Imported P2/MXF audio files - cannot apply audio effects?

Similar Questions

• cannot apply the workspace of lighting effects because the disk is not available. I use Photoshop cc 2015 on OS 10.11.3

  I use Photoshop cc 2015. When I go to render the lightig effects, I get a message saying 'cannot apply lighting effects workspace because the disk is not available. I'm running on OS 10.11.3 system

  Any ideas?

  Hi Mary,

  Please take a look at the following link: Optimize performance Adobe Photoshop CC and try the steps.

  Once done, see if you still get the same error.

  Concerning

  Tanuj

• I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  Wild guess: I forgot to patch source the video track.

• The selected file cannot be linked because there 6 audio channels, and the clip was created with 2

  I tried to link the MTS files to a project that I have edited with AVI files. I got the message "the selected file cannot be bound because it has 6 audio channels and clip was created with channel 2/channel" audio. Does anyone know what I need to do?

  I had this problem and the cause in my case, it was that I changed all my clips in the project are mono audio channels. When I tried to swap the originals with proxies, I did, I had a similar message for the clips that have been affected by the designation of channels. I opened the project and selected all my media items in the project window and changed all the audio back to 'use the file' and that did the trick for me.

• No opening of the hearing of the MXF audio

  I am trying to edit the audio of my Sony PXW-Z150.  It is 1080 video with 4 audio channels in a file, .mxf.  It opens fine in the first, but when I try to open the file in Audition, I get an error that an "unknown exception has been captured (Code 00000000)."  I hit OK and an audio file window opens (with four channels), but it is empty.  In the files Panel, the name of the file appears with (cancelled) appended to the name.  If I close the file, I get a different dialog box in the Editor window that says "the file 'Clip0002.MXF' contains the video only and cannot be changed. To view the video, insert the file into a multitrack session. »

  It gives me just the video track - no sound.

  Any ideas?

  Thanks for the test file, Ola.  I downloaded office and confirmed that I could reproduce the problem in the current version of the hearing and I am pleased to announce that its opening without problem in the next version, time very, very soon.  If you want to confirm, I just sent two invitations for the preliminary program private Audition.  There, you will be able to download a preview of the next version and check that you no longer see the code error or problems to import the MXF format.

  Thank you!

  Durin

• Import. MXF in Premiere Pro files

  I have Premiere Pro CS6 on a Mac, and I'm trying to import. MXF files of a F5 Sony directly in the project. What is Premiere Pro CS6 intended to support. MXF natively, and if not, what is the process to import in my project?

  I found finally get around it!

  .. for anyone else who has trouble!

  You need to download the Apple's ProRes codec pack:

  Formats of video Pro 2.0.1

  (You cannot install this without going through a ProApp, then you also need to download http://www.timdoug.com/unpkg/ and follow the steps in this video to decompress the content).

  However, this is where I got stuck.

  You must copy and paste individually each .component and .bundle file in the unzipped contents and paste them into the library / result of the Quicktime file that will give you the following:

  

  4 hours of searching, for once, comes to a positive end.

  I can now start my work day!

• Having problems adding audio effects to a .mp3 file

  Hello

  I have a "Preset" I did which makes the person talking as it comes through a phone.  I've used this preset many times but I came across a file that does not allow me to apply it.  I tested it on other .mp3 files in this project and it attaches very well.  Then I tried just apply an audio effect to this troubled file and nothing emerges from it.  Any ideas why this happens?  I have need for it convert a .amr in .mp3, but the file plays fine.

  Thank you

  Rich

  That's all... I needed to change mono to stereo files.  Cool.

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

  original title: codec

  I have windows vista Home premium.  I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

  ... How to install appropriate codec

  There is an excellent set of codecs available here.

• When I import a video, audio can be moved to the Timeline!

  Hi, I used adobe first for years. and I'm on Premiere pro CC now (on laptop)

  recently (perhaps after an update), I realized that the videos are imported with the Audio icon only (and not in video + audio) and when I drag it to the audio only timeline appears.

  This video shows the problem...

  Adob first CC video problem - YouTube

  the first is updated and the NVIDIA GPU also and the machine is switched on 10 Windows.

  Please help me because I am working on a very important project.

  You have turned off the video track targeting:

  

  Click the V1 to turn it on. It will be blue when switch on.

  MtD

• Nikon 610 Raw files cannot be imported. Please help (JPEG files work) Version 5.2

  I just purchased Lightroom Version 5.2 and cannot import the *. NEF files.  Very frustrated. Can anyone help?

  You should be able to download the latest version of L5.x of

  Adobe - Lightroom: For Macintosh

  Adobe - Lightroom: For Windows

• Issue export - export file cannot "convert".

  Hi all

  I currently have problems with the export of a project. I have this wedding video of 50 minutes that I'm trying to export which continues to fail whenever I try to do. I turned the project with two Canon 70dB and a Canon T3i so all the imported videos were .mov files. Most of the audio has been directly the camera mixed with a few audio zoom that I connected to the Palestinian Authority. Now, for most of the video files were shot at 30 frames per second and my second cameraman accidentally shot a few shots at 60 fps. Now, this is where I guess that is where the problem is from, but I don't understand why because the video of "Star" (editing), I created uses some of the same videos (including some with different FPS) and exported very well with H.264, 1920 x 1080. Anyway, when I go to the export of this sequence, after taking about 2.5 hours to export in the 1920 x 1080 H.264 format, file looks as if she has successfully exported. Once I go to the file and click on it, a QuickTime 'conversion' window appears which is quickly followed with a message "cannot open file." Has anyone had a similar problem? If so, please help! I'm supposed to send this video to the couple of tomorrow and I am short on time

  Hey everyone, so I put 1020x780p instead of H.264 QuickTime export settings and that seemed to fix it. Thanks for all the help. You guys are life savers.

• Voiceover first clip of bad quality, after export only. Audio effects involved. How can I fix it?

  All the sound quality is as desired in the timeline panel during the first edition. After export, the first clip in voice-over ONLY, now has a dominant white fuzzy noise. If I delete this clip and export, the clip that was the second, but now first, inherits the problem.

  The video below has the original "first music video" removed, to show that the problem persists in the new video for first, which was previously the second and previously sounded very good. Each "phrase" or an "expression" is on his own audio clip, on the same track.

  Also note that the sound quality of the music is great in each. In addition, the quality of the voice is perfectly fine in all the remaining 3 minutes of video.

  From what I can tell, it's like audio effects have not been applied to the item first, after export. I use DeNoiser, dynamics and Volume of the channel in the whole of the audio track of the set (as opposed to each individual clip) voice. When I apply effects to each of the first 3 clips and place them on a separate track, and export, all 3 clips have the problem of white noise.

  I guess that the effects take some time to 'register' and so when effects are applied to the entire track this should happen only once. But just who does not sense that this is a permanent problem or every video ever made by creating using DeNoiser and dynamics would have this problem!

  What Miss me? There must be a way to solve this problem.

  Here is a screenshot:

  

  I use version creative Cloud, Adobe first Pro CC 2015

  I exported with the following parameters:

  H.264

  Format AAC, AAC Codec (tried MPEG and Dolby as well)

  48000 Hz

  Stereo (tried MONO as well)

  High quality

  320 kbps bitrate

  Bitrate priority

  Make maximum use

  
  

  Thank you.
  

  WORKAROUND SOLUTION:

  I used both your advice to a solution that WORKS. Simply, I moved all the audio on this track 5 seconds back and insert an audio clip arbitrary at the beginning of the track. I then exported audio on one. WAV file. I imported the. WAV file in the project and trim the beginning (with the arbitrary clip) back to what is supposed to be the beginning of the audio.

  The arbitrary clip inherited the problem and the remaining clips are great. They reside on a track that has no effects applied, as the. WAV files retain the proper sound quality.

  Also, I've read just after this operation that checking the box "Freeze" can cause the denoiser to apply instantly. I've never tried, but if it works, it's probably a simpler solution.

  Thank you.

• "A number of queued files cannot be read" when you try to play music in Windows media player

  Original title: don't play the music from the playlist

  I have Windows 7/WMV 12... I can't read mp3 playlist, it shows some msg as "a number of queued files cannot be read, to find information about the problem, click on the icon next to each file in the list pane". Help me

  Hi John,

  -What is the exact error message that you receive?

  -Were there any changes made to the computer before the show?

  I would suggest trying the following steps and check.

  Method 1:

  Run the troubleshooters and check if the problem persists.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  If the problem persists, then follow the steps in the following methods.

  Method 2:

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player .
  2. click on Start, click run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
  3. Select all the files in the folder, and then click delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  4. restart Windows Media Player.
  Note: Windows Media Player automatically rebuilds the database.

  Method 3:

  Update the audio drivers.

  In some cases, you may encounter this error message if there is a problem with the audio device, such as a map his or her controller. For example, you can get this problem if your audio device requires an updated driver. Visit the website of the manufacturer of the audio device and get the latest driver to resolve the problem.

  Updated a hardware driver that is not working properly http://windows.microsoft.com/en-us/windows7/update-a-driver-for-hardware-that-isn ' t-working-well let us know the result.

• Audio spectrum effect works is not the rendering of audio effects

  The Audio Spectrum effect seems to work on the rendered audio effects.

  For example, I have a very simple model with 2 layers:

  1. A solid including the Audio Spectrum effect
  2. An audio file referenced by the Audio spectrum

  The audio spectrum works as expected with the audio file, however, when I apply a ' Audio > tone "to the audio layer (which completely changes the waveform), the spectrum Audio sound effect changes at all."  I tried motorhomes audio layer to cook in the effect of the tone, but results are inconsistent, as the RAM first look seems to work, but then any changes made to the demo seems to have no effect.

  Are there other ways to do (other than export the audio file, which is too rigid of a workflow), or perhaps an audio made flag any miss me?  THX.

  Thanks for the reply, although purge the cache of the images didn't work.

  Before, I was already composing, but any changes made to the demo did not if register on the Audio spectrum in the main computer, and unfortunately, purge the cache of the images did not work.  But it made me think how cache for audio may differ from the image being cached internally within AFX, so I tried purge 'All memory'... but that no longer works.

  However, a "Disk Cache" purge worked (although it takes much longer).  I'm guessing that he may have something to do with the way that audio is staged in the Disk Cache RAM Preview?  Anyway, it's a little tedious workflow of having to constantly purge disk cache after each change of the effects on the audio, but it's certainly better than every time the export of audio files.

  I hope it's one of those issues that gets patched on the line.  Pointing me to a kind of purge helped well, so thx for the comments!