Import Power Point presentation to 9 Captivate (mac user).  Cannot change the slides. Please notify.

Similar Questions

• Import Power Point presentations to the Prime Minister

  One thing that would be very useful would be a program of the importer, which allows presentations Power Point of peoples to be imported into an editing tool. I use CS3, XP SP 3.  on a Quad Core 3 G systems.

  I shoot a lot of conference presentations, with three cameras. Two on tripod and one end and striking detail, the other almost a locked off scale, which includes the large projection screen. and a JVC HDD camera running, I transfer tape.

  Short to get a full mixer of mink and a crew for the man, mix and make audio, the easiest way is to get the power of the speaker point thereafter. Obviuously any video they use is no problem.

  BUT, short completely re-doing the Point of power in Photoshop and create a jpeg file for each image used in the outlet, ther must be a program to convert these lines in a format that the Prime Minister will use.

  Any comment is appreciated.

  The best thing to do if you have access to Windows 7 or Windows, you can switch to the 2016 office and PowerPoint has the ability to export a stack as a MPG4 video or WMV video.

  Mario

• Install so that other accounts of Mac users cannot see the software

  I just performed a clean update of my MBP to El Capitan. With this new facility, I create for my various activities separate user accounts (designer, programmer, games, etc.). I do this to other activities (particularly the programmer) sandbox as well to reduce clutter and distractions when engaged in an activity or another.

  I wish I could install Adobe Creative cloud while at least installed applications are not visible to other users and also ideally CCManager bug in the menu bar is not visible (for other user accounts).

  Already tried to pass files to / applications and / library in ~/Applications and ~ / library, changed paths in corresponding plists and re-aliasing files. I continue to rate something, because I break the installation. It's obvious, I suppose, but I think out of the box. Did someone know a way? I missed a FAQ / tutorial for this? No matter what other free thinkers? Any official response?

  Thank you

  Bret

  Creative cloud desktop application can only be installed on the main drive, however, you can change the installation path for other applications. Launch creative cloud application, go to preference > creative cloud > Apps and change the installation from there. I hope this helps.

  If you don't want icon creative cloud on the menu bar, there are two thing that can help, if it is not running another way is to use: CC help | Uninstall the creative desktop application Cloud

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Cannot change the power state of VM: cannot...   (VMWare Workstation 7 on Debian Lenny)

  Hi all, I am new to this community. I recently installed VMWare Workstation 7 on a Debian Lenny (kernel 2.6.26.2 - amd64). I had no problem with it, but when I tried to start a Virtual Machine Windows Vista, which I created it, does not start. Error says windows "cannot change the power state of VM: could not find a peer valid to connect to". "" Any idea, please?

  Josber.

  It seems that the virtual machine has been suspended when your host is using a different screen resolution

  either change back to the resolution that you used when you suspenmded the machine virtual or delete the VMS.

  This will force the VM to do a cold boot

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Power Point presentation on the projector question

  Movies do not play on the screen, even though the animations and static slides show perfectly and at the same time
  on the screen of the computer laptop and projector.

  If I switch to "CRT" only, movies play correctly on the projection screen but the image disappears
  of the laptop. Y at - it a cure for this? (Never happened with my laptop older!)

  Hello

  I studied diligently in the internet and found some answers.
  It seems that Windows with directx is able to show the power point on a single screen presentation.
  I think you should check and activate the Overlay settings on this screen.
  Then it should work on both; screen and projector.

• You cannot change the settings of my Toshiba Power Management

  Cannot change settings in my power toshiba management section... can someone help me?

  Hi Matt

  I want to help you, but first of all, it would be very interesting to know the name of your unit.
  However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

  Good bye

• Cannot change the brightness of the display under power plan settings

  After you install all the updates from lenovo updater, I lost the ability to change the brightness in power powerplan and lenovo vista Manager. I can always change the brightness screen with FN + home/end.

  Help please!

  Here's a picture: http://img209.imageshack.us/my.php?image=24475922zk8.jpg

  solved.
  needed to update the graphics driver after the installation of vista sp1.

• Cannot change the video presentation of telepresence

  When I join a telepresence SX20 one of our WebEx MeetingCenter conferences, we are unable to choose a layout on the SX20. It uses only the small size main speaker (or split screen), with the film strip separate from participants on the lower 25% of the screen. We can press 2 on the remote SX20, or end camera control allows you to select a new layout (it highlights blue), but it never goes to this provision.

  Is there an option in MeetingCenter that blocks the layout to the participants of telepresence? I can't found.

  Am I missing some config somewhere?

  Thank you

  Tony

  Video endpoints will always see participants WebEx within one component, and that they see is based on which is the active speaker, however other connected video settings will be visible within their own separate streams.  You can change the layout of the endpoint using DTMF (2 and 8) or FECC, but the layout changes will only see if you have more than one point of video endpoints connected to the meeting of cloud of CMR.  The control of the layout with the content on the screen, it seems that this provision is fixed and cannot be changed.

• Win LR 6.4 import/Add - cannot change the destination of the catalogue

  Using LR 6.4 and has several hard drives installed on my desktop computer.  LR (.lrcat) catalogs are on the G drive - and have always been on the G drive.  LR and Photoshop are also installed on drive G.  My photos are in the folders on the F drive.  My two catalogues are given due recognition in the preferences as being on drive G.

  When I use the import - Add command, LR allows me to choose the source, but immediately chooses the destination as "My catalog" C drive.  Although there is a small box next to the C drive, it is unusable and I can't find a way to change the destination.  If I use other commands such as copy, I am able to change the destination.  But whenever I load photos from a disc, I have for them to make a folder on the F drive and copy them from the disk to the new folder.  Then, I want to add these pictures to the catalog that is currently active.  I want to add them without moving... l

  I did a search for .lrcat and all the catalogs were on drive G, as they are supposed to be.  However, there is an entry on the C drive that is marked as a MS Word file and it is called: Lightroom assessment.docx.  A paragraph seemed more likely guilty, but I don't know if I should change it and if so, what to change:

  The application folder: G:\Program Adobe Lightroom

  Library path: G:\Lightroom Backups\June2015\June2015.lrcat

  \Adobe\Lightroom

  Settings folder: C:\Users\mg\AppData\Roaming

  Thanks for any help or suggestions.  Is to make the process even very frustrating catalog help

  No matter that one of your hard drives, the catalog is on. If this catalog is one that is active, then it is one which will contain references to imported pictures. When you use the add in the import dialog box images are added to the catalogue of their current location. You cannot specify a different destination when you use this option. When you use the copy option, then you are able to specify a destination in the right column of the import dialog box. You must choose the appropriate drive and the main folder in the folder tree that appears. Then, specify the name of the subfolder in the highlighted area:

  

  You talked about change the destination of the catalog. It was a poor choice of words or you don't understand how the catalog works. The catalogue is available in one place. Normally it does not move anywhere unless you choose to do it manually. You can control the destination of your imported images, and Lightroom will import to the destination on any hard drive. But they are managed using the catalogue that remains in one place.

• I have a MAC - recently reinstalled Yosemite version and cannot change the PDF docs

  I can't edit the PDF file.

  I recently reinstalled version Yosemite on my Mac air

  Hello

  I'm sorry, but the information you provided is slightly less.

  Could you please explain more about this?

  What exactly are you trying to do?

  Experienced, what are the challenges you face?

  Which version of Reader/Acrobat do you use?

  What OS are you?

  What type of file you want to change?

  Is there an error message or an error code associated with? If so, please provide us with the screenshot of the same thing.

  If there is no more relevant details related to the question please an update with the same.

  Concerning

  Sukrit diallo

• Captivate 8 - can I change the appearance of the Interactions of learning?

  I am referring to the Interactions of learning provided by Captivate. Is it possible to change the look of it? For example, to remove the space for the title and just keep the interaction of text?

  Basically, do not use models by default but keeping the interaction.

  No, only the colors can be customized in the interactions of games tests.

• Captivate 8 - cannot change the captions or contained text of the smart shapes

  I am arm wrestling with C8 after C7 update last week.  Now, on the first software Simulation, I recorded from scratch, I can choose failure of legends and the intelligent forms with text in them, but I can't edit their content.  These elements are NOT locked in the timeline panel, otherwise I would not be able to select them.  I can move them around, but they contain the auto text that Captivate put into them, and I can't change it. I can also change the shape and type of legend of failure or intelligent form. When I insert a new legend I have the same problem.

  
  

  The project has 55 slides, so it should not be because of its size.  I erased the library of unused items.

  I recorded under a new name, closed and reopened the project, closed and reopened C8 - same question. Any ideas?

  Sorry, I forgot this post from last week and published inadvertently.  I'll mark this one as replied to clean of open-ended questions.