Import of lvm to express signal does not lead to consistent data set
When you import a file of lvm captured in a VI, SignalExpress visualizes as dozens of data points separated rather than a set of waveform data. Anyone know if there is a problem with the way I am that capture/storage of the data, or is - what a questions at the end of SignalExpress with handling data? One of the files of lvm header is shown below:
LabVIEW measurement
Writer_Version 2
Reader_Version 1
Tab splitter
Decimal_Separator.
No. Multi_Headings
X_Columns one
Time_Pref Relative
Thank you
Andy
p.s. that's using LabVIEW 8.6 and SignalExpress 3.0
Hi Andy,.
I opened file lvm in Signal Express and saw the same thing you knew. I had a look in the file in the header properties and noticed that the number of samples has been set to 1. I've changed that to 1276 like you who have many data points and they are all now showing on one data set. So, it seems that is trying to create a set of data for each data item in the file lvm. Try changing the number of samples in 1276 and let me know if this is the correct waveform, you need to see.
Kind regards
Jas.W
Tags: NI Hardware
Similar Questions
-
had dsl fixed today, but my outlook express password does not work. How can I reset or start over with a new password
You must use the same password that you would use if you have access to your messages via the Webmail of your server site. You will need to reset it with them.
-
Original title: screen saver does not start because MSVCR100.dll was not found
After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:
ScreenSaver: Photo screensaver.scr - unable to locate component.
This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.
The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.
Help, please. Thank you.
Hello
It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.
But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.
-
TDSB import error "does not exist in the data store."
I have a problem when you import a relative definition, do not know if it is to have a focus in the name.
When I run the command on the server,
Java com.fatwire.csdt.client.main.CSDT $WCS_CONTENT username = password CS_USER $= $CS_PASS resources = ImagePD:876f1718-06e7-40bd-bbc3-cea02d07d1f1 cmd = listds
I have the answer,
No such resource (s).
But the file exists in the directory,
sites\export\envision\cs_workspace\src\_metadata\ASSET\ImagePD\73\10\(876f1718-06e7-40bd-bbc3-cea02d07d1f1) of notícia. main.xml
When I run the command to import,
Java com.fatwire.csdt.client.main.CSDT $WCS_CONTENT username = password CS_USER $= $CS_PASS resources = ImagePD:876f1718-06e7-40bd-bbc3-cea02d07d1f1 cmd = import
I get this error message,
[2015-05-27 19:16:50, 883 UTC] [ERROR] [.kernel. [Default (self-adjusting)'] [com.fatwire.csdt] error on import: import error: import error: resource DSKEY:ImageP-876f1718-06e7-40bd-bbc3-cea02d07d1f1 does not exist in the data store.
com.fatwire.cs.core.realtime.DataException: import error: resource DSKEY:ImageP-876f1718-06e7-40bd-bbc3-cea02d07d1f1 does not exist in the data store.
at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:422)
at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:455)
at com.fatwire.realtime.packager.CSDTUtil.Import(CSDTUtil.java:360)
at com.fatwire.csdt.service.impl.ImportService.importData(ImportService.java:227)
at com.fatwire.csdt.service.impl.ImportService.execute(ImportService.java:88)
at jsp_servlet._jsp._cs_deployed._openmarket._xcelerate._prologactions._publish._csdt.__csdtservice._jspService(__csdtservice.java:223)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:185)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:447)
to com FutureTense.Servlet.ServletRequest.include(ServletRequest.java:1411)
to com FutureTense.Servlet.FRequestObj.include(FRequestObj.java:1429)
to com FutureTense.Servlet.JSPServices.runJSP(JSPServices.java:111)
to com FutureTense.Platform.FileSystem.FILESYSTEMJSPManager.runJSP(FILESYSTEMJSPManager.java:463)
to com FutureTense.Servlet.JSPServices.runJSPObject(JSPServices.java:50)
to com FutureTense.Platform.FileSystem.FILESYSTEMJSPManager$ JSPDataFile.run (FILESYSTEMJSPManager.java:190)
at COM.FutureTense.Common.ContentServer.jspExecute (ContentServer.java:3027)
at COM.FutureTense.Common.ContentServer.evalTemplate (ContentServer.java:2621)
at COM.FutureTense.Common.ContentServer.generatePage (ContentServer.java:1640)
at COM.FutureTense.Common.ContentServer.evalPage (ContentServer.java:1276)
at COM.FutureTense.Common.ContentServer.execute (ContentServer.java:465)
to com FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
to com FutureTense.Servlet.FTServlet.doPost(FTServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:193)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:701)
at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.fatwire.cs.ui.framework.UIFilter.doFilter(UIFilter.java:109)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
I think that it is not recognizing the file because the name has an accent. But I have another server that recognizes, but can not find the differences.
Can anyone help?
I took care of my problem.
At the beginning of WebLogic has been set the different LANG of enconding placed in the CLASSPATH.
-
from the opening, does not show the current date, need to manually refresh the page
initially the opening firefox, it does not reflect the current date. I have to refresh the screen to go to the current date.
This has happened
Each time Firefox opened
is past week or two, cause unknown
A possible workaround is to use to remove the navigation, search and download history on Firefox to clear the cache of the browser on the output. That will make Firefox load pages from the server instead of using the version in the cache.
-
The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date. What should I do? Thank you.
Hi david,
where do you find ' update of the date and time.
Quinn
-
Original title: silverlight
I tried to install Silverlight on my computer running Windows XP 32-bit with service pack 3. My question is, it downloads and then when I try to install, it appears that my CPU will not Silverlight support. I get the Message 1503, CPU does not support the SSE instruction set that Silverlight requires to operate.
So here's my question... How can I fix it? And what is the problem? Any help would be appreciated... Is it a I need a new operating system problem or just a cranky computer problem?Thank youLynnI tried to install Silverlight on my computer running Windows XP 32-bit with service pack 3. My question is, it downloads and then when I try to install, it appears that my CPU will not Silverlight support. I get the Message 1503, CPU does not support the SSE instruction set that Silverlight requires to operate.
So here's my question... How can I fix it? And what is the problem? Any help would be appreciated... Is it a I need a new operating system problem or just a cranky computer problem?Thank youLynn========================================
This means that your material is not up to the task.If you search the Forums Silverlight 1503
you will find that you are not alone.Silverlight .NET forums
http://forums.Silverlight.NET/searchThe following article explains what is a CPU.
Central processing unit
http://en.Wikipedia.org/wiki/Central_processing_unit -
Windows Media Center EPG does not have the correct data
Windows Media Center EPG on my computer is so ugly!
Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.
The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").
It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?
What is MS Media Center that does not have the correct data?
I am in Denmark, if this has an impact on the response.
Thank you and best regards!
Hello
Thank you for your response. I appreciate your time.
I suggest you to post your query on our MSDN Forums, as this issue should be better there.
Please refer to the reference to the link below to send your request:
http://social.msdn.Microsoft.com/forums/en-us/home
Hope this information helps.
-
Tablespace does not use a certain data file
Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.
c115bca7-E432-460f-a0c5-273b2157dcbe wrote:
Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.
1 cause the second data file - is not activate with auto-extend and its fixed size, 8 GB, which could deliver the extensions are not free - filled and that you may not able to find any free extends from dba_free_space
2. Please activate auto extend for this data file and add the new data file based on space allocation.-Pavan Kumar N
-
original title: Outlook Express 6.0
Recently, when I send an e-mail message by using Outlook Express 6.0 three things happen:
(1) he does not leave the Outbox, unless I have to go in and manually remove it.
(2) my report of recipients receiving multiple copies of the same message (for example, received the same email 6 times)
(3) my sent folder is not updated with the emails I sent.
I'd appreciate any help that could be offered.
Thank you!
Glenside Guy
Your sent items folder is corrupted. Move or copy messages from the folder that you want to keep. Then close OE and delete the file sent items.dbx and outbox.dbx (hidden). OE will then create new ones, and that should solve the problem.
Because your files has been corrupted, you might consider backup before they get completely corrupt and in addition, you could go to file | Identities and setup a new identity. This will give you a base of new messages, not corrupted, and you then go to file | Import | Messages and import them from the old identity.
Steve
-
final cut express 4 does not recognize my password or the password it seeks
Final cut express 4 of installation ask for my password, I tried every password I know not, and none work. What password he seeks?
Are you sure that it does not ask the serial number which should be packing?
You can post a screenshot of the dialog box?
MtD
-
Slot PCMCIA (Express card) does not not on the Qosmio F50
I have a new notebook from Toshiba Qosmio F50.
I am in the express card slot allows you to display images on a CF card, but it does not work, it does not detect anything.Any idea? Should it be turned on at all?
Do you use an adapter to view the photos on a CF card?
Maybe this card will not take in charge the laptop.And do you see anything in the Device Manager?
What happened when you use the CF card with a USB card reader? Similarly?
-
Importer of CT in Excel 2003 does not appear in the COM add-in Menu
I have a program that generates a PDM file with data, and when the run is complete, I would like to import the data into Excel and manipulate by using a macro. I can import the file manually and run the macro by opening a second file that contains the macro, but open the second file is a chore.
I would like to expand the macro so that it automatically imports the file PDM, and based on what I've seen on the forums for that, I need to register to the importer TDM as a COM Add - In. When I go to the menu COM in Excel and you try to add ExcelTDM.dll, it does not appear in the menu.
A few additional details that may be useful:
TDM Excel importer is version 3.4.0.0
I already tried to uninstall and reinstall the importer
Using the Excel toolbar works to import the data
A double click on a file works to import the data
The installed files are located in C:\Program NIUninstaller Instruments\Shared\TDM Excel import. Moving them to C:\Program NIUninstaller Instruments\Excel TDM had no effect.
Thanks in advance for your help.
I do not see the importer of CT in the COM add-ins, but the VBA ran very well...
I tested it on a clean machine with Excel 2003 and importing TDM 3.4.
-
My outlook express 6 program does not load the screen prperly. The header bar is less about 15-20 mm and the bottom scroll bar is not visible
You are the very welcome. Glad it worked for you.
-
Microsoft Outlook express Outbox does not transmit messages - Messages remain in the Outbox for ever
When you create new messages, outlook does not transmit messages. They remain in the Outbox for ever
Assuming that you have checked The Send Messages immediately and you get no error message, you may need to the corruption of dbx files.
Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.
After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
General precautions for Outlook Express:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmNote that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
Compact often as specified above.
And backup often.
Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx
Maybe you are looking for
-
How to limit the use of data on my wifi router?
I can connect to my wifi router at home and in 3 days that my 1 GB of data on my wifi router is complete. I didn't do any updates and I don't know what is with my data. I connect to the router wifi, as my cell signal is not good at home, so if I conn
-
Have I messed up my Wi - Fi UK Xoom trying a reset to see if she would take OTA ICS? Tablet turned, held the Start button / stop and volume control set until the Tablet restarted. The display will now show "Starting from RSD Protocol support 0 Onewir
-
Want 5642: Move back home wireless and wireless printer
I can connect to my printer Envy 5642 issue a command to print without problem. I can connect to the internet using my wireless connection at home Windstream and surf the web, no problem. But I can't connect to both at the same time. I have to keep
-
USB OTG does not connect in A6000
Please advise how to connect the USB storage to Lenovo A6000 by OTG?
-
is there a combination of keys on my keyboard that will be affeck volume on my speakers?
Is there a combination of keys on my keyboard that will affect the volume on my speakers