Import of a simulation system on captivate in a model on a different project in captivate

Similar Questions

• Imported SWFs retain their ActionScript in Captivate?

  If I do a 'Import-> Animation' to add a SWF file to a slide in my Captivate3 project, actionscript that sovereign funds will work properly? As, if I load the published captivate different SWF in a main SWF of Flash (using "loadMovie", for example), will be the sovereign wealth funds that have been imported in the Captivate project can refer to the main Flash SWF using '_root '?...
  
  Thank you!
  
  

  Yeap, sure they do, but do not work your references '_root' likely
  as you put a SWF file within a SWF file (who is also probably compiled inside
  a SWF file). Note a post more soon where the fix was to precede functions
  with something like four prefixes ._root...
  I have no idea if loadMovie still works, but can't hurt to try.
  Erik

  DIY_Lobotomy wrote:
  > If I do an 'import---> Animation' to add a SWF file to a slide of my Captivate3
  > the project, will be that the SWF actionscript still works correctly? As, if I load
  > publishing captivate SWF in a main SWF Flash (using "loadMovie", different
  (> for example), will any SWFs that were imported in the Captivate project be
  > able to reference the main Flash SWF using '_root '?...
  >
  > Thank you!
  >
  >
  >

  --
  Erik Lord
  http://www.capemedia.NET
  Adobe Community Expert - Authorware
  http://www.Adobe.com/communities/experts/
  ------------------------------------------------------------------------
  http://www.awaretips.net - samples, tips, products, FAQ, and links.
  * Search A newsgroup archives'ware *.
  http://groups.Google.com/group/Macromedia.Authorware

• I tried to import my vcard to icloud, which is in format .vcf. It is projection 300 contacts could not be imported because there was a problem to read. What should I do to import them.

  I tried to import my vcard to icloud, which is in format .vcf. It is projection 300 contacts could not be imported because there was a problem to read. What should I do to import them.

  You could try to export your contacts into smaller groups

• R50 update system-Machine type and wrong model

  
  

  Hello

  the Bios Update Utillity is able to rewrite your model number and machining to the Bios.

  Download from the Lenovo support site burn to disk and start. Then a dialog appears on the screen and

  your power to correct your issue.

  Maybe that update system will recognize the right model and the number of the machine.

  welcome them

• My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  Use a can of compressed air in the opposite direction of the normal airflow with the machine off.

• Captivate 5: problems with Scripts Java - try to jump to a certain slides on different projects

  I have the code here I did searches for Captivate 5 access certain slide in a different project, this code has attempted to use in projects separately and simultaneously:

  function GetSlideParam() {}
  If (Window.Location.href.IndexOf('?) Slide =')! = -1) {}
  startIndex var = window.location.href.indexOf ('? = slide') + 7;
  var URL = window.location.href.toString ();
  var slideNumber = URL.substring (startIndex);
  
  If (slideNumber! = "| slideNumber! = undefined) {}
  setTimeout (function () {NavigateToSlide (slideNumber)}; 200);
  }

  }
  }

  function NavigateToSlide (requestedSlide) {}
  cpObj = document var. Captivate;
  cpObj.cpEISetValue ('cpCmndGotoSlide', requestedSlide - 1);
  cpObj.cpEISetValue('rdcmndResume',1);
  }

  GetSlideParam();

  Here is my file of URL success on in the properties of the button that was required to access some slides according to my research:

  (my project to move to) .htm? slide = 2

  Ultimately, he did not and just jump to slide 1 on the other project, no matter what I tried to do it or how I modified the script and properties button and drag the project... Help, please... Just thought that maybe you guys would know some scripts, it's why I ask you guys that no matter whether it's a Captivate because specialists Captivate couldn't answer my question being clueless on the script of this part.

  There is no 'secret code '. All is in your NavigateToSlide service management, and apply some logic. (The Javascript logic, to be precise.)

  The class variable is of type "string" , and I am 100% sure of this because you use the function 'substring' to create his argument. I know that because "substring" will always return a string, even when you give him a Boolean or integer (in these cases, it will return an empty string, but it is always a string - a little as the number 0 may represent "nothing at all", but it is always a number).

  Look in the NaviatgeToSLide function. What happens when you subtract 1 from one channel? ... UH. It depends on the language, really. Most of the languages report it as an error, but Javascript does not work (for a variety of reasons - if this bothers you, use Google to find out why).

  Now, assuming that the variable 'requestedSlide' contains a valid slide number and it is stored as a string, how you converting cela a real number? Using a pretty basic Javascript function, in fact:

  cpObj.cpEISetValue('cpCmndGotoSlide',parseInt(requestedSlide) - 1);
  

  Needless to say that I'm not 100% sure that this will fix the problem, because I can not test your code using InDesign.

• Import of MS Powerpoint slides to Captivate

  Anyone know why I cannot import MS Powerpoint slides in Captivate? The option is out ghost under file > import > PowerPoint presentation. I'm building a sensitive project classroom and tried to import a Content Slide that I formatted with a style of master. As a work around, since there are only two PowerPoint slides, I opened in Adobe Photoshop and turned them into jpg. Then I have those in my slide of content placed side by side. Two bad that I can't manage to put a Powerpoint presentation that would leap upward in a separate window. PS. There are things on Captivate that seem really basic to me, but I want to make a more robust program. Thank you!

  Please use PNG, not with JPEG compression if you want quality. I would NEVER start a PPT for a sensitive project (and rarely for an empty project). A great presentation tool is not a tool of e-Learning good, certainly not if your focus is on mobile devices.

  I wanted to add that if you still want to import PPT-Slides into a normal (empty) project, you can use a custom slide template. Import PPT will always need the blank slide that must be empty (except for background color later). That Blank Master slide is also necessary for any simulation software.

  It is not only for the conversion to the SWF format that you can not import PPT into a sensitive project, but also because every PPT slide has a fixed resolution, projects of nature reactive need to have a dynamic resolution, as well for the slides and objects. It's one of the reasons for the Panel properties of Position is so important for projects of a reactive nature, and the leaders have a default value of % instead of pixels.

• Installer Linux b1165nfw modify important files, damage the system

  Hello friends and Dell!

  First of all, thanks for the offer of linux drivers, it's really appreciated, and I would not have gotten this camera if they were not available.

  However, the installer of linux for pilots makes a few very strange changes of important system files, which made my computer unusable, far as I can tell to be a mistake, then I sincerely hope that one of your representatives may send this message to the one who is responsible.

  Specifically, after the download of the driver here: http://www.dell.com/support/drivers/us/en/19/product/dell-b1165nfw , I ran the autorun program, and of course, I had to give him Admin privileges and clicked with success by. He changed the owner of the folder/usr 8070:9999 (where it should be root: root), and which is a very important issue, beat many other programs (such as virtualbox). There were several other cases that have this permission changed: / usr/lib and a few files lib on this issue which I do not remember the name (something like libtty).  He also created a vacuum/Desktop folder to the root! If something very strange is happening with the program.

  Please have them take a look at this, because according to the skill level of the user, it can wreak havoc on their system. In my attempts to fix it, I made a typo and ended up having to do a complete reinstallation of my system! I was running Ubuntu 12.04, and then I installed 14.04, revived the program, because I had nothing to lose and found the same behavior. I know I'm not the only one, here's at least someone else having the same problem:

  http://wyldeplayground.NET/usr-folder-permissions-being-changed-to-8070-9999-breaking-VirtualBox/

  Hope to hear from someone soon!

  Dan

  This is what worked for me to get the ability to print in Ubuntu 14.04. These aren't the most extensive instructions, I'm tired, so I apologize. I hope this will help you get started, please keep in mind that I am no expert so follow at your own risk. This assumes that you have already installed cups (it comes pre-installed with most distributions).

  Includes the following: download the Unified Driver Dell, moving some files and adding the printer via application printers of Ubuntu.

  1. download the universal driver of Dell on the link in my first post and unzip the files (in Ubuntu, you could double-click on and click on extract), which should give you a folder named cdroot, I will refer to this folder across.

  DO NOT run the installation script. As mentioned above, it's disastrous things, and judging by the response of Dell to this post (none), they are able to send email to a person who cares little interest.

  2. I had started going to the printers Ubuntu app, and he told me that it won't work without 'rastertospl' being installed. If you have a 32-bit installation, this file is located in cdroot/Linux/x86_64 if you have a 64-bit installation and cdroot/Linux/i386. You need to copy in/usr/lib/cups/filter and make sure it is executable, and sudo privileges are required to do. Claiming that you have extracted the Dell installation package to your desktop, orders of the terminal would be these for a 64-bit system:

  sudo cp ~/Desktop/cdroot/Linux/x86_64/rastertospl/usr/lib/cups/filter

  (Check if it is already executable, then tell - rwxr-xr-x to the left after you run the following command. Note the s in 'x'):

  ls-l/usr/lib/cups/filter | grep rastertospl
   
  If there are not three x as described above, run this:

  sudo chmod + x/usr/lib/cups/filter/rastertospl

  After you run the program rastertospl (thanks to Olivier at the second link below for the tip), the program shows that we need the libscmssc.so library. He finds himself cdroot/Linux/x86_64 or cdroot/Linux/i386. To copy in the file/usr/lib and again make sure it is executable:

  sudo cp ~/Desktop/cdroot/Linux/x86_64/libscmss.so/usr/lib
  (if needed :))
  sudo chmod + x /usr/lib/libscmss.so

  3. I went to app printers of Ubuntu in the settings (System settings > printers) and click Add.

  (I had already configured the printer on my network, so I was able to search for and select, if all goes well it shows for you.) When the drivers could not be found for the printer (do not take the generic, it won't work), it gives you an option to add a PPD file. The b1165nfw.ppd file is in cdroot/Linux/noarch/at_opt/share/PPD. I sailed from the app to printers.

  After that, the impression has worked for me. It does not scan. Who will have to wait another day.

  Thanks to these sources to fill the gaps in my knowledge:

  https://wiki.archlinux.org/index.php/Samsung_ML-2245
  http://blog.Cochard.me/2012/01/installing-Samsung-ML-2950-series.html

  Dell, up to present very little thanks to you. This will probably be the last piece of Dell hardware, I buy. It's one thing to have something does not and one something else quite make an installer that damages people computers. I know that Linux is not a large market, but a simple answer would have been decent.

• IMPDP - loading data import process in the SYSTEM. ERR$ DPnnnnnnnn - is - this?

  Environment:

  
  

  Oracle 11.2.0.3 EE on Solaris

  
  

  When you run a data pump import in an existing schema, the process is stopped with:

  
  

  ORA-39171: job knows a wait can be resumed.

  ORA-01653: unable to extend the SYSTEM table. ERR$ DP010704470001 by 8192 in the SYSTEM tablespace

  I searched this error message in the documentation and the web and MOS, but so far, came the voids.

  
  

  I know that the input data have some inside LOB columns, but I loaded previously in other schemas in the database.

  
  

  This entry dumpfile is a bit bigger than the previous ones, but I didn't think that would matter.

  
  

  The SYSTEM tablespace has currently 4 GB allocated that is obviously much larger than normally necessary.

  
  

  I tried to import metadata only, disabling all triggers because I thought they were the cause of the problem, and then loading the data, but the result was the same.

  
  

  Any help is greatly appreciated!

  
  

  -gary
  

  Hi Gary,.

  It's just a simple case of the execution of the SYSTEM tablespace out of room by the look of it - you must be

  (1) add more space

  (2) stop task and re - run as another user who does not have the default tablespace of the system

  I'm not 100% sure what the table is that datapump creates (it is not the normal main table which is quite small) but I think it's probably to be created (and full) If you use the skip_constrant_errors parameter that records all lines that could not be loaded because of violations of constraints - if it is a large amount of data, omitting the table would get large enough.

  See you soon,.

  Rich

• Import Power Point presentation to 9 Captivate (mac user).  Cannot change the slides. Please notify.

  On a Mac, I imported a Power Point presentation to 9 Captivate.  I would like to edit and add effects.  At this stage I can't edit any PPT Slides.   Could someone advise me. Thank you.

  That depends: do you need to publish projects responsive or normal?

  A theme in Captivate is made (and I recommend this sequence) of all the styles object (including settings of default styles, the States of the buttons and the form buttons, settings for views of breakpoint in the case of projects of reactive), master slides (which will use object styles) and skin. Each theme can also switch to another palette of theme colors. I just blogged about the color scheme, which can also be used in different training Interactions. Most of the books/training just touch this topic very sparingly or omit, that I do not understand. I have printing is bound to have a book out very quickly, and the writers/trainers are not not developers.

• LCM - artifact of import to the file system without using a source application

  Hi all

  I would like to ask if I can import the objects in the file system in SSP without the source application, I have the source file: XML (which contains the resources folder: configuration, type of plan, artifacts global relational "Data.xml") and record information: registration, sourceinfo.xml) which was taken from an application that no longer exists!

  How could we do?

  Thanks in advance

  Kind regards

  1003344 wrote:

  Thank you for your reply, I tried to put the folder under what but I can't see them yet! I also tried tried to put the. XML directly under what files but I still don't see the sub file system

  do I need to restart the server?

  Kind regards

  If you put the files and the folder structure in place then there is no need to restart and it should pick it up, if the structure is incorrect, so he will not pick it up, might be interesting to try an export of test on a different application or a system to get an idea of what files you need.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Import a third-party SCO in Captivate presentation

  It is possible to import a SCO is created in another program (my specific need is Question Writer) in a Captivate file? And if the import is possible, the fact keep intact reporting?

  No, it is not possible to import the SCO into a Captivate CPTX project file.  However, it would be possible to pack the other SCO with a SCO Captivate as part of a multi-SCORM course.  However, everything works well with the LMS inside the SCO manifest details must be oriented so that the XML data that they showed both belonged to the same course.

  You might be able to use a tool such as RELOAD Editor (Google it) to group them together.

  No guarantee if...

• 4.01 bug? Application to import, change of authorisation system

  Not sure if this is a bug or intended behavior (can not imagine that it would be however).
  
  I create the authorisation scheme: IS_OTHER
  
  On a number of pages I says the system of authorisation page as: {NOT IS_OTHER}
  
  Export the application.
  
  Import the application (in another instance). -See response. is not serious if important in the same instance, workspace, etc. result will be the same.
  
  Pages where I've specified {NOT IS_OTHER} changed to IS_OTHER... :/
  
  Thank you
  Trent
  
  Published by: trent on November 25, 2010 16:11
  
  Version: 4.0.1.00.03
  
  Published by: trent on November 25, 2010 17:48
  
  Ok.. simply by looking at the export of the application where the authorisation scheme is specified as {NOT IS_OTHER}
  
  authorisation system
  

  wwv_flow_api.create_security_scheme (

  p_id = > 5429403637109682 + wwv_flow_api.g_id_offset,)
  p_flow_id = > wwv_flow.g_flow_id,
  p_name = > "IS_OTHER"
  p_scheme_type = > 'EXISTS. "
  p_scheme = > ' select 1' | Chr (10) |
  "to staff_authorisations" | Chr (10) |
  ' where upper (user_name) = upper(:APP_USER)', '.
  p_caching = > 'BY_USER_BY_PAGE_VIEW ',.
  p_error_message = > 'You are not authorized to view this page.'); >
  
  and one of the definitions of the page
  

  wwv_flow_api.create_page (

  p_flow_id = > wwv_flow.g_flow_id)
  p_id = > 27
  , p_tab_set = > 'T_MAIN '.
  , p_name = > 'new '.
  , p_step_title = > 'new '.
  , p_allow_duplicate_submissions = > 'Y '.
  , p_step_sub_title_type = > 'TEXT_WITH_SUBSTITUTIONS '.
  , p_first_item = > 'NO_FIRST_ITEM '.
  , p_include_apex_css_js_yn = > 'Y '.
  , p_autocomplete_on_off = > 'ON '.
  , * p_required_role = 5429403637109682 > + wwv_flow_api.g_id_offset*
  , p_page_is_public_y_n = > ' don't
  , p_protection_level = > ' don't
  , p_cache_page_yn = > ' don't
  p_cache_timeout_seconds = > 21600
  , p_cache_by_user_yn = > ' don't
  , p_last_updated_by = > 'trent '.
  , p_last_upd_yyyymmddhh24miss = > '20101105111436'
  );
  NULL; >
  
  It seems that the IDs are the same, it should be somehow Conversely (unless I'm missing something)?
  
  This seems to be a bit of an epic bug. Like, I could have any number NOT specified permissions < authorization scheme name > and she will be back to the non-inverse version of the schema
  
  ... to test

  Documented under fixed 4.0.2.00.06 Patch Set:

  10119451 export application with using the authentication scheme 'NO', 'NO' is lost when you import

• Oracle Designer Import - lack of application systems

  Hello
  
  I am trying to import an Oracle Designer data model in SQL Developer Data Model 3.0, I downloaded today. I think I have my connection to the repository Designer set up OK and I can choose activities unversioned. When I click on any of my application systems will be shown. The release of Oracle Designer is 9.0.4.6.19 and the DBMS is version 10.2.0.4. Any suggestions as to what I'm missing, greatly appreciated.
  
  Ian

  Hi Ian,

  We have released ai2. You can try import again. I hope that it will help now.

  Thank you
  Philippe

• Could not import the files to/System/Library

  I am trying to download files to the library of patch of Quartz, but the files copy to the folder. When I try to drag and drop the file appears with a grey symbol "cannot complete this action".

  Is this a permissions problem?

  El Capitan running on an end of 2012 13 MBP retina.

  Is this a permissions problem?

  Sort of. It's probably the integrity of system of Protection (SIP) preventing rogue of hacking of the system processes.

  If you really think you need to change the system, disable SIP, make the changes, and then re - activate the SIP.