Could not import the files to/System/Library

Similar Questions

• Could not import the file .aec

  After doing a project and making it in Cinema 4 d, after that I tried to import the file, but nothing happened, the composition did not appear.

  Cinema 4 d rendering parameters: screenshot by Lightshot

  My system properties: screenshot by Lightshot

  Thanks for the help

  If you want to import a file of C4D, you have two choices: use Cineware to import a file of C4D (so using AE to make) or install the correct plugins of Maxon to import a FAC with camera, light, object null info and all your C4D rendered files.

  How to use Cineware: Details of CINEMA 4 d with After Effects integration

  Here's where to find the AEC-opening plugin: MAXON: 3D FOR THE REAL WORLD: Plugins

• Could not import the file-sez already imported

  I was going through some old photos and cannot find this file in LR. The file is located in my pictures folder, but when I try to import it said LR already imported sound, but the folder is not displayed in LR.

  OK, I deleted the folder LR, unplugged the backup. As I type, it is important now to my drive C. Detective Conan.

• Could not import the file xvid .avi with Premiere elements 11

  I just bought 11 first, and it won't import a xvid .avi file. The codec is installed, such as reported by G-Spot. And the file is important to Win Movie Maker very well. No known here problem?

  Thank you

  Unfortunately, pre cannot change with all the CODECS and especially delivery only the CODEC, such as DivX and Xvid.

  Some users have had good luck with importing and editing very latest versions of these CODECS, in the latest versions of PrE, but this is rare. Generally, the file will not import, but if this is the case, then there are usually Audio with no video or the video is so bad, they are not not useful.

  For more information about CODECS, in general, see this FAQ entry: http://forums.adobe.com/thread/546811?tstart=0

  For Xvid or DivX, I convert it to DV - AVI, and then import this file converted for editing. In my case, I use a previous shareware, DigitalMedia Converter 2.7 program. Now there are newer versions of DMC.

  Some users report such CyberLink PowerDirector and Magix MovieEdit Pro do a better job with the Xvid and DivX CODEC, but none is perfect.

  Good luck

  Hunt

• Could not import the file of .mbox mail

  Hi, I was wondering of someone could advise me.

  Ive done just a clean installation of el capitan, and my e-mail account is now set up as imap instead of pop. Everything is good. But on my old messaging system had a structure of production "on my Mac".

  These folders and emails are very important and I expect to be able to import any just them but no.

  Ive tried all methods I know, Apple Mail import does nothing, as the mbox said there is no valid mbox file. Ive checked permissions, I have removed from the index of the envelope and allow it to rebuild. Ive tried even import in Thunderbird, in order to export it again (which worked)

  Ive put the mbox file in the correct directory in the Library/Mail and rebuild the index again. Still no.

  Can anyone help please. Its very important and I had try too long today.

  Thank you

  David Jones

  You select Apple Mail as the import format, mbox.

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Import error "some operations not carried out. Could not copy the file to the location requested.

  I have the demo version of LR. I imported the pictures that were on my hard drive. Now, I can't import more photos when I want to add new ones. I get a screen that says that some operations have not been performed. Could not copy the file to the location requested.

  Help, please. I don't know what else to try.

  If these images are already on your hard drive, you must use the Add option.

  If they are on a USB key and you want to copy them to your hard drive during import, then the Destination you have select this option to copy them doesn't have the appropriate permissions for your user name. , Select a different Destination or change the permissions on the folder that you selected.

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• could not clean the file history data element not found in windows 8

  My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file.  The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

  Hey Daley,

  If there are errors in your player in the history of the files that need to be repaired, try to repair your disk

  1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.

  2. Tap or click repair.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference:

  What happens if something is wrong in the history of the files?

  Please post back with more information and the status of the issue.