does not help, force the reboot - your watch:

  -Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

• Flash video does not appear in the browser

  In Flash, the load preview, video, but in browser (locally) its just empty
  I tried to create an empty flash with just the video file, it does not load in that.
  
  I don't have to use the import of files flash video, the selected file and added it.
  
  Thank you
  Josh

  Well, it works now. I just tried to put it on my local machine and it works fine now. I had everything, including the video on a local file server. I guess that's a problem. Which is weird, but it works now.

  Josh

• oci_close does not release the connection when you use DRCP

  Hi all
  
  We are currently testing the deployment of DRCP with 11g. I have the setup of this (to my knowledge), but I am facing a problem. Oci_close call does not seem to release the connection to the pool, because I expect and that is why we see similar behavior as we receive without using the DRCP.
  
  Our facility is using two instances of CCR 11.1.0.6.0 running, I use PHP 5.1.6 with installed from PECL oci8 1.3.4. DRCP pool is configured and launched, each with 100 servers max.
  
  When the Web server is idle, well, it looks like slow motion.
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 0
  2 0
  
  
  The script is as simple as that:
  
  <? PHP
  $c is oci_pconnect ('scott', 'tiger', 'IWPPOOLED');.
  $s = oci_parse ($c, ' select * from emp');
  $r = oci_execute ($s, OCI_DEFAULT);
  oci_close ($c);
  Sleep (30);
  ? >
  
  What I expected, it's that the script would be to connect to the pool, doing work for a little while and then release the connection for use by other scripts.
  
  But after I point the browser to the script, I get a 30 seconds time of loading (as expected) but the server is busy all the time, like this:
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 0
  2 1
  
  After 30 seconds of sleep, he is released and busy servers are at 0.
  
  If I load the server with ab using 256 connections:
  
  AB - n 1000000 - c 256 k - http://mywebserver/ocitest.php
  
  the pool is at the maximum and links are at a standstill:
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 95
  2 95
  
  
  My config this service network is the following:
  IWPPOOLED =
  (DESCRIPTION =
  (LOAD_BALANCE = ON)
  (FAILOVER = ON)
  (ADDRESS = (PROTOCOL = tcp) (HOST = 10.1.16.33)(PORT = 1521))
  (ADDRESS = (PROTOCOL = tcp) (HOST = 10.1.16.34)(PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = IWP)
  (SERVER = POOLED)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  (RETRIES = 5)
  (TIME = 3)
  )
  )
  )
  
  The phpinfo() function will look like this:
  Active oci8 support
  Version 1.3.4
  Revision $Revision: $1.269.2.16.2.38.2.20
  Active persistent connections 1
  Active connections 1
  Oracle Instant Client Version 11.1
  Active temporary Lob support
  Support for collections enabled
  
  Directive value local value Master
  OCI8.connection_class IWPAPP IWPAPP
  OCI8.default_prefetch 100 100
  OCI8. Events on the
  OCI8.max_persistent - 1-1
  Off oci8.old_oci_close_semantics
  OCI8.persistent_timeout - 1-1
  OCI8.ping_interval - 1-1
  Off oci8.privileged_connect
  20 20 oci8.statement_cache_size
  
  
  I use the instant client for 11g
  
  Any ideas?
  
  Thank you!
  Michal

  Don't forget to use oci_free_statement ($s); See "Closing Oracle Connections" in the Underground PHP and Oracle manual. (I was just simplify this example today for the next version of the manual).

  You can also see the "dedicated optimization", where a server pooled in a non-maxed-out pool is retained (except if needed by another process PHP) assuming that the initial process of PHP can become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf

  Feel free to email me (see my profile) offline if questions/data that you don't want to display.

  CJ

  Published by: cj2 on October 16, 2008 08:12

• Time Machine does not recognize the backups when you configure the external drive as a network drive

  I have a MyBook 5 to disk with a 1 TB partition that I used as a destination for Time Machine > 1 year now. I recently gathered the energy to connect the my book on my Airport Extreme Base Station (model 2014? the second model) to implement wireless backups. I plugged the MyBook on the base station, set up file sharing in AirPort Utility and created an account with access to the partition of TM on the MyBook under the section 'Sharing secured disk' utility.

  Now, when I open the time Machine, I choose this partition, but it does not seem to recognize that I have a string of backups already there. Then he tries to start a new backup. So a few questions.

  1. Should I abandon my old backups and start over? I don't think that I did nothing to my system in these last days that I would need to be careful, if I couldn't rely on a TM backup from that moment.
  2. Is there a way to get TM to recognize my old backups and start from there? I do not look down the barrel of a backup of time + 13.

  If 1, should I reformat the partition TM in order to start over? I don't see the older backups on disk when I look in the Finder, but I know that they are there and they are too much space. Help/suggestions appreciated!

  Inherit from a backup

  Inherit from a backup (2)