integration of a via file .h and .lib DLL

Similar Questions

• Error message: iecont.dll and iecontlc.dll are missing?

  Original title: where to go when the file version and iecont.dll iecontlc.dll are absent?

  need to know where to recharge the missing files

  If you research Information System, Internet, Internet Explorer, Versions of the files settings and these folders are listed as not available:

  iecont.dll
  iecontlc.dll
  ieuinit.inf
  MSENCODE.dll

  The files listed as "missing" in your resume generally lack on all systems and have nothing to do with your problem not specified.

  They are part of Outlook Web Access that if you do not, you will not have installed (most people aren't and don't).  They are not yet on the XP installation CD.

  Note to the SUPPORT ENGINEER all THE "experts" hired by Microsoft:

  These files are not covered by the Windows File Protection and run sfc/scannow will not replace the.

  Please know how the auditor system and XP files generally work and stop suggesting your ideas with your links to KB articles that you have not tried yourself to see if they work, don't make sense, don't work, will never work and wasting time.

  If you need to learn how to work the System File Checker and why your ideas are ridiculous, I'll be happy to explain it - once again.

• Access denied error for some files pdf and jpg transferred via a network home of microsoft (working group)

  I use a home network of microsoft are working on a Linksys router.  Some (not all) files jpg and pdf transferred over the network producing the error access denied when you try to open, change of name, copy, etc.  I am not able to copy files thesse in a Breifcase on the remote computer which I use for backup.

  The original files are in agreement on basic computer; If I archive in a zip file I can decompress and open the files on the remote computer. If I copy on a zip drive and hand to the remote computer, the files are correct.  It might have started because I've upgraded to SP3.  Disable Norton doesn't seem to help.  I downloaded and used LockHunter which shows the files are not locked and does nothing to help them open.

  OS - XP Pro with SP3.  Security - Norton Internet Security - 20010. Adobe Acrobat 7.0 and Adobe Phtoshop 6.0 but to open JPGs with other programs and save back doesn't help.

  Any ideas?  I use the net sneaker now and stood up on the local network.

  Bill

  Well, I found my problem.  After many attempts to unlock files and cureing my registry etc etc. I put the properties on each of the files to enable sharing.  After this Briefcase has worked and I can open the files on the remote control.  I feel stupid: not really!

• How to close the instance of Firefox launched via file/new window without killing all instances of Firefox?

  Before the last update Firefox, running on Ubuntu if it makes a difference, I was able to select close on the file menu (and if memory is also by clicking the x on the last tab) to exit an instance of Firefox open via file new window.

  With the 9.x update this no longer seems to be possible. If I choose the file altogether starting an instance that was launched via the new window, all instances of Firefox away!

  It's embarrassing because I have to leave all the instances that have been launched.

  I tried closing last tab add on, and it allows me to close the last tab content but still leaves the instance running with a blank tab.

  Is there a setting somewhere that I missed to restore the operating mode to exit the additional instances of Firefox without killing all the previous configuration?

  Thank you
  Burt

  Each window must have its own close button (big X in the right corner.)
  But it depends on the 'Theme' that you use in Ubuntu. This large X chould be a round point when you hover over the color changes. It could be on the left instead of the right site.
  This screenshot shows the close the left side, but always an X button.

  CTRL + SHIFT + W closed the window Active.
  CTRL + W closes the current tab.

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

  CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

  Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  Activation of the built-in administrator.

  Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

  Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  http://home.eunet.no/pnordahl/ntpasswd/

  B. create a new user account for yourself and by copying data from your damaged to her user account

  1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

  4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

  Start > Search > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

  NET user administrator / active: No. [Enter] and exit the command prompt.

  5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

  6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

  General C. recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Help for the preparation of an emergency on a drive disk external drive via., Dell backup and recovery (DBR) - Basic Version

  I have a laptop Dell Inspiron

  IAM intend to make a rescue disk via., Dell backup and recovery (DBR) - Basic Version

  Now, it says WRT below external link that this process will create two partitions on the hard drive.

  (Wipe all prior content of course.)

  DBR_BOOT (25 MB used out of 500 MB on a FAT32 style MBR partition)

  DBR_MASTER (9.7 GB used off GB 921 on a style of MBR of NTFS partition);

  [See:en.community.dell.com/.../19499639]

  Now, my question is will I be able to save my other files on the external hard drive that I use for the above process?

  (as the above process creates two partitions of 921 GB & 500 MB)

  IAM intend to save a system image from my computer on this disc well also, I have a few 250 GB of personal & video files

  (Iam that will buy a drive hard 500 GB to make the above process...)

  H ipkmishra86,

  You will need to copy your other files on the hard disk before the distribution, you will lose it. When you have completed the process you can put back them on here.

• Files MSVC90.dll and COMCTL32.dll missing gdiplus.dll

  Original title: missing .dll files

  I have Windows 7, with 3 missing .dll files.  I tried a number of programs that claim to difficulty and install missing .dll files.  In all cases, the program will download, then when you click 'Finish', it gives you a message that it cannot install the program because I'm missing .dll files.  It's true!  That's why I'm bringing them reinstalled!  3 missing files are: MSVC90.dll and COMCTL32.dll gdiplus.dll.  Any ideas?  Thank you. * E-mail address is removed from the privacy *.

  Hello RonBrett,

  I suggest you to install the msvcr90.dll which is a party, if the Microsoft Visual C++ 2008 SP1 redistributable package.
  Click on the article below that describe the run-time components in Visual C++.
  326922 KB - Redistribution of the shared C runtime in Visual C++ component

  You must keep all the different versions of Visual C++ 2005, 2008 and 2010, because different programs need these packages installed. The Microsoft Visual C++ 225, 2008, install the redistributable Packages components runtime library Visual C++ required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2005, 2008 or 2010 is installed. The Msvcr90.dll is included in Microsoft Visual C++ 2008.

  Download the Package redistributable Microsoft Visual C++ 2008 SP1 (x 86)
  Click to download the Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)then, run System File Checker to see if you have a corrupt system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Now see if you get the same error message for missing .dll files.

  Please reply back and let us know if this can help.

  Marilyn

• Default indd file missing and open with no. Para new documents. styles

  Hello

  When you create a new indd file in ID CS6, a set of tags para etc have been automatically loaded in the new doc. Today, I open a new file and it opened with only a database para tag. I know some years ago, I created a sort of default file that included all the settings I wanted as a default value for any new project, backed up where Adobe me and baptized what Adobe me ID will look for when creating new documents.

  I thought that it would be default.indd but without SOAP.

  Can someone tell me the exact name and the folder where this file should be kept.

  Thank you very much

  Jon

  Create a file with all the styles that you want, save and close. With no file open in the Panel switch paragraph and Styles from the dropdown choose load all styles... Choose the file that you saved with your styles and load them, then close the ID and relaunch. All new files from the file > new... should have these styles.

  You can also save files empty (or non-empty) with any configuration page and the selection of styles predefined as InDesign templates. You access those via file > open...

• [ADF, JDev12.1.3] "Impossible to book the .lok for Integrated WebLogic Server (IntegratedWebLogicServer) file."

  Hallo,

  Sometimes my Jdeveloper breaks down and it is not possible more interact with it and the only solution for me is killed by the Windows Task Manager.

  When I open it again and I try to run an application THAT WLS cannot start and this message appears:

  It is not possible to reserve the .lok for Integrated WebLogic Server (IntegratedWebLogicServer) file.  In general, it is because another instance of this server is already running in the WebLogic domain (C:\Users\federico\.jdeveloper\system12.1.3.0.41.140521.1008\DefaultDomain).

  I tried also to stop WLS manually using the stopWebLogic batch file, but without success.

  The only thing that solves this problem is to restart the machine, but it's very annoying.

  You kindly help me?

  Thank you

  Federico

  Have you tried to simply remove the *.lok file?

  Once the file has disappeared, he should run again.

  If another process keep the lock, you can use tools such as unlocker to release the lock and remove the file after that.

  Timo

• XLIFF file format and use with JAVA API

  Hello
  
  We use BEEP version 5.6.3 in Oracle Applications 11.5.10.2 and we are developing some reports to be translated into 10 different languages. We are therefore very interested in XLIFF files but have some questions about the file format and the use of the JAVA API
  
  (A) FILE FORMAT
  Accuracy: we generate the XLF file in menu add-on BEEP in Winword MS used to build the RTF model
  (A - 1), the generated XLF file begins with:
  <? XML version = "1.0" encoding = "utf - 8"? >
  Can we change encoding to "ISO-8859-1' as soon as convert us the file format?
  
  A-2) section he < header > < skl > < file > internal - contains a huge chain that seeem to be binary... What is c? can delete us it?
  
  A-3) can you have a file XLF muliple < file > sections (one for each language translation)?
  This can be very useful for us to manage a translation only by a report model file.
  
  A-4) the most important section for translation is included in the tag < trans-unit >.
  Each of them has a separate as id "49e41f8f" '... '. Can we replace that with a larger significance?
  
  (A - 5) in the format of language is as "en-US" (area code + language code).
  It is case sensitive?
  
  (* B) THE USE OF XLIFF FILES WITH JAVA APIS *.
  We use the OPE "FOProcessor" class to generate the PDF providing:
  -Data generated by SQL report XML file
  -File XSL - FO, generated from the module BEEP in MS WINWORD RTF model
  -XLIFF file generated from RTF model by the module BEEP in MS WINWORD
  -The XLIFF file contains a file entry to translate the form English to French
  < file source = target language language "en-US" = "en - US" datatype = "OPE" original = "orphan.xlf" product-version = "orphan.xlf" - name of the product ="" > "
  
  Here is a summary of our java implementation class:
  
  Processor FOProcessor = new FOProcessor();
  processor.setData (sXmlDataFilepath);
  processor.setTemplate (sXslTemplateFilepath);
  processor.setOutput (sPdfOutputFilepath);
  processor.setOutputFormat (FOProcessor.FORMAT_PDF);
  processor.setLocale ("en - US");
  xInputXlfLang = new FileInputStream (sXlfLangFilepath);
  processor.setXLIFF (xInputXlfLang);
  try {}
  Processor.Generate ();
  }
  {} catch (XDOException e)
  e.printStackTrace ();
  }
  
  
  (variables beginning with "s" are path + names passed as arguments)
  
  
  The output PDF file is well generated, but not translated in French!
  
  (1) I missed something?
  What is wrong in my code or my XLIFF file?
  Y at - it a parameter to pass to allow the XLIFF translation (via setConfig)?
  With "setLocale" we indicate the target language, but how BEEP knows this current language is "en-US"?
  
  I found a few posts on the subject, but none with a clear solution. So if I managed to solve this problem, I think it can be very useful for many developers.
  
  Thanks in advance for your help.
  K.Helali
  
  Edited by: K.Helali Apr 26. 2010 01:56

  Hey,.

  I know what you're talking about.

  Do not make the rtf-> xsl in the office.

  Do it in java code.

  Use RTFprocessor, for her, just set the model and set the true extractxliff.

  move the xsl foprocessor.

  to do this

  (1) in the BEEP for MS Word
  1 - a) build the RTF model
  1-c) extract texts translateable to the XLF file

  (2) in BEEP Server (Linux Redhat, BEEP 5.6.3) included with the Oracle Applications 11.5.102
  (2 - a) write a java class that implements class FOProcessor (see code in my first post)
  I'm passing to the FOProcessor class
  -XML data file
  model model XSL - export RTF, file to the XSL using RTFprocessor file save it sub - (here in rtfprocessor.setextractXlifff - true)
  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e12693/Oracle/Apps/XDO/template/RTFProcessor.html
  -Translation (via the FOProcessor.setXLIFF method) XLF file

• file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  FWIW, do not change the extensions of file simply by copying the files to an external drive.

• differences in the use of a backup Favorites file ".json" and a file of bookmarks '.html '.

  Hi all
  What is the difference between the use of a backup Favorites file ".json" and a file of bookmarks ".html"? It seems that both of them do the same job. If this is the case, then why there are two options (.json and .html) to do the same job? If this isn't the case, then what is the reason for the availability of the two options and how are they different? Although I read the material, it didn't quite clear form me again. Please be so kind enough to elaborate on the question so that I can get a clear understanding of their good use (s).
  Thank you very much in advance for your time and skills

  Hello

  See questions/684284

• How can I disable the auto-hide known file attachments, and why are still on the 10 internet pages where I have to download something if I use firefo

  How can I disable the auto-hide known file attachments and why are they always about 10 Web pages where I have to download something when I use mozila firefox?

  Windows computer

  Ignore the link of the player Shockwave that probably, you mustn't he compared to Flash player because it is barely used nowadays.

  FredMcD, you really need correct/update your clipboard for that.

  The downloadable Shockwave player version (not flashing) is 12.1.3.153 and not 15.0.0.152 as you can be confusing which version of the flashplayer reached before.

  Flash player is 15.0.0.189 and not 14.0.0.179 as you can see at https://www.adobe.com/software/flash/about/

  Flash player is used for good Flash videos like Youtube and Flash games in Shockwave player is little used compared to Flash, for things such as games and online learning tools.

  And please, don't say "I asked. It's the way it is displayed on the site"as you said last time in https://support.mozilla.org/en-US/questions/1026518 , because who says little about why you're wrong ad versions and calling Shockwave player, Shockwave Flash.

• Firefox should display files .swf and .flv without Adobe. You can do it can't you?

  If the "Media Player Classic" program can read files .swf and .flv, programmers probably Firefox can do for those that did for .pdf files. PLEASE, I BEG YOU!

  Hello, mozilla is indeed working on it, but it is not an easy task...

  https://blog.Mozilla.org/research/2012/11/12/introducing-the-Shumway-open-SWF-runtime-project/