Imported. MOV file is read in the very small edit section?

Similar Questions

• My MOV files to freeze during the download of my Canon T2i DSLR on my laptop HP - Vista

  I recently bought a digital camera Canon T2i with HD video.  I can download the pictures on my laptop HP with Windows Vista very well, however, when I try to upload the MOV files - it freezes in the middle and freezes also the functions of the computer and I have to perform a hard reboot.  I managed to download once out of many attempts, but when I tried to play the video it froze when I double clicked on the file.  Any ideas on what may be the problem?

  I recently bought a digital camera Canon T2i with HD video.  I can download the pictures on my laptop HP with Windows Vista very well, however, when I try to upload the MOV files - it freezes in the middle and freezes also the functions of the computer and I have to perform a hard reboot.  I managed to download once out of many attempts, but when I tried to play the video it froze when I double clicked on the file.  Any ideas on what may be the problem?

  =====================================
  Not really a definitive right answer... just some info...

  Have you tried to insert your memory card into a media
  drive and copy / paste the .mov files into a folder on your
  hard drive.

  Apple QuickTime .mov files require a compatible support
  Player... perhaps the following links will propose a few ideas:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  The components of the 3ivx decoder read
  most MP4, M4A, 3GP, MOV and AVI files
  with Audio MPEG-4 video and MPEG-4 AAC

  3ivx decoder
  http://www.3ivx.com/download/
  (this should make Windows Media Player compatible
  with the .mov files... I think that there is a 30 days trial version)

  Also... the following freeware players can play QuickTime .mov files.

  Apple QuickTime
  http://www.Apple.com/QuickTime/Download/

  QuickTime Alternative
  http://www.codecpackguide.com/quicktimealt.htm

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MPC-HC.sourceforge.NET/

  If you want to install a pack of codecs... one of the following
  may be worth a try:

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  CCCP (combined Community Codec Pack)
  http://CCCP-project.NET/

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  FWIW... it may be useful to convert .mov files
  to a different format.

  MOV is the format QuickTime from Apple and the
  Software «QuickTime 7 Pro» allows to convert MOV files...
  (this is the commercial version, not freeware)

  QuickTime 7 Pro
  http://store.Apple.com/us/product/D3381Z/A

  Instructions for the conversion of the .mov files are on
  page 42 of the .pdf document
  "Exporting files with QuickTime Pro".

  QuickTime 7.6 user guide
  http://images.Apple.com/QuickTime/PDF/QuickTime7_6_User_Guide.PDF

  Or... you can use the following to freeware
  convert .mov files to .avi format and
  import into Windows Movie Maker for
  combine them into a single video file .wmv or .avi.

  Pazera Free MOV to AVI Converter
  http://www.Pazera-software.com/products/mov-to-AVI-Converter/
  (click on the blue Download button not the Red)

  The name of the file that you download is:
  'Pazera_Free_MOV_to_AVI_Converter.zip '.

  After you download... Unzip and open the program...
  (no installation required)

  Drag and drop one or several .mov files...

  Choose an output directory...

  Select... WMV AVI - Video Codec - version 1 (WMP 7)...

  Convert... (the button is on the top tool bar)

  When the file is converted, you can change it in
  Windows Movie Maker. Simply open Movie Maker
  and go... File / import into Collections... and
  Access your converted file.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• First 13 items ceased to import MOV. files. QuickTime is installed and running

  First 13 items ceased to import MOV. files. QuickTime is installed and running.

  Now

  Big, big news.

  All the symptoms have been pointing to the need for the latest version of QuickTime installed, so I'm very happy that you have worked through this detail to get to your success. Excellent job of tracking that will be appreciated by all.

  We hope that your Christmas and new year are filled with all the best.

  RTA

• No sound on the imported .mov files

  Since WMP on Vista does not recognize the .mov file formats I had Dell technical support install pack of 495 s K-lite codec. Now I can open and read files .mov (imported from a digital camera KODAK Z710), but there is no sound. The speakers are very well, all the other videos from the internet do not have an audio problem, nor play CD and DVD have audio problems. Only files .mov that came from my camera do not play sound. Dell support diagnosed my computer and it works perfectly diagnosed. They said that it is a problem of 3rd party. I spoke in support of KODAK, but they can not help me with a computer problem. BTW, his play on the camera itself.
  I am at a loss. I have been around surfing the net for hours and hours, but did not finde any solution, just many similar problems.
  Nobody knows how to solve this problem without me needing a degree in computer science? Thank you.

  Since WMP on Vista does not recognize the .mov file formats I had Dell technical support install pack of 495 s K-lite codec. Now I can open and read files .mov (imported from a digital camera KODAK Z710), but there is no sound. The speakers are very well, all the other videos from the internet do not have an audio problem, nor play CD and DVD have audio problems. Only files .mov that came from my camera do not play sound. Dell support diagnosed my computer and it works perfectly diagnosed. They said that it is a problem of 3rd party. I spoke in support of KODAK, but they can not help me with a computer problem. BTW, his play on the camera itself.
  I am at a loss. I have been around surfing the net for hours and hours, but did not finde any solution, just many similar problems.
  Nobody knows how to solve this problem without me needing a degree in computer science? Thank you.

  ========================================
  Windows Media Player is not a good choice to play .mov files.

  .mov is the Apple QuickTime format... so would be the best player
  Apple Quick Time player being... I suspect a copy provided with your
  camera.

  The free VLC Media Player can also be worth a try.

  VLC Media Player
  http://www.videolan.org/

  Best bet IMHO... convert the .mov to .avi using the free Panzera
  MOV to AVI. Then you can read the files in most of the media
  Player and if you ever decide to use Movie Maker, they'll work here
  also.

  Pazera Free MOV to AVI Converter
  http://www.Pazera-software.com/products/mov-to-AVI-Converter/

  After you download... Open the program...
  (no installation required)

  Drag and drop one or several .mov files...

  Choose an output directory...

  Select... WMV AVI - Video Codec - version 1 (WMP 7)...

  Convert...

  John Inzer - MS - MVP - digital media experience

• Why the Mac (Adobe Revel) app support import mov files?

  Mov files are grey-out when I am tempted to choose to import.

  The Mac app version 1.10 is released before that we supported the video, this is why you see a fixed version of your video there. We have released video first on iPhone/iPad and adoberevel.com.

  Guinot

• New to first Pro - imported .mov file is smaller than the default size of the project

  I imported a low quality .mov file that I am trying to change. It is about 380 x 160 (per here) and default is 720 xx.

  Is it possible to resize the project so that it matches my mov file?

  I don't want to export the video with a huge black screen around it.

  Thank you!

  Use the desktop for your sequence settings.

• Cannot import mov files in AE.

  This problem appeared from time to time. It causes several things that I can't do in my After Effect, but I really have no idea how I can solve this problem.

  Problem 1: wait long to open the AE, it hangs on the core of media initialization and takes about 10-15 minutes to get through.

  Problem 2: impossible to import the mov files and if I import the mov to the AE project, this pop-up comes

  "After effects error: file 'file name.mov' cannot be imported - this 'MooV file is damaged or not supported". ".

  Problem 3: cannot display the model as mov. and just this pop up global warming

  "After Effects: one of the output modules could not be imported." It has been reset to use the default setting for the selected file format. »

  I read a few threads, and I knew this could cause communication blocked between AE and QT. But I check my QT, it's version 7.6.6 and I have installed firewall software, communication is therefore correct (I guess, since I can play normally mov file and not the home warm message that "QuickTime is not installed on this system...) »).

  Another thread said may because of the tripartite component in the QT library. This may seem reasonable, cause I install certain converters to convert before wmv and avi formats.

  Here are the components of the QT library:

  AviImporter.component

  FFusion.component

  iChatTheaterPreview.component

  IMXCodec.component

  XviD_Codec.component

  ------------------------------------------------------------------------------------------ ----

  ↑↑ The component 5 above I move out them, but no luck yet ↑↑

  ------------------------------------------------------------------------------------------ ----

  AppleAVCIntraCodec.component

  AppleHDVCodec.component

  AppleIntermediateCodec.component

  AppleMPEG2Codec.component

  AppleProResCodec.component

  DesktopVideoOut.component

  DVCPROHDCodec.component

  DVCPROHDMuxer.component

  DVCPROHDVideoDigitizer.component

  DVCPROHDVideoOutput.component

  DVCPROHDVideoOutputClock.component

  DVCPROHDVideoOutputCodec.component

  422.en FCP uncompressed component

  LiveType.component

  Could someone give me some advise in respect to these problems and is it component above I should move away.  DEL. \ /.

  Thank you very much in advance for all your help and advise, who really appreciate! Thank you!

  Donna

  ------------------------------------------------------------------------------------------ ----

  Here is some background information on my mac:

  Mac OS x 10.6.8

  2 x 3 GHz Dual - Core Intel Xeon

  8 GB memory

  AE CS5

  QuickTime Player 7 version 7.6.6

  ------------------------------------------------------------------------------------------ ----

  I had the same problem, and so far, this solution worked for me. (touch wood)

  Try to set your default player for QuickTime .mov files.  (Mine has been set to Windows Media Player)

  • Right-click on one of the mov files that you encounter a problem at the opening in AE.
  • Select 'Open with' and select 'choose program by default... "downstairs.
  • Select Quick Time. (Make sure the "Always use the selected program to open this kind of file" is checked).
  • Restart your computer.
  • Open AE and see if it works.

• Trying to import mov a folder selected in the first.

  I have a script that prompts the user to select a folder containing some mov files to import. Once the selected folder first passes through the import process, but at the end of import, an error message appears saying "Unsupported format or corrupted file.»

  I know that the mov is good because I can drag them into the project very well.

  Here is my code:

  var app.project = proj;

  var binName = "batch files";  Find or create a target location.

  var targetBin = searchForBinWithName (binName);

  If (targetBin == 0) {}

  app.project.rootItem.createBin (binName);

  }

  If (proj! = null) {}

  targetBin = searchForBinWithName (binName);

  targetBin.select ();

  var movLocation = Folder.selectDialog ("Select folder containing the files to import", 0, true);

  var filesArray = movLocation.getFiles ("mov");

  If (movLocation! = null) {}

  var import_these = new Array;  We have an array of file objects; importFiles() takes an array of paths.

  for (var i = 0; i < movLocation.length; i ++) {}

  filesArray [i] is movLocation [i] .fsName;.

  }

  proj.importFiles (filesArray);

  }

  }

  function searchForBinWithName (name) {}

  var numItemsAtRoot = app.project.rootItem.children.numItems;

  var foundBin = 0;

  for (var i = 0; i < numItemsAtRoot & & foundBin == 0; i ++) {}

  currentItem var = app.project.rootItem.children [i];

  If (currentItem! = null & & currentItem.name == binName) {}

  foundBin = currentItem;

  }

  }

  Return foundBin;

  }

  Thanks Bruce...

  I realized what the problem was. When I used getFiles(), he got the path of the object but lacked "/ Volume /" since the beginning of the path for a reason any. I had to scroll down the table of files and use .fsName to get the full path. To do this, I changed the code and it worked:

  var movLocation = Folder.selectDialog ("Select folder containing the files to import", 0, true);

  var filesArray = movLocation.getFiles ("mov");

  If (movLocation! = null) {}

  var filesToImport = new Array();

  for (var i = 0; i)< filesarray="" .length;="" i++)="">

  filesToImport.push (filesArray [i] .fsName);

  }

  proj.importFiles (filesToImport);

  }

• import .mov files in pictures for Mac?

  I took a few videos a short holiday with my digital camera. Saved on my EyeFi Mobi card before sending them on my iPad.

  Now that I'm Home I want to import videos into pictures on my iMac.

  I sent them from my iPad to my iMac via AirDrop. But I'm having trouble getting the files. When I open them a black box appears which says conversion. They seem to be JPEG files now, not the MOV files.

  I want to import these movies Photos for Mac, but I'm stuck.

  Any suggestions?

  Thank you

  Connect the iPad to your Mac with USB cable and use Image Capture to download video files to iPad.  Make sure they are playable in Quicktime player and then import them into your library.

  

• Import mov files in PP - video won't load, audio only

  Hi friends

  I have .mov files exported from FCPX. The codec is dvh5. When I import to the first, the video will not show or listen to samples. Audio is fine. I tried Adobe Media Encoder, but same problem there - no video preview, no video export. Also, the same files play on QuickTime. I'm on Mac.

  Grateful for any ideas

  Please try this handbrake.

  Thank you

  Ilyes Singh

• No sound when you import .mov files in PPCC

  Hello

  I'm almost at the end of my rope.  I'm working on a project that uses .mov files.  Problem is that every time that I import them into the bin, no audio appears (not even in the preview window).  I tried to use the media encoder to make a copy of the files to .mp3 and .wav format, but the files just released silent.  None of the waveforms or whatever it is.  Then I tried to encode as Quicktime, PP does not recognize the file type.  I am now at a loss.  Honestly, I don't have a problem with it until this last update.  Any suggestions would be greatly appreciated.

  I installed filmic Pro on my iPhone and pulled two clips, one with AAC audio and the other with audio AIFF. Of course, one with audio AIFF lost audio when importing Premiere Pro and still when I dragged into Media Encoder. Seems to be a bug that's worth logging: feature request/Bug Report Form

  Could be a problem with film recording Pro with audio AIFF, could be a problem elsewhere.

  Moral of the story for filmmakers: always test your workflow before shooting. (This should not be a new morality either.)

• Create folders and move files by reading csv

  Hello guys,.

  That can create a script to read csv and create folders and move files into the folder.

  My csv will look like

  

  There the names of folders and file names, I kept my files (Mention in the 'File name' column) in the office. When I run the script it must read the csv file and create the folder (depending on the "folder names") and the correct file must move in the particular folder. Hope I have clear requirements.

  So we need 4 above csv files and the respective files must travel in their records. Need help!

  Thing may have changed as I've tested with CS6.

  Please try then.

  #target photoshop;
  main();
  function main(){
  var csv = File.openDialog("Please select CSV file.","CSV File:*.csv");
  if(csv == null) return;
  var sourceFolder = Folder.selectDialog( "Please select source folder");
  if(sourceFolder == null) return;
  var data=[];
  csv.open('r');
  while(!csv.eof){
  var InputLine = csv.readln();
  if(InputLine.length > 3) data.push(InputLine);
  }
  csv.close();
  for(var f in data){
  var dataLine = data[f].split(',');
  var folderName = dataLine[0].toString().replace(/^\s+|\s+$/g,'');
  var fileName = dataLine[1].toString().replace(/^\s+|\s+$/g,'');
  var file = File(sourceFolder + "/" + fileName);
  if(!file.exists) continue;
  var outputFolder = Folder(sourceFolder + "/" + folderName);
  if(!outputFolder.exists) outputFolder.create();
  if(file.copy(outputFolder + "/" + fileName)) file.remove();
      }
  alert("All Completed");
  };
  

• Import video files Canon duplication in the course?

  We have recently improved first Pro cs6 to CC.  Now, for some reason when I try to import my Canon. MXF files on my CF card they create duplicates of 6-8 per movie.  Anyone who is familiar with the problem and how to solve?  Thank you!

  Hi JL5566FL,

  Welcome to the forums.

  Please move the .xml files created in the folder where you have the clips to another location. You need to clean up files created by first on the initial import .cfa and .pek .xmp. .Cfa and .pek files in the cache of media so just clean the folder cache media. The xmp file will be in the folder where are the clips. Also, uncheck the "write xmp IDs to files on import" option to preferences > media... I hope this helps.

  Kind regards

  Vinay

• Only Audio stereo imported .mov file plays in 1 channel

  Hello:

  Only, I imported a .mov file, which, when you look at its properties, said that the Audio is STEREO at 48000 Hz. Yet, when I play it, the sound comes only from 1 channel and the other speaker is silent.  I looked everywhere in the forum to find answers, but none of them seem to work.  Basically, I want to just duplicate the left channel and copy it to the right channel, so the same sound can be heard from two speakers.  (I think that the person who registered used a mono microphone and somehow he went alone to one of the stereo channels).

  Any ideas?

  Use the audio effect of fill (right or left). This will duplicate the right channel on the vacuum.

• How can I move files system recovery to the original location?

  I use Windows 7 on a HP Pavilion P6000 series.  I believe that the Recovery Manager created Windows System Recovery Files folder on the C: drive (from .wim files) created on an external drive, and I want to move them to the original location.  Just copy or move everything to the C: drive, or is it an executable program that does this?

  Found this previous post - I guess that's the solution...

  Re: How to restore the system recovery files to their original location? (HP Pavilion p6540F desktop

  201207 04-18: 12:00 - modified on 18-04-201207:13 PM

  The backup that is used to recover only restores the files in a folder, leaving the owner to move. I agree, not the application of backup more useful, but better than nothing I guess.