Import image - error 'cannot get all the files for this device. "

Similar Questions

• WerFault.exe - Application error, cannot open all the files.

  Original title: any file does not open

  I am not able to open files, it says

  WerFault.exe - Application error

  The instruction at ox74d7b89a referenced memory at 0x00000008. the memory could not be read.

  Click on ok to terminate the program.

  Hi Dev,

  Were there any hardware or software changes made on the PC before this problem?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  This error can be caused by bad memory or a file system corruption.

  Kindly, follow these methods and check if that helps.

  Method 1:
  Step 1:

  Run the Memory Diagnostic tool.

  Follow the steps to run the Memory Diagnostic tool:
  a.Press Windows key + W on the keyboard and type 'memory' without the quotes.
  b. click on "diagnose your computer memory problems".
  c. Select the recommended option to run the tool.

  Step 2:
  Try to increase the virtual memory and check the issue.

  a. press the Windows key + X, choose Control Panel.
  b. click system and security , and then click on System.

  c. click on Advanced system settings in the right panel.

  d. click on the Advanced tab in the system properties box.

  e. click settings in the Performance section.

  f. click on the Advanced tab in the dialog box.

  g. click on the change button.

  Now, in the virtual memory dialog box, you can change the settings of the file pages.

  h. Delete automatically manage it the swap file and selecting the custom size option to tell Windows to keep the pagefile to a constant size; access to the files is quickier, so Windows has more to resize the pagefile based on the amount of data temporarily stored there. Both size initial and maximum size, enter the recommended size for virtual memory as suggested by Windows (which is usually higher than 5 GB).
  i. Finally click value and then OK three times to close the boxes.

  Mr. Taylor 2:
  If this does not help, Checker (SFC) of file system scan to check if there are any corrupt file system.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Let us know if it helps. If the problem persists, we will be happy to help you.

• Trying to access the camera Pentax Optio S, getting a "the drivers for this device are not installed. (Code 28) »

  Trying to access the photos that are on my camera, not on my drive of camera memory.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  If you use windows7, I suggest you follow the link and check. Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Device Manager error code 28: Troubleshooting

  http://support.Microsoft.com/kb/310123

  Note: Applicable to Windows 7

• Windows XP Office cannot receive all the files from my Windows 7 laptop.

  I have a desktop running WMP 11 on XP and a laptop computer under WMP 12 on Windows 7. Both are connected to the desktop computer even router-, mobile - wireless ethernet.
  Problem is my laptop can receive files that are shared in my office... but my office cannot receive all the files from my laptop, all two media sharing enabled and have all two disabled firewall.

  BTW, I've noticed that my office does not appear on my local network or all networks under "media streaming options" on my laptop...

  original title: the windows media player 12 does not share with WMP 11 (completely)

  Hello

  1 have had modifications made to your computer before the problem occurred?

  2. did you install or uninstall all the programs on your computer until the problem occurred?

  3. do you get an error message or error code when you access or file sharing on the network?

  4. what security (Antivirus & Firewall) program is installed on your computer?

  5. were you able to access shared files and folders on your laptop from your desktop earlier?

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method:

  Sharing files in Windows 7 and XP

  Sharing folders between two Windows 7 machines with the new homegroup feature is an easy process, but the homegroup feature is not compatible with Vista or XP.

  First of all, make sure that both computers are members of the same workgroup which by default is named Workgroup.

  a. on the Windows 7 machine go into control panel-all items in the control panel-network and sharing Center then click on change sharing settings, advanced.

  b. you want to check the following settings under Advanced for home or work and Public profile sharing settings.

  ·         Turn on network discovery.

  ·         Printer sharing and file.

  ·         Turn on sharing so anyone with network access can read write files in public folders.

   

  c. If you want any user to access public actions disable password protection.  It is located in the sharing settings advanced to the bottom of the list (protected by password sharing).

  ·         Turn off password protected sharing.

   

  d. If you want to keep it enabled, make sure that there is a newspaper account that the other XP machine and they have a password.

  e. over on your XP machine open my network places to search for the shared folder of Windows 7.

  f. double-click the shared folder to find a list of shared folders in the folder Public of Windows 7.  If you have password protection enabled you will have to type the user name and password of the user account on the windows 7 machine first.

  Check out the links below and check if this is useful:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Sharing files and printers with different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Hope this information helps you.

• How can I get all the file in a directory name?

  Purpose:

  Try to get all the file in a directory name.

  My code:

  FileConnection fconn = (fileDirectory) Connector.open (FileConnection);
  Listing files = fconn.list ();
  Listing files = fconn.list ("*", true); Try
  _SCREEN.updateDisplay (files); txt shows unreadable.
  String filename = fconn.getName ();
  _SCREEN.updateDisplay1 (fileName); Show WMMS.

  Try using fileconnection.getName (). -->, But fail.

  Could someone give a tip to solve the problem?

  Thank you for your attention,

  You cannot print just an enumeration.
  It is a collection that contains objects, in this case of strings, as you can see on http://www.blackberry.com/developers/docs/7.1.0api/javax/microedition/io/file/FileConnection.html#li...

  You can use a while construct to browse the enum, as:
  While (files.hasMoreElements ()) {}
  System.out.println (files. NextElement());
  }
  (do not know if you do not cast explicitly to a string for sysout, iirc)

• computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how do

  computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how to do it, in simple terms,

  Thank you.

  If by "computer of new beginning" you mean that you have started your recovery or disk restore factory set and reinstalled Windows, then the ability to recover your files is practically zero.  You can try a utility like Recuva (http://www.piriform.com/recuva) but since you have rewritten the entire hard drive, it is highly unlikely that anything will be recoverable.

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  If you have not all panels in the Titler then go and reset the current workspace that is located under the window.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The drivers for this device are not installed. (Code 28) for the ALL-IN-WONDER RADEON 7500

  I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.

  That is, what it does and how can I solve this problem?

  Thanks in advance

  Try to go to this link which is AMD and download the drivers for it.

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.5&product=2.4.1.3.14.3.2&ContentType=GPU+download+detail&OSType=Windows+XP+-+Professional%2fHome&keywords=&items=20

  The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Network adapter 802.11n keeps stalling in Message' no. get error Windows 7 drivers are installed for this device. »

  Original title: 802.11n network adapter keeps dropping out

  My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network.  When I check the network card, he said, "no drivers are installed for this device."  If I try to update the driver, it indicates that the drivers are up to date.  The only way to get the device working properly is to shut down the laptop and restart.  When I do this the device manager says that the network card is working properly.  I looked at other solutions, but none of them seem quite fit.  I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.

  Hello

  According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.

  Please follow the troubleshooting mentioned method below to check if his help.

  Method 1: run the network troubleshooter utility.

  The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:

  1. Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
  2. In the left pane, click View history.
  3. Right click on the troubleshooting report, and then click details.

  If the problem persists, follow the next method.

  Method 2: uninstall and reinstall the network driver.

  Please follow the steps below.

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In Device Manager, look for the network adapter.
  3. Right-click on the adapter and select uninstall.
  4. After uninstalling the network driver restart the driver.

  After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.

  Please follow the below link to download the driver from the manufacturer websites (HP) network.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Error on game controller wireless for My Logitch F710 Xinput mode "the drivers for this device are not installed (Code 28)". "

  Original title: driver for Windows game controller problem

  My Logitch wireless gamepad F710 does not work laptop with my HP Pavilion dv6-6017tx PC Xinput mode (Windows 7 Home Premium 64-bit). But it works very well in mode Dinput. When I have this device in windows in Xinput mode displays an error in the window of the driver in detail which 'the drivers for this device are not installed (Code 28)'. I uninstalled and reinstalled the driver of Logitech software, but the problem is still there.

  I tested this device to a desktop PC (Windows 7 Professional 32-bit), but this PC detects F710 controller using Xinput, working absolutely as planned without any installed driver software, provided by Logitech. In the details of driver in the PC window, it shows that his taking the pilot as "XBOX 360 Controller for Windows" and the driver file is xnacc.sys in system32 folder and when I searched my system32 laptop dv6 folder I found this file is missing and I n, t know why.
  I also tried to control windows search for drivers online, but windows has failed to find it.
  So what should I do now?
  Help, please!

  Thank you very much for the reply.

  I thought about it finally.
  I installed the driver for the controller XBOX 360 for Windows on microsoft's site and installed. Then plugged the device and select the driver manually installation option and wanted Xbox 360 controller for windows driver in the list. Now my controller F710 currently also works well in mode Xinput and Dinput.
  Thank you very much.

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message Officejet Pro 8600 Premium that the drivers for this device are not installed. Code 28

  Printer : Officejet Pro 8600 Premium. model CN577A

  OS : Microsoft Windows 7 Home
  Base-64

  How your product is connected to your PC? : Network

  Description of the problem : in the Device Manager I have an error message with the

  OfficeJet pro 8600 icon - "the drivers for this device are not installed.

  (Code 28)

  There is no driver selected for the item or a set of device information. "I have

  have uninstalled and reinstalled the driver without result. The printer

  seems to work fine.

  Hello

  Yes, I would also suggest a new re-installation of the software.

• Error code 28 'the drivers for this device are not installed' for Seagate ST905004EXA101 - RK 500 GB hard drive.

  Original title: Windows7 does not recognise seagate expansion drive.

  Expansion drive model: ST905004EXA101 - RK Seagate 500 GB

  Microsoft Windows 7 website says that it is supported.

  The drive works in another laptop with Windows XP.

  Try installing in another laptop with Windows 7 Enterprise SP1.

  In Device Manager, I get a message "the drivers for this device are not installed. (Code 28) »

  Hi PinakiDeb,

  You can follow this link & check if the problem persists.

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201235&NewLang=en.------

  Hope the helps of information.
  Please post back and we do know.