Import from SD card does not store the files on hard drive, but only references to SD card after import.

Similar Questions

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Where XP does not store the file in browser's history?

  Hello everyone, ok so I don't know Vista and Windows 7 stores the browser history in the same place but as on XP?

  Windows 7 it stores here: C:\Users\[USER]\\AppData\Local\Microsoft\Windows\History

  Where XP does not store the browser history? Also what Windows 2000?

  The store of XP in the following folder browser history

  C:\Documents and Settings\utilisateur\Local Settings\Historique

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards

• Tecra M9 - does not recognize the 320 GB HARD drive

  Hello @ all,

  I tried to install the HARD drive, but it seems to be not recognized by the BIOS. Any chance to get this problem resolved?
  With Acronis Disk Man. I get an error message: No. HDD installed!
  BIOS version is 1.80, HARD drive is a Seagate ST9320421ASG (Momentus 7200.3 320).

  Thanks in advance

  Hello!

  Have you tested the HARD drive in a laptop or in an external enclosure? Maybe it s faulty.
  Or you test another HARD drive in this notebook.

  Normally a 320 should work in Tecra M9.
  There is a new version of the BIOS on the Toshiba, but I doubt that the problem of the article, but try to update.

  Good bye

• Where PSE does not store the files on a Mac

  I just installed 10 PSE on my MacBook. I had been using Iphoto'08, but when I bought a new camera, I wanted something more sophisticated to organize my photos and editing and improve their.

  So far, I installed 10 PSE with success and played with him. The Organizer works well and does what I want it to do. My intention is to use Organizer for new photos and leave the "old" about Iphoto for now. However, what I can not function, is where PES stores files on Mac after that I have working on it. It doesn't look like they are back in Iphoto, as I made changes to the photos that do not appear in there.

  Can someone enlighten me on this?

  Yes, that's all. You have now. PSE does not normally create something other than a database entry, not a new file.

• Where PSE Organizer 12 does not store the files in the catalog?

  Where is the default location for the catalog of PES 12 files Organizer?  What are the names of the files that make up the catalog information?

  Bill Junk says:

  Where is the default location for the catalog of PES 12 files Organizer?  What are the names of the files that make up the catalog information?

  In all versions of items, you will find the location of the current catalog with the Help menu file > system information.

  You may need to allow the properties of Windows Explorer to "Show hidden files", given that the catalogues of the default location is hidden by default.

  Each catalog is a folder that contains subfolders and different files.

  The most important of them is the, an sqlite database that we, called catalog.pse12db for PSE12.

  Another important element is the thumb.5.cache which stores the thumbnails.

  Catalogs differ with each version of elements.

• Satellite A55-S106 does not recognize the 160 GB HARD drive

  I replaced the 60 GB IDE HDD in my laptop Toshiba Satellite A55-S106 with a 160 GB one of Western Digital.

  I've restored a Ghost 10 image to the new drive on a hard disk external. The computer still recognizes only 60 GB. Belarc and HD Tune to see a 160 GB drive, but show the volumes as being only 60 GB.

  Disk management Windows show 93,16 GB as unallocated.
  I am running Windows XP SP3.

  Someone at - it ideas? The BIOS can be crippled somehow? I can't find anything in the BIOS that seems to address hard drive size.

  I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow? Here I used the original recovery CD to recover everything first and then restored the Ghost image?

  I put a 160 GB drive in an old 1999 Dell desktop running Windows 98 and no problems like that. It is hard to believe that a laptop from 2005 would have this problem. It is, however, my first attempt at using a version of Ghost Windows hard drive recovery.

  > I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow?

  Yes, I suppose the HARD drive was not formatted in NTFS file format.
  This is why I would recommend booting from original Toshiba Recovery CD and then check if the HARD drive has been recognized correctly!

  Please check first!

• The search in Windows Explorer has stopped working properly - it does not find the files which are there, but will find other files that match the search criteria

  Window 7

  Was working before, but have only allowed a number of updates to Windows that had been blocked for a while.

  For example. Type 'safe' in the search box. It finds files and directories with 'security' in the title, but not the files and directories that I can see are there with 'safe' in the title.

  When I search using the "safe * ' it seems to do exactly the same thing as"safe ".  It does not show only files beginning with 'safe'

  My suggestion was not ' safe * ' but ' name of the file: ~ safe * "(without the quotes).

• my computer does not recognize the WD external hard drive

  I use WD My Book external hard drive in my laptop (Vista) DELL for extra storage space. But all of a sudden I don't see in my computer!

  When I looked at , , info., (in addition to the "OS" & "Recovery") I saw "'unknown disc', so I tried see its properties by right-clicking, then I saw"WD My Book external hard drive"name in it and she said"working properly "; but when I played with it, I must have done something wrong, this name of 'unknown disc' missing from the list in my computer. How can I make my WD get work again?

  Hello

  Thank you for posting.

  I suggest you to contact the manufacturer of the device. They should be able to help you.

  Check out the link

  http://support.wdc.com/?wdc_lang=en

• Vista does not recognize the 640 GB hard drive

  How can I get Windows Vista to recognize my Western Digital 640 GB with 640 GB hard drives instead of 596?

  On Friday, June 11, 2010 21:35:17 + 0000, Freebird-52 wrote:
   
   
  > How can I get Windows Vista to recognize my Western Digital 640 GB with 640 GB hard drives instead of 596?
   
   
   
  Sorry to tell you that everything you have * is * acknowledged. Although
  you think you have a 640 GB drive, you actually have a 596 GB disk.
   
  All drive manufacturers qualify hard 1 GB 1 000 000 000 bytes, while
  the rest of the computer, including the windows world, defines it as 2 to
  the 30th power bytes (1 073 741 824). So is a disk of 640 billion bytes
  actually about 596 GB.
   
  To some people pointed out that the official international standard defines
  the 'G' of GB as 1 billion, not 1 073 741 824. Correct if they
  are, using the binary value of GB is so well established in the
  World of computing that I consider using the decimal value of 1 billion of
  be misleading marketing.
   
  There is more information on this here:
  http://GadgetWise.blogs.nytimes.com/2009/07/06/q-a-decimal-and-binary-measure-vs-measure/?partner=RSS&EMC=RSS
   
  or http://tinyurl.com/m9mv37
   
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Can not read the files on hard drive

  I bought a new computer with Windows 7.  My old computer running Windows XP and has a virus which disabled permanently.  I want to recover the files from the old drive to the new hard disk.  I removed the hard drive from the old computer and put it in the new computer.  The new computer recognized and named E: drive.  However, Windows Explorer shows "this folder is empty".   But when I look at the properties of the drive E:, it shows that the old hard drive is 40% full.  Why is it impossible to see the files in Windows Explorer?  And how can this problem be fixed?

  Hello

  Check out the following and check:
   
  Method 1:
  Run a virus scanner and check:
  Viruses are known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 2:
  Viruses may have hidden files, try the steps in the following link to view it.
  Show hidden files
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files
   
  Hope this information helps.

• Where Flash Player does not store the files on your computer?

  OK, so when you go into the settings of the Flash Player, you can adjust the amount of information a particular site can store on your computer, but where it it stores this information, and you can change this location to a custom location? Thank you.

  The data is in:

  C:\Documents and Settings\ {yourname} \Data aplikací\Macromedia\Flash Flash #SharedObjects\

  where the given aplikaci means something like application or something like that in English.

  I don't know if you can change this location. Perhaps by piracy in the registers.

  o.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• Sony music and album app does not find the files on the device,

  Like new the music app Sony Z5 found all the music on my SD card

  I downloaded now more through music amazon app, but they do not appear in the app sony music. Any ideas how to get new music appears in the application Sony Music?

  Never had this problem with my Xperia Z

  Thank you

  Hello

  I have tired a few things and understand the problem - it's the Amazon app

  1. I opened Commander file and could see the files, but they are stored in a different folder of Android/data/com.amazon.mp3/files/Music. I copied the files in the folder media/Android/media /, then the files are repeatedly maximum and so that works.

  2. / android/data/a a .nomedia file that I deleted, but the file is restored back automatically

  Technically the Amazon app should store the files in/Android/media, but is not