Import JPEG files are corrupt

Similar Questions

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• I get this message on my desktop - the Setup files are corrupted. You can get a new copy of the program.

  "The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
  Thanks Jim

  Original title: the Setup files are corrupted

  Hello

   
   
  1. What is the full/exact error message?
  2. When you receive this error message?
   
   
  Follow the steps.
   
   
  Method 1
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
   
   
  Step 1
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
   
  Step 2
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
   
  Perform the virus scan and make sure that your computer is virus-free.
  
   
  Method 2:
  Run Microsoft Online Scanner.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
   
  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.
   
  Also run a scan complete with Microsoft Security Essentials, check out the link.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
   

  For further assistance, post back with display of the event logs. Check out the link.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Response with more information to help you.

• Satellite X 200: Toshiba Vista value-added download Pack - files are corrupted

  I downloaded the valuespack severaltimes for my Satellite x 200.
  By extracting, I get a corrupted message that the files are corrupt.

  What is the problem with the file?

  THX

  I can't believe this. The same version is available for several models of different laptops, and of course, you're the only one with this problem. I recommend you use a download manager. Try again.

• Satellite M300 - driver downloaded, the files are corrupted

  Hi all

  I have a Satellite M300 when working there, I bought in Asia.

  HARD drive died and had to be replaced with the nightmare of normal to find drivers, the main problem being the only site that recognizes the model number - PSMD4L Toshiba Asia. Unfortunately the dosent work section download drivers, I tried from different places, different computers etc. but all of the download files are corrupted and there is noway contact Toshiba Asia!

  Frankly I'm amazed that a company like Toshiba doesn't have a handle on all the models produced around the world + support for drivers simply incredible!

  How can anyway sorry yell someone has any suggestions, I get the drivers?

  Cheers for any help

  Rich

  Why do you think that the drivers are corrupt?
  Did you receive any error messages? If Yes, which?

  What drivers did you tried to install?
  What operating system do you use?

• The script files are corrupted in vista on my computer laptop r61i

  Technical support of McAfee said that my scripts files are corrupted in vista on my computer r61i laptop... How can I download and replace on a preinstalled OS

  * original title - scripts to repair files in thinkpad r61i of vista preinstalled v

  Hello DonSchaffer,

  1 script are. what files you referring?

  2. What are the problems you are having with the computer?

  3. are you referring to the file damaged desktop system?

  Please give us more information about the files that you are talking about and the issues you have with the computer. If the system files are corrupted on the computer, I suggest that you run the tool on the computer system file checker. You can check the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Message: 'Ehtray' under the (x 86) HP program files are corrupted and unreadable, run chkdisk utility

  Original title: corrupt files and running chkdisk utility

  I get a message (with the yellow triangle) that "ehtray' under the (x 86) HP program files are corrupted and unreadable and run chkdisk.  I do not know how to run the chkdsk utility, but by running AVAST on the HP (x 86) program I have ID had two "unreadable" files, but cannot delete them.  It first appeared when I installed Webshots Desktop on my laptop, but when I tried to uninstall it, it wouldn't uninstall.  My PC just guard close after having been just a short time, so I need to figure this out!  Any help would be appreciated!

  Hi mama mia,.

  1. What is the name of the HP program?

  Try these steps and check the result.
  Step 1: Restore the computer to an earlier time when it was working fine
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.

  See What is system restore?

  Step 2: If the problem persists, then reinstall the HP program and check the result.

  You can get in touch with HP Support team for more help on the HP program.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why direct Director said suddenly that my files are corrupt? error 0 x 80070057

  I am able to add trim, split and change all my movie files .avi to randomly Live Movie Maker decides that half of my files are corrupt suddenly and must be removed or I can't even save a project.

  I am using lawless videos and trimming / splitting into smaller files, but it is not just happeneing to files that I changed, it's extremely random. All the files that I use is from the same destination, my SD card in my camera. Do not have problems with the map or the files in any other program.

  :/

  Hello

  The question you have posted is related to Windows Live Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The installation files are corrupted. You can buy a new copy of the program

  Whenever I try to install a new software or games and then permanently in error "the Setup files are corrupted. You can get a new copy of the program.

  Please help me...

  first scan your computer entirely with good antivirus.

• All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

  Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

  You can restart your pc and reconnect the ext hdd.

  Recuva Piriform is a free data recovery program.

  Google for more solutions

• Can not install downloaded 12 elements files are corrupt

  This time is costing me more than the cost of the program.  I spent hours to uninstall Photoshop elements 12, installation of Photoshop Elements 10, then my first 12 items was corrupt so I downloaded the installed after cutting in my Adobe, now it will be installed not and says that the files are corrupt.  I need to get this program on my computer, please.

  Windows 8, i7 processor, 16 GB of RDRAM, 3 GB memory graphics, internet access, problems of any assistance from Adobe.

  Hi timmyleeturner,

  Do you have any antivirus, firewall, or other security software installed on the machine?

  If Yes, then please try turn them off and re-download the software from the link below.

  http://www.Adobe.com/UK/downloads/other-downloads.html

  Also check the size of the installer on the website and on your machine.

  Kind regards

  Anand

• Problems with importing photos using Windows - Photo files are corrupted in the Gallery windows

  I use Windows to import images from my camera (Canon Rebel EOS) to the computer (HP) and display them in the Windows Photo Gallery.  Recently, the photos in the Gallery become corrupt once downloaded, which means they download fine then when I open "Images" to see in the Gallery, they photos each are corrupted with ribbons of various colors, or the image is cut into strips to compensate.  It didn't happen when I uploaded the same photo files to another computer so I know that is not the fault of the camera or individual files.  I scanned for a virus (I use AVAST).  Can I fix this, or is there any other software I should use to download files?  I'm just a MOM ol ' ordinary looking to transfer the zillions of photos that I take my children.  Help!

  Hello

  Welcome to the Microsoft Answers community.

  Try to rebuild the database of photo gallery that should remove corrupted files that could cause this problem. Do follow the steps mentioned below.

  Photo of C:\Users\[username]\AppData\Local\Microsoft\Windows

  Gallery\Pictures.PD4

  Rename the file Pictures.Pd4 to Pcitures.Pd4.old

  Retstart the photogallery program check what is happening.

  Run a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning

  Anthony.

• Backup did not run on a laptop before be recreated now the files are corrupted after recovering the data.

  I ran a data recovery software that has found a lot of the loss of the files but the files are now corrupted. It is very important for these files restored to their original condition and work. Have tried many files repair software, coding and a simple fix with the "Open and repair" feature in XP. What would be the last result and hopfully more here on success?

  I'm afraid that you have learned a painful lesson about the importance of backing up your system.  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is about $90 these days and a very good FREE backup program is the Easeus todo backup free that you can download from
  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Lightroom CC / 6: problem with importing JPEG files!

  Just installed Lightroom CC (6) the trial created a catalog, added to an existing folder, and this is what I have observed.

  • Each photo shoot folder contains two folders: Original (DNG) and shared (JPEG format)
  • Original DNG all have exactly the same thing. But shared JPEG images are not get imported properly. Even the [Reset] button fails to resolve all the sliders to 0. And once I have manually set all sliders to 0, then the picture looks very good. Check this IMAGE.
  • When importing, I made sure that no default develop settings have been selected. 'None' was the option chosen for all the options that are available.

  I guess the problem is, some develop parameters get automatically applied to image (JPEG) without meaning to, and this is why the [Reset] button fails to do what it is supposed to do!

  Anyone else having this problem? OR I'm doing something wrong here?

  You may need to disable the Auto apply toning in LR Prefs:

  

  Otherwise, the parameters already can be incorporated into the files JPG to reimport cannot help.  Back to zero must change the values to what are your current default settings in LR.

• How to import JPEG files at 100 dpi?

  The basic layer of my film is a jpeg at 100 dpi. When I import into the scene, Flash converts it to 72 dpi, which makes all too small. I use Flash MX. Later versions of Flash are supported 100 dpi and if so, which? If not, what can I do?

  After importation, open the transformation Panel where you can see that they are one percentage other than
  100% in size. Just type in 100%.

  Chris Georgenes
  Adobe Community Expert
  www.Mudbubble.com
  www.keyframer.com
  www.howtocheatinflash.com

  amay0_0 wrote:
  > These JPEG files is in the pages of web comics (for example,
  (> http://talismenseries.com/d/20050702.html), and they are drawn and displayed on
  > 100 dpi. For example, save the file on the web, open it in Photoshop, and
  > you will see the dpi is 100. Display the jpeg format in an html file, and it will retain
  > its correct size of 580 X 900. But importing it into Flash and Flash it will shrink
  > to 417,6 X 648.
  >
  > I do not sound of these JPEG files, and they are unusable in a different size.
  >
  > Allegra
  >