Import of data dictionary

Similar Questions

• Re-import table data dictionary

  Hello

  I recently created a relational model with more than 2000 paintings by importing the data from the data dictionary. Unfortunately, I left out a few tables when I originally created the template. How can I add the tables after the fact? I tried to go through the process of reimportation again, but it doesn't seem like it adds tables. Thank you!

  Hello

  Are there any error messages in the log file?  (This is normally datamodeler.log file in the datamodeler\datamodeler\log folder, unless you set a different location on the environment/log preferences page.)

  Note that if you want to update the properties of Java, the updated file is different for the version 4.0.0.833 Data Modeler.  AddVMOption reports should be updated in the product.conf file and not in the datamodeler64.conf file. Assuming you are on Windows 7, you should be able to find the product.conf file in the file C:\Users\\AppData\Roaming\Oracle SQL Developer Data Modeler\4.0.0.833.

  David

• Import data dictionary stored procedures

  It's the rewamp of an old archived thread:

  Re: import of data dictionary

  .. relevant even today with DataModeleter 4.1 (standalone) on Oracle 12 c: I seem not to be able to import any stored procedure / function of the well data dictionary that following the steps (see link) and reaching even to the summary confirming the detection of target objects:

  

  However, at the time of the merger, previews DDL (to import/merge, no generation) says:

  -CREATE THE PROCEDURE	0
  -CREATE FUNCTION	0

  Am I missing a trivial step?

  THX

  Hello

  I think I know what is the cause of the problem.

  There is a bug in version 4.1 where different types of objects (including functions and stored procedures) do not appear in the tree view to compare if the property "include physical properties to compare the feature ' is not defined.

  So the solution is to ensure that this property is set.  It is on the Data Modeler > DOF > DDL/comparison of preferences page.

  This bug in the next version.

  David

• 4.0EA1: DBMExtractionController ERROR in Data Dictionary Import

  Hello

  
  

  When importing a data dictionary the following messgae is written to the datamodeler.log file:

  
  

  2013-08-06 14:46:12, 732 [AWT-EventQueue-0] ERROR DBMExtractionController - DBMExtractionController.generateDesign (): failed to get the appropriate Site of RDBMS

  2013-08-06 14:46:12, 767 [Thread-27] ERROR AbstractDBMExtractionHandler - database import error:

  java.lang.ClassCastException: oracle.dbtools.crest.model.design.storage.StorageDesign$ NullStorageDesign cannot be cast to oracle.dbtools.crest.model.design.storage.oracle.StorageDesignOracle

  at oracle.dbtools.crest.imports.metadata.oracle.MOHDatafileOracle.getTablespaces(MOHDatafileOracle.java:260)

  at oracle.dbtools.crest.imports.metadata.oracle.MOHDatafileOracle.generate(MOHDatafileOracle.java:86)

  at oracle.dbtools.crest.imports.metadata.AbstractDBMExtractionHandler.generateDesign(AbstractDBMExtractionHandler.java:258)

  to oracle.dbtools.crest.imports.metadata.DBMExtractionController$ EmptyRunner.run (DBMExtractionController.java:424)

  at java.lang.Thread.run(Thread.java:724)

  2013-08-06 14:47:37, 121 DBMExtractionController [Thread-27] ERROR - Failed to create the subviews

  java.lang.NullPointerException

  at oracle.dbtools.crest.model.design.relational.RelationalDesign.createSubviewsOnSchema(RelationalDesign.java:2038)

  to oracle.dbtools.crest.imports.metadata.DBMExtractionController$ EmptyRunner.run (DBMExtractionController.java:457)

  at java.lang.Thread.run(Thread.java:724)

  The connection test is always successful.

  Best regards

  Kalle

  Hello

  I added a new site via the Administration of the RDBMS Site and is assigned in an import dialog box. Thus, it works fine now.

  Best regards

  Kalle

• A full import by using datapump will overwrite the target database data dictionary?

  Hello

  I have a 11G with 127 GB database. I did a full export using expdp as a user of the system. I'll import the created dump file (which is 33 GB) on the basis of data from 12 c target.

  When I do the full import on the 12 c database data dictionary is updated with new data. But as is it already contained data dictionary? It will also change?

  Thanks in advance

  Hello

  In addition to the responses of the other comrades

  To start, you need to know some basic things:

  The dictionary database tables are owned by SYS and must of these tables is created when the database is created.

  Thus, in the different versions of database Oracle there could be less or more data dictionary tables of different structure database,.

  so if this SYSTEM base tables are exported and imported between different versions of oracle, could damage the features of database

  because the tables do not correspond with the version of database.

  See the Ref:

  SYS, owner of the data dictionary

  Database Oracle SYS user is owner of all the base tables and a view of the data available to the user dictionary. No Oracle database user should never change (UPDATE, DELETE, or INSERT) ranks or schema objects contained in the SYS schema, because this activity can compromise the integrity of the data. Security administrator must keep strict control of this central account.

  Source: http://docs.oracle.com/cd/B28359_01/server.111/b28318/datadict.htm

  Prosecutor, the utilities for export cannot export the dictionary SYS base tables and is marked

  as a note in the documentation:

  Data Pump export Modes

  Note:

  Several patterns of system cannot be exported because they are not user patterns; they contain metadata and data managed by Oracle. Examples of system schemas that are not exported MDSYS SYS and ORDSYS.

  Source: https://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#SUTIL826

  That's why import cannot modify/alter/drop/create dictionary database tables. If you can not export, so you can not import.

  Import just to add new Non - SYS objects/data in the database, therefore new data are added to the dictionary base tables (as new users, new tables, code pl/sql etc).

  I hope that this might answer your question.

  Kind regards

  Juan M

• Import the data on large patterns dictionary... I'm doing something wrong?

  I understand that when I'm working on a model and you want to add a few new DB objects to my relational model of DB (say a few tables) or compare the changes in my relational model for data dictionary - I need to use the import data.  However, when I have a grand scheme of DB (some of our DBs production have hundreds of thousands of objects), it takes an absolute age.  I want often only import a few things or work on the designated items.  For example, 3 tables with the prefix CUST * or compare a few tables, I changed in my relational model for a target given DB, to generate a specific DDL script target.  But I think I have load the list of DB objects?

  Is there a way to prefilter the items recovered by the import data dictionary? e.g. Select the types of objects to include (in my case TABLES only) in the extraction and a filter name on them (in my case 'CUST')?  I don't want to get the entire schema each time just to compare some things, it is almost unusable because it takes forever!

  Not that the diagram does not have a connection with the database, so if someone changes the database there is no way of knowing without run the import again or to do the sync I described (unless you have a process of change management nice where the developers actually connect database changes).

  You could do a CTRL + A (select all), and then run the synchronization. That you will get a list of all of the objects shown in the diagram from the db.

  To filter this list in the dialog box to compare,

  1. Click the tabular view tab
  2. Select "Modified" in unrolling status
  3. Select 'Table' in the Type menu drop-down

  Then you are back to opening to the bottom of the shaft on these items to see what has changed.

• Comments not imported SQL Server data dictionary. SDDM 3.3.0.747

  Hello
  
  SDDM 3.3.0.747 32-bit on Windows 7 64 bit.
  
  Comments are not imported from the SQL Server 2008 data dictionary. Connection via Microsoft JDBC Driver for SQL Server jTDS 1.2.7 4.0
  
  What did I try? In generation SDDM DDL, comments in DBRMS for SQL Server are generated with ' EXEC sp_addextendedproperty 'MS_Description', 'Test comment'...» "so I added an extended property named 'MS_Description' in the database SQL, both on the table and column. None of them have been imported from the SSDM data dictionary. I tried the above two pilots. Is this a bug or am I missing something?
  
  I found the similar question thread Re: data dictionary import does not import comments from the column for SDDM 3.0.0.665, so I guess it's a bug when importing with JDBC drivers.
  
  MiGli
  
  Edited by: MiGli_1006342 may 25, 2013 08:32
  
  Edited by: MiGli_1006342 may 25, 2013 09:02

  Extended properties have been imported correctly no database SQLServer to DM 3.3.0.747.

  Calls to sp_addextendedproperty and fn_listextendedproperty have changed.

  I don't think it's a problem with JDBC drivers.

  One bug fix should be available in the next version of the DM.

• DataModeler 3.0 ai2: crash after the import data dictionary

  Hello
  After you import the model data dictionary db successfully, the following operation to register as normal ".dmd" project, will unfortunately in... with the following exception error: fatal:
  
  Exception in thread "Thread-11" means: PermGen space
  at java.lang.Class.getDeclaredMethods0 (Native Method)
  at java.lang.Class.privateGetDeclaredMethods (unknown Source)
  at java.lang.Class.privateGetPublicMethods (unknown Source)
  at java.lang.Class.privateGetPublicMethods (unknown Source)
  at java.lang.Class.privateGetPublicMethods (unknown Source)
  at java.lang.Class.getMethods (unknown Source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.addClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.getClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.addClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.getClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MDTransformationManager.createTra
  nsformers (unknown Source)
  at oracle.dbtools.crest.model.metadata.MDTransformationManager.getTransf
  ormersFor (unknown Source)
  at oracle.dbtools.crest.model.metadata.XMLTransformationManager.getXMLCo
  content (unknown Source)
  at oracle.dbtools.crest.model.metadata.XMLTransformationManager.saveObje
  CT (unknown Source)
  at oracle.dbtools.crest.model.metadata.XMLTransformationManager.saveDesi
  GN (unknown Source)
  at oracle.dbtools.crest.model.design.Design.saveAll (unknown Source)
  at oracle.dbtools.crest.swingui.ControllerApplication.saveAll (Unknown So
  extended)
  at oracle.dbtools.crest.swingui.ControllerApplication.saveAsDesign (exercise
  WN Source)
  to oracle.dbtools.crest.swingui.ControllerApplication.access$ 5800 (Unknow
  Source n)
  to oracle.dbtools.crest.swingui.ControllerApplication$ SaveAs$ 1.run (exercise
  WN Source)
  
  How can I solve this problem?
  
  Thanks in advance for your support.
  Antonino

  Antonino thanks.

  Unfortunately I'm unable to reproduce this.
  Is it possible to allow you to test the same import of 32-bit Windows?

  Ivan

• DataModeler: import of the data dictionary table comments

  Hi, I begin barely using SQL DataModeler and seems to have a problem with regard to the comments of reverse engineering table.
  
  When you use Import > data dictionary, I have no trouble importing column comments, but the comment table always seem to come up empty. I see no obvious option for y understood/off table/column comments so am puzzled as to why column comments import very well but the comments in the table are not (Yes, the tables, I'm importing have comments on the tables and columns).
  
  What Miss me? Any help is appreciated.
  
  -Andy.

  Hi Andy,.

  There is no option for this. They should be included, but unfortunately there is a bug and not included.

  Philippe

• Data dictionary Synchonizing (reading) - database

  Hello

  I work for a while with the Oracle Data Modeler using the JDBC tab for the database connection. The database is a SQL Anywhere and the connection details like: jdbc:sybase:Tds:localhost:2638? ServiceName = Hades & CHARSET = utf8.

  Unfortunately, I have still no clear idea in my mind about the relationship of the data dictionary and the database connected (via JDBC adapter).

  -What time is read the database? If it is read in the dictionary? I guess that the information of connected database are read in the ODM at startup?

  -If a change occurs in the database (for example, a column added, a table, or a foreign key), can I manually update the ODM dictionary?

  -In connection details, I can change the local host with an IP address and press the Test button with success as a result. But I'm not sure, the data dictionary now 'filled' with the database newly connected without rebooting of the MDGS?

  
  

  Documentation of any clarification or pointing to on the concept of how and when the data dictionary and database are synchronized would be very welcome.

  Best regards

  Robert

  Hi Robert,.

  Just to clarify that "Data dictionary" refers to the definitions of the database metadata.  File > import > data dictionary is important these definitions in Data Modeler.

  (There is no separate "data dictionary" in data maker.)

  The blue button on the right (the data dictionary synchronize with model) is similar in effect to the opening of your model and then by doing a file > import > data dictionary (and by setting the option to exchange the target model in step 2 of the Wizard).

  Both shows a comparison between the current relational model and the current definitions in the database.

  David

• synchronize data dictionary with the model does not generate the DDL

  Hello

  I followed the instruction from the link below

  Re-engineering of your database by using the Data Modeler 3.1

  Here's what I did.

  1. the tables imported using import-> MS SQL 2012 data dictionary (used jDTS 1.3.1)

  2. Add new column to one of the imported tables of the Data Modeler

  3. click on synchronize data dictionary button

  4. compare the contextual model poster! indicating there is gap, but the DOF Preview button is disabled.

  Would you advise me what I got wrong?

  Best,

  Yong

  MODIFY the script is only supported for Oracle databases.

• Problems with synchronization model with the data dictionary

  Let me start by saying that I do something wrong (there not much documentation on this product so far...).

  I designed my whole from scratch in SDDM 3 and then put model upgraded to SDDM 4. There is already a problem with the sync option from the data dictionary model, in which it works only if first import you an object any in the data dictionary for the model for the reverse to work. I did, and now I can't start the synchronization successfully. The thing is, but I have all the objects already created in my database, according to a specific schema, each time I start the synchronization, it always tells me that none of my model objects exist on the destination! I've tried setting the owner on the physical model, remove, modify the connection to connect with the owner objects, but nothing seems to work.

  Any ideas?

  Hello

  You need clear information source banner and rename the schema in the relational model if you want to use the Sync feature, otherwise, you can use import wizard of data dictionary (possibly to check 'target swap') and to

  don't check box "use schema property in compare features" If your schema is changed.-"preferences > Data Modeler > DOF > compare > ' or to compare options in compare dialog.

  You can clear information source banner by selecting all the objects on the diagram (Ctrl-A) and use 'Clear stamp source' in the context menu for the selected objects.

  In the next version - there are options to work around the source schema and the name of the source object, and you can use different user and change the name of the table in the physical model in order to synchronize with a different schema or even track changes in table name.

  Philippe

• How to add an existing connection name already model to be able to synchronize to a data dictionary

  If I import my objects of a data dictionary I can change my objects and then sync my data dictionary (database). I'm even able to determine another connection to do this synchronization. But if I conceived my entire model from scratch, I am not able to sync to an existing data dictionary. Already, I produced my script and used to create a new scheme, with all my items in there. Now, I need to modify my objects and synchronize it at this existing data dictionary.

  Hello

  You can compare the database to import the dictionary Wizard - check 'Swap' indicator if you want to generate updated database. If you are importing at least one table in the model, you can use the synchronization feature. This step won't be necessary in the next version.

  Philippe

• Numbers - how to import external data to a cell in a single file into a new cell in another file?

  Numbers - how to import external data to a cell in a single file into a new cell in another file?

  I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)

  to import a calculation of a cell in a file in a new cell in another file.

  Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.

  It was so easy in Excel. Until the reference computer broke down.

  By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.

  No help manual online or anywhere. I think that maybe the function is absent in number.

  Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.

  Formulas in a numbers document cannot reference cells in other documents of numbers.

  "Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.

  Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.

  Kind regards

  Barry

• import excel data to labVIEW, filtering and exporting to Excel

  LabVIEW dear specialists,

  I have about 2500 data each for acceleration and force stored in two excel columns of the worksheet as well as time data in another column. My problem is to purify my data of noise so I could generate thin sinusoidal signals for my thesis. I'm still new to labVIEW and I would like to ask for help to import my data from labVIEW, filter and exporting to Excel. Please help me. I enclose my data below. Thank you very much.

  froebaruch

  Hello!

  These could be good starting points:

  http://www.NI.com/analysis/Excel.htm

  https://decibel.NI.com/content/docs/doc-8226

  A few examples delivered with Labview, too.

  Kind regards

  Marco