Import the audio files I have are not all sounds...

Similar Questions

• Cannot import the audio of any type in Flash CS6 Pro

  Hi all

  I have recorded voice over using hearing and try to import the audio files in Flash CS6 - the problem is that I get the error "one or more files were not imported because there was a problem to read the.

  I tried a multitude of various parameters during the recording of the hearing, including the types of alternative files, all with the same result.  To test yet, I tried to past audio recordings used in other flash videos and I get the same message.  Could someone post ideal settings so I can test that vs have to try each setting at random from there?  I'm running out of options (and sanity!) at this point.  Thank you

  RESOLVED - this issue has something to do with Windows 7.  I came across a thread where someone had a similar problem.

  Turns out that 64 - bit Windows 7 users MUST have Quicktime and iTunes installed for audio works correctly with hearing and Flash.  Flash gives constant problems without it.  Now if only Adobe would update their mistake so users understood what was happening and the resolution is as simple 20-minute download/installation of the e-mail software, life would be much easier for some of its user base.

  Hoping that it happens sooner rather than later.  Hope this post proves useful in the future

• Try to update 3.6.28 to 27, the imported bookmarks, library displays all the files in the proper order, but 99% are not at all in the toolbar.

  Jscher and Cor - el tried to help me a few years back, without success.
  Try again to spend 3.6 (XP) to 27 (Win7).
  3.6 has been exported as HTML file (also have json) and imported in 27.
  The last time, I never "found" most of my favorites in 27 FF. Especially not the files.
  This time, I tried the library view and it seems that everything is there, records, underwater, in order etc.
  BUT... Unlike in 3.6.28, I still only see the contents of a folder in the pane on the right at the same time.

       I can't work like that.
  

  THEN, maybe, I can access ALL my favorites another way (not via library)? Via a toolbar maybe?
  But for some reason, the collection in the toolbar doesn't resemble loosely organized collection, I see in the library. Virtually no record and in the chaotic order. A lot of absent it appears. If the content of the library was reflected in the toolbar (using AIOS), I was good to go. Should I wait? What can I try?
  Thank you!!!

  If the bookmark that should appear in the folder of Bookmarks Toolbar are not in this folder, but is perhaps in a second Bookmarks Toolbar folder in the folder Menu bookmarks then you can move (copy / paste) them yourself to the correct folder in the library.

• I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, even if the only files I have to use the old are the .xml, .itl.

  I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, although the only files I have to use the old are the .xml, .itl and current music files. Is this enough information to do it, and if so, how should I do?

  I lost the other information by following the instructions found online of other attempts. I have unfortunately seem to have lost all that concerns my old library with the exception of the foregoing. I have been using an external hard drive to make this attempt. When iTunes opens it is empty, and when you try to import the .xml I only get playlists, although there is nothing inside of them. It would not be the end of the world for me to start all over again, I've not lost music files, but loading in my all of my old info is much, much, much more desirable. Thank you!

  I'm sure that the sides are stored with the file of 80%. (wav mp3/4 whatever)---> or at least the should be!

  Just install itunes.

  Copy the contents of your old folder in the itunes directory and start itunes--> it will do the rest.

  PS...
  However, I wouldn't bother with itunes more... windows media player is pretty cool in 7, does all the same things.

  Personally I stick with the purchase of CD (mp3 downloads are a rip off)

  'Cool' apples, however, is not it... and what would we do without our podcasts (what happened to the embedded html objects I don't know) computer nerd who serves the grannies

• I made pdf file and added the audio file as a file embedded using acrobat pro 8, it works fine on pc (windows) when I move tab (android) the pdf file open but sound did not work. what I have to do to make it work

  I made pdf file and added the audio file as a file embedded using acrobat pro 8, it works fine on pc (windows) when I move to tab (android) the pdf file open but sound did not work. what I have to do to make it work

  Adobe Acrobat for Android or iOS software currently play any sound or video.

  -Dov

• Could not import the flash file in presenter

  I am running presenter 7.0 in PPT 2007. Other than the problem I have with a video file flash, it seems to work correctly.

  I created a flash video in Captivate (it is a demonstration of the short software), and I want to integrate it into a presentation using Presenter. But when I select "insert a swf file" tab in Adobe Presenter, I never have a chance to select the swf file I want.

  I expect a file at this point selection dialog box. Instead, I went to Internet Explorer and more, nothing happens.

  The flash file works fine as a stand-alone running in Internet Explorer.

  Is "Insert a swf file" the right way to add this video? Is there a better way to incorporate this Captivate video?

  A dead end I tried already: I looked at the description of the problem ' video import failed. Adobe Presenter 7.0.7', but this is not my problem. I'm running (not 7.0.7) 7.0, and the registry key mentioned on the Adobe Presenter support site (TreatFLVCheckWarningAsError) is not present on my computer.

  Thanks for your help.

  -George

  OK, I recommend all first that inquire through the Adobe update 7.0.6 or 7.0.7 via the download available to the public at http://www.adobe.com/products/presenter/.

  As for your question to import the flash file, if you use Captivate 5 or 5.5 he published in AS3 (ActionScript 3) only, and presenter 7.0.0 - 7.0.6 is an AS2 application. Therefore, your Captivate SWF files will not work in presenter. So, if you use Captivate 5 or newer, you must go to introduce 7.0.7 to SWFs to work.

  The problem you describe seems to me that you are working on a PPT file located on a shared drive. Presenter do not work with files that are not on your computer and will tend to not show the Insert Flash, video or Audio dialogs if the presentation is on a shared drive.

• problems to capture the audio layer when you import the m2ts files

  Hi all, I'm new on the side of the entire video editing and so would be grateful for the help.

  I just bought a camcorder Canon HF200 HD, and a Sony Vaio notebook that came with Premiere Elements 7.0 preinstalled.

  Last month I've been shooting sequences and down just to try to change everything and set up a DVD.

  The problem I have right now (and I've just started using the program, so everything is new for me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported by first - no audio (it reads the file ok, no errors appear, but when I go to review images there is video but no sound).

  I can play all my videos in Windows Media Player very well, both video and audio.  So it seems that my machine is able to read the files correctly in this program.  However, it seems that the audio drop out when I import the file in first.  The program was pre-installed on my computer and when I have a look at the audio settings, it doesn't seem to be a possibility to change the settings to something different.

  So far, I've spent a long time googling and trying to find a solution, but without any joy immediately.

  Enjoy the anyone can offer any assistance.  Is it just a simple setting I need to change?  Or I have to somehow convert the files in a different format before Elements 7.0 can read?

  Thank you.

  Jeff

  the machine I have appear to be consistent with the specifications required by PE7 (and given that it came with pre-installed PE7 which should be the case).

  There are two things to consider:

  1.) edition of most of the images, especially material to SD

  2.) editing AVCHD, currently the most demanding of all popular video formats to edit. That's what you have.

  Now when you launch the pre, you get a splash screen. There you can open new create a new project, open an existing project that has been recently opened, or open a project by browsing to it. We can also leave.

  In your case, you go again and when the dialog box opens, choose the preset for AVCHD w / DD 5.1 SS Audio.

  Also note, that in the Edit Mode, there are two Modes of display (access via two icons to the left of the lower panel), view timeline and sceneline view. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back, but the timeline view Mode will give you infinite control. It is estimated that change the most programs use, and most publishers use.

  Good luck

  Hunt

  PS - I highly recommend Steve Grisetti book, The Muvipix.com Guide to Adobe Premiere Elements 7

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

  Original title: speaker FOR desktop

  In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

  "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  How to solve this problem.

  Hello

  I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

  I would like to know some information:

  1. Have you tried to plug any other speakers or headphones?

  2. You did changes to the hardware/software before this problem?

  3. Have you tried using these speakers with another PC?

  Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

  Hope this information helps.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Please get back to us with an update on the issue, we will be happy to help you.

• I have lightroom 6 and just got a nikon d7200, lightroom now reads the tiff file so I can not download my pictures on lightroom

  I have lightroom 6 and just got a nikon d7200, lightroom now reads the tiff file so I can not download my pictures on lightroom

  You really produce TIFF files? If you are, no matter what version of LR read them. Files NAVE, not so much. For NEF files out of this camera, you can either upgrade to the latest 6.4 or CC 2015.4, or you can download the latest free Adobe DNG converter software and use it to convert your files to DNG and import those into LR 5.7.

  Back to TIFF format. If you are trying to import those and get a message that the files cannot be read. You will need to change the permissions on the folder that you copy the image to. Change the permissions if you have read and write access.

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• Could not import the .fla files

  Good evening friends,

  I can't import the files flash adobe flash professional cs6. The message I get is:

  "One or more files could not be imported because the problem occurred during the import"

  I need quick help.

  Thank you in advance.

  Ersin

  Fortunately, that said asymmetric is not correct, as well not be what you were asking about.

  You can open any FLA of CS5.5 or later, in any version, CS5.5, or later. At this time they did the files be future-proof. New feature does not work and could lead to problems, but the file should open ok.

  But back to what you asked, you would never import a FLA, then don't means you that you try to import a SWF file? They are sovereign, there's a number of Flash Pro version where the ability to import SWF has been removed. Not sure if including CS6. Nowadays you can import SWF files, but you wouldn't get the ActionScript code.

  If the SWF file is set to be protected, then that would also lead to errors. You are much better if you can find the original Florida

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• How to import the mp4 files, it does not work on my mac

  How to import the mp4 files, it does not work on my mac

  If you try to import a video to use as a guide in your timeline, the video must be H.264 with AAC audio. You cannot use the other MP4 videos with other codecs (such as the MPEG-4 video codec).

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>