Import receipt manually using KING (through the interface).

Similar Questions

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• Loads separate lines into PO_LINES through the interface tables

  Hi gurus
  
  I need to load a standard PO via the interface. In interface tables there are several lines using a single ITEM_ID, changing only ITEM_DESCRIPTION.
  This ITEM_ID is a service, each line represents a detail of this service.
  
  After the import process, in PO_LINES, there is a single line with amount total.
  
  How can I do to load separate lines in PO_LINES?
  
  Thanks in advance
  Oscar

  Hi Oscar,.

  Unfortunately, there is no way to do it using PDOI... Try to use the private api po_interface_s.create_document. But the problem is that you might not be able to use it as a... have to copy this API and modify as needed.

  Kind regards
  Praveen

• How to import xsd and use it in the transformation for mapping

  I built a xsd and you want to use the xsd to the development in BPEL Process.I imported. But I can't figure out how to proceed further. Anyone can suggest me how to import xsd and use it as it must be defined in wsdl using the law. Is it possible, we can use xsd?

  in the left lower structure window, the tree you can import patterns.
  When completed the scheme will get an element import in your wsdl file, so no manual work not needed for that.

  After that you can simply use it to create variables based on it

• Members of the common entity through the Interface

  Hello
  
  
  I am creating shared members by using the interface table hs_entity_hierarchy in collaboration with the table of members, but they come across as primary values, even if I put their isprimary value 2...
  
  Did I miss something here, obvious or not?
  
  n. b. the values already exist in a hierarchy of primary values.
  
  
  Thank you
  
  Robert.

  Have you tried using Y or N, 1 or 0 for the column IsPrimary, N or 0 should mean a shared instance.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Allow specific access through the Interfaces ASA 5510

  Hi all

  In my quest to learn Cisco IOS and devices, I need help in smoothing traffic, or access lists, allowing traffic between internal interfaces on the SAA specifically.

  I have an ASA 5510:

  WAN/LAN/DMZ ports labled E0/0 (LAN), E0/1 (WAN), E0/2 (DMZ).

  Connected to the port E0/0 is a 2811 router

  Connected to the port E0/1 is the (external) Internet

  Connected to the port E0/2 is a 2821

  (I'll add a 3745 for VOIP) port E0/3, but it has not yet happened.

  I want to allow traffic between the 2821 and the 2811 routers so that devices on the networks behind them can talk to each other.

  I've specified specific subnets between the ASA and the routers because I want to learn how to shape traffic behind routers, as well as on the ASA. So behind the routers I have different VLANS, but I'm not restrict access between them, still, at least I don't think I am. But as it is, behind the 2821 devices cannot access the DNS / DOMAIN SERVER that is located behind the 2811. Right now I have the routers DHCP power, who works there. Currently devices behind the router 2821-3560 switch cannot access the domain server, primary dns server.

  How can I set the ASA to allow traffic to flow between the two routers and their VLANS?

  Here's the configs of each device and I have also included my switch configs, incase something should be set on them. I only removed the passwords and the parts of the external IP address. I appreciate the help in which States to create and on which devices.

  I think it is best that I put the links to the files of text here.

  Thank you!

  You must remove the following statements on the two routers:
  -# ip nat inside source... overload
  -for each # ip nat inside/outside interface, if they have configured.

  Remove ads rip of the networks that are not directly connected:
  -2821: 172.16.0.0, 192.168.1.0, 199.195.xxx.0
  -2811: 199.195.xxx.0
  -ASA: 128.0.0.0

  No way should be added to the routers, since he is the one by default, put in scene to ASA.

  Check the tables of routing on routers and the ASA.

  On ASA:

  -Remove:
  object-group network # PAT - SOURCE
  # nat (indoor, outdoor) automatic interface after PAT-SOURCE dynamic source

  -create objects of the networks behind the LAN router and enable dynamic NAT:
  network object #.
  subnet
  NAT (inside, outside) dynamic interface

  -review remains NAT rules.

  -to set/adjust the lists access penetration on the interfaces. Do not forget to allow the rip on the LAN and DMZ interfaces.

  -Disable rip on the outside interface.

• Deliver EN import in Excel using 'Split on the worksheet Pages'

  Hi all
  I'm having a problem of my import EN in which there are several members of the 'Page' in which I would like to display in multiple worksheets. I tried checking the box 'Split Pages through spreadsheets', however, only the first member of Page is imported. I am running EN version 11.1.2.721 using SmartView version 11.1.2.2.310. Thanks in advance!

  I tried on 11.1.2.2.000 (Build 453) Smartview and 11.1.2.2.300 EN and it works very well.

  He adds all pages as worksheets in the same workbook. See if it's a problem with your en version

  Concerning

  Celvin

  http://www.orahyplabs.com

  Please check the answers as useful/correct as appropriate

• How to create an event of time without going through the interface user freeze

  Hello

  I'm new to labwindows and I'm trying to create a time event where every hour for 24 hours, I want my program to write something in excel.

  I tried to use the Delay and SyncWait and these functions freezes to the top of the user interface.

  All the tips/help will be appreciated.

  Thank you

  If you are new to CVI, a good idea is to look at the examples provided with CVI. For your case, I recommend timer.cws and asyncdem.cws. You will find what you need to use a timer function, not the delay or the syncwait.

• Load to the helmets on Macbook pro through the interface audio usb external keyboard outputs to the inputs 3-4

  I'm trying to understand why there is a load on the output on headphones output Macbook Pro external keyboard outputs 1-2 going on 3-4 the corresponding inputs of the audio interface.  I am interested to know if anyone has something similar.

  Default logic on your stereo Out as the default output of your tracks. The inputs of your tracks have nothing to do with it. If the third line above the control Out stereo says Pan, you can click on it and change it. I hope this helps.

• I would like to re - import photos into LR cc but do not appear when I hit import.  When I look through the viewfinder, they are always present.  How to spend it?

  I want to import folders of photos in LR, but they do not appear on the list of the source, although it is on the hard drive. How does it evolve?

  Thank you.

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  These images are already in the catalog. Select all the photos in the section catalogue library, hit the-key to bring up the filter bar, select the text option in the upper part, select file name then contains all and type in one of the file names. It should show this image file.

  This image appears as in the LR catalog?

• Is it possible to see the pages that an image is used on through the use of page indicator?

  I create a book 5 Lightroom and really like that it shows me the number of times that that a photo was used in the book.  Is there a way to see where it is used?

  Click on the mouse exactly on the indicator 'Number' and the pages will go to the yellow-culminating point where this image was used. (be in multi-page view CTRL + E)

  

• Using variables in the interface

  Hello
  
  I have a variable which contains this statement: select max (ID) + 1 from table1
  In an interface I try to map the ID from table1 with this variable, but I still have the same error: violation of KP.
  
  I tried with a problem too but same sequence

  Hello

  I believe that this happens because of the following

  (1) your target T table has a PK/UK set on column ID.
  (2) variable in the select query is: select max (ID) + 1 t
  (3) to assume that select max (ID) + 1 t returns 5
  (4) now in the package you refresh the Variable, and it is up to 5 for all lines
  (5) 1st row insertion will work as ID column becomes a new value so no PK/UK breach
  (6) but 2nd, 3rd... .Nth line insert also get value from column ID 5! By thus breach PK/UK

  Thank you
  Fati

• large file audio attachment sent by a friend keeps repeating and blocks all other messages, but mail gets through the interface of Yahoo on my iPod

  MP3 big unsolocited 8.9 MB file that is sent by a friend takes forever to download and then prevents any other messages being delivered. Once deleted keep repeating (up to about 10 times now! with the same result.) This does not happen on my Ipod that does not Thunderbird.I have disabled a filter that could have stopped this file but without result. Don't know if is my problem or their

  Any help gratefully received
  Best wishes

  Could you if you please that mark as resolved

• Export of data using the interface of the Apex

  I want to export at the same time and in a single file
  -database objects (tables, constraints, etc.)
  -possibly databases and data
  which are used by a given Apex application.
  
  QUESTION: Is it possible to do it through the interface of the Apex?
  
  I know how to do this with SQL-Developer.
  
  I also know how I can export through the Apex interface
  an object selected (for example, a table).
  But what of all the exporters together?
  
  Thank you very much
  Marios

  Hello
  Try this.

  Export all the objects schema DDL in sql single file. (tables, constraints, etc.) at the same time
  Workspace opened-> Home > utilities > Generate DDL-> createscript->-> schema name choose fron-> option selection list choose Add file save as Script-> check-all > click Generate ddl-> name of script type-> click createscript-> stored in your scripts sql inside the WORKSHOP of SQL TAB-> click on export button right under task link-> click on checkbox for the corresponding file name and click on-> to export-> export Scripts right side have your file-> click Export all.

  Combining the Application + objects ddl + data
  Open your application-> whose home > Application Builder > 123 Application > supporting objects >-> Create from scratch-> name-> editor of Setup Scripts will open-> copy and paste the sql commands that you exported using steps above

  data
  If you need to export data from sample then you can paste these commands insert into tablenamein the same sql editor in step 2 and save it

  Note: in your home > Application Builder > 123 Application > objects supporting > status-> include the object definitions to support the export of export = yes

  Export your application and the user can import using single sql file.

  Thank you
  Mark Wyatt

• How to import general imbalance using the standard import GL program.

  Hi experts,

  I wrote a package that the newspaper using standard gl inface import tax program.

  When I import the journal dolts he l gives an error (EU02, P). Please tell me how to import imbalance standard thorugh gl journal import program.

  It's my obligation to enter jv unbalance in the category 'Budget' of custome api.

  Please help me.

  Thank you

  Yoann

  Thank you.

  I try to download via the import program...

  PROCEDURE UPLOAD_BUDGET_JV (P_BUDGET_ID IN NUMBER) IS lv_request_id NUMBER;       number of irun_id;       errbuf VARCHAR2 (2000);       orig_req_id NUMBER;             num_copies NUMBER;       print_style VARCHAR2 (100);       printer VARCHAR2 (100);       save_output_flag VARCHAR2 (10);       save_output_bool BOOLEAN;       BEGIN fnd_global.apps_initialize (5443,50263,101);           fnd_profile.get ('CONC_REQUEST_ID', errbuf);       orig_req_id: = to_number (errbuf);                   / * Copy the print at the request of the child options * / IF (fnd_concurrent.get_request_print_options (orig_req_id, num_copies, print_style, printer, save_output_flag)) THEN IF (save_output_flag = 'Y') THEN save_output_bool: = TRUE;         ANOTHER save_output_bool: = FALSE;         END IF;         IF (NOT fnd_request.set_print_options (printer, print_style, num_copies, save_output_bool)) THEN fnd_file.put_line (FND_FILE. Log, 'Impossible to set print options');         END IF;       END IF;                       dbms_output.put_line(errbuf||) e -'|| orig_req_id);           SELECT gl_journal_import_s.NEXTVAL INTO irun_id FROM DUAL;       dbms_output.put_line (irun_id);       INSERT INTO gl_interface_control (status, set_of_books_id, je_source_name, group_id, interface_run_id) VALUES detached ', 1001, 'Map', null, irun_id);       /* Launch the concurrent request */       lv_request_id         := fnd_request.submit_request(             'SQLGL',             'GLLEZL',             '',             '',             FALSE,             to_char(irun_id),             '1000',             'NO',             '',             '',             'NO',             'NO',             'Y',         chr(0),             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '', '', '', '', '', '', '', '', '', '',             '');                   dbms_output.put_line ('req_nu -' | lv_request_id);       IF (lv_request_id = 0) THEN errbuf: = fnd_message.get;         fnd_file.put_line (FND_FILE. Journal, errbuf);         gl_message.write_log ('LEZS0001');         IF (fnd_concurrent.set_completion_status ('ERROR', errbuf)) THEN NULL;         END IF;         dbms_output.put_line (' ERROR: ' | errbuf);       ELSE gl_message.write_log ('LEZS0000', 1, 'REQ_ID', to_char (lv_request_id));         IF (fnd_concurrent.set_completion_status ('NORMAL', NULL)) THEN NULL;         END IF;       END IF;       IF lv_request_id = 0 THEN UPDATE XXGP_GL_BUDGET_STG SET attribut1 = 'ERROR in RUNNING PAY IMPORT PROGRAM', attribut2 = lv_request_id, status = "ERROR" WHERE BUDGET_ID = P_BUDGET_ID;       ELSE UPDATE XXGP_GL_BUDGET_STG SET attribut2 = lv_request_id, attribut1 = "TRANSFORMED", status = "TRANSFORMED" WHERE BUDGET_ID = P_BUDGET_ID;       END IF;              end UPLOAD_BUDGET_JV;

  This is the procedure which is used to start the interface. Thank you yoann