Audio spectrum effect works is not the rendering of audio effects

Similar Questions

• I have tossiba laptop when I try music on my laptop speaker works but not the headphones work even not pregnant

  I tossiba laptope when I try music on my laptop speaker works but not the headphones speakers not even extra work

  Hi rajuarman,

  -Headset works fine on other computers?

  -Have you installed the audio drivers on your computer?

  -Not the problem only occurs when trying to play music in Internet Explorer?

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  Please see How to ask questions and provide the information required to help others.

  In the meantime, check out these articles:

  Tips for solving common audio problems

  No sound in Windows

• is there an alternative photo management system that works (and NOT the pictures)

  Y at - it another app that works better than the pictures, that we can use to manage the photos, because they took iPhoto and replaced it with pictures?  Is there a way just to import photos and save them to your computer in folders, as you would on a Windows system? And then maybe just use Picasso or something?

  You can still use iPhoto if you are eligible:

  Terence Devlin

  April 14, 2015 14:21

  Re: Iphoto's gone? I want to go back!

  Go to the App Store and check out the shopping list. If iPhoto is there then it will be v9.6.1

  If it's there, then drag your existing iPhoto application (not the library, just the app) in the trash

  Install the application on the App Store.

  IPhoto is sometimes not visible on the shopping list. It may be hidden. See this article for more details on how to view it.

  http://support.Apple.com/kb/HT4928

  A question often asked: Will I lose my Photos if I reinstall?

  iPhoto, the application and the iPhoto library are two different parts of the iPhoto program. So, reinstall the application should not affect the library. BUT you should always have a back up before doing this kind of work. Always.

• ProBook 6570b: screen brightness works do not, the unknown device on PCI

  Hello

  I have a Probook 6570 b with processor i5 here. He is running on W7 x 64 professional. As in all computers, we decided to replace the hard drive for an SSD. After replacing the hard drive and reinstallig W7 and drivers, there is a problem that I can't fix. It seems that I can't get the Fn keys for brightness screen work. The others work, volume gives a nice popup, evenso buttons additional display.

  Unplug the power supply makes the screen dim brightness. Who works. In the energy configuration screen, I can also adjust the screen brightness properly. Only the driver for F9 and F10 does not work.

  I don't know if it's related, but in Device Manager, I get an unknown device on a PCI bus. I have not been successful in finding drivers for this one as well. In the detailed tab, it says: * HPQ6000

  Thanks for responding!

  Hello:

  The 6000 HPQ needs this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_124200_1&swEnvOid=4059

  Have you installed the graphics driver and hotkey?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_129672_1&swEnvOid=4059

  I can't give you the graphics driver because your laptop can come with 2 different graphic configurations.

• try to install OTA, bb poster it works but not the app download page

  I pushed the app to Web server, flies over the pot here

  and cod files, jar file, and when I point to the .jad with my bb browser file,

  It shows a screen that says

  It works!

  but it's not the confirmation page to download and install the application

  mime types are confirmed to be correct on the Web server (with firefox)

  what the hell could I do it wrong?

  It is hosted in a https connection, but that shouldn't make a difference

  Origin of the text "it works!"?

  Kindof looks like a test page default for the web server.

  You have your types JAD is set incorrectly, or you have the incorrect URL.

• Can send via Apple Mail to work, but not the House

  I have a problem that lasts for 3 years, on both machines (a Mavericks and now El Capitan).

  Sometimes Apple Mail smtp server sends a message when I'm home, sometimes not. Sometimes, I've updated the smtp settings to add a server and change some thing, then Mail wouldn't send when I'm at work.

  I asked CE Office at work, they do not know what is happening and gave me what should be the right settings.

  I'm about two seconds of dumping Apple Mail for good, if I can find another application that's all good.

  Thank you.

  Hello

  Open the application Mail of Mac then go to the menu bar and click window > connection doctor

  Use Mail connection doctor

• USB ports not working do not (the PARAMETER IS INCORRECT)

  Hi, I have a Dell Inspiron 531 and I had a lot of problems with my USB ports on my tour. I have 4 GB of RAM with a 3 GHz Proccessor:

  When I plug in a device, it is said, "new Harware found.  I click "locate and install driver software (recommended)" and click on continue. He said "the parameter is incorrect."
  
  
  Please someone HELP me I've LOST £130 on a gamepad THAT DOES NOT WORK! Please someone HELP! Thank you

  See if it helps:

  Windows Vista / USB device detection issues
  http://www.thedave.ca/geek/Windows-Vista-USB-device-detection-problems/

• HP Deskjet 3054: Printer works but not the Scanner (device not found)

  Configuration: Windows 8 Lap Top with a HP Deskjet 3054 directly connected via USB

  Printer - it works

  Scanner - when you run the Application "Hp Scan and capture ' it comes back and says"device not found ".

  I tried - I ran 'HP print and scan doctor '.   Everything is OK except the "HP Scan".  He said that it was not able to find the HP Scan software on my computer.   When I went on HP customer support site to download it, I couldn't find it.  There is nothing that I could see which says "HP scanning software".   So this software HP Deskjet full functionality and drivers what I should download and install?

  BTW, the "HP Scan and Capture" application allows to work perfectly.  Not sure why it isn't now.

  Hello

  When changed the type of network to a USB connection? scanning HP and Capture app support network scanners, it does support a USB connected device:

  http://support.HP.com/us-en/document/c03478505

  In the HP Deskjet 3050 software select scan a Document or Photo and check if this can work...

  If the same persists, unplug the USB, uninstall the HP Deskjet 3050 basic software drivers from programs and features, then download and reinstall the most comprehensive software features again.

  If you prefer to continue to use the HP Scan application capture &, open the HP Deskjet 3050 software, click the utilities tab, click the printer installation software & and select Convert USB wireless to connect the printer to your network. then the Scan & Capture app should detect the scanner.

  Shlomi

• Web interface works is not the well-known address of management

  TLDR:

  • opening webinterface on ip management group-> does not work / ping
  • opening webinterface on eql management ip-> works
  • opening webinterface on ip management group-> suddenly done work
  • Why?

  Yesterday I've updated SanHQ of 2.2 to 3.0.1 to prepare to run the path to upgrade to FW 7.x. Since yesterday, I get the following warning:

  [ID: 1.6] The eql-grp01 group has been added using non well known address (MWKA). Delete and add the group using the well-known address of management of group 172.16.0.9.

  The eql-grp01 group contains a single EQL (eql01 / 172.16.3.15) and has a dedicated management port. The beach is a 16, as such, both the IP and IP management EQL management group are in the same network (again).

  I'm able to reach the Web interface of eql01 on 172.16.3.15 without problems for years. Try to reach the Web interface on 172.16.0.9 has always given problems (timeout, ping works however) until I asked the Web interface on 172.16.3.15, after that, I can reach the Web interface without problems on 172.16.0.9.

  Up until now I did not worth to look into it, but as I'll be add another Member to the group within a few weeks and SanHQ's "tenacious" on do not use well-known management IP address I have tought I might give it a try here, maybe it's the behavior?

  Edit: Adjusted the subject as non-MWKA does not work but the MWKA (submits sugested otherwise)

  OK, you need remove the SANHQ and add in it through the Well Known management address.

  I don't know why he first had to go to the Member port Mgmt vs being able to use the IP alias for group management.

  That's all the management IP address is, like the IP address of the ISCSI discovery.  It is a superior a physical port IP alias.   So if you can reach the Member IP address, you will have no problem reaching the alias.

  Maybe something on your network, or the ARP table has not been updated.

• HP Photosmart PSC 2410xi: installing printing HP PSC 2410xi Photosmart IP router works, but not the function of scan

  I just install my HP PSC 2410xi Photosmart all-in-one for IP printing via my new usaing Asus RT - 16 Wireless Router the router USB 2 connections, and it prints perfectly for my custom pc company installation Windows 7 64 ultimate.

  But I can't get either Windows "Fax and Scan", "Digitization management", or my image of 3rd party software to recognize the flat bed scanner with this installation, because there seems to be no separate "Device" option that can be selected for the parameter of the intellectual property of scanning, only for the "HP psc 2400 series", than Windows easily reconizes for direct installation of USB device , "offline".

  Also, if I try to select the option of "HP psc 2400 series" IP for scanning with my 3rd party software, and any choice of Twain and WIA driver is grayed out, so it can not create the profile in order to USE the scan function. And try to create a port separate Windows for the scanner function only, using the same IP address, only you will get an IP conflict problem, not creating a separate port works, anyway.

  Is there a way to get the dumpster to function to work through my router IP to analysis, or will I have to change my USB cable from the router to my pc using the offline option USB hub, whenever I need to analyze something?

  I must point out, that I still have to use the popular tomato, DD - Wrt, or Firmware of Merlin for extras, as a newbie, I just use the official Asus Firmware (last updated), for now.  Thank you.

  Hey @technosey,

  Welcome to the HP forums!

  I see that you are having problems with your PSC 2410xi scanning on your Windows PC. I can help with that.

  First of all, I see that you have the printer plugged into a USB port on your router. Which can cause a lot of problems and it would be better to plug directly into your PC. Once done you will add a printer via a local connection, rather than via a network connection.

  Then, using this printer on Windows 7 Enterprise is going to be difficult because there is no driver available for this operating system. I found a document but that can help you troubleshoot. Install your printer using the Windows built-in driver

  If this information helped you to scan then please let others know by clicking on accept as a Solution.

  I hope this helps and I hope you have a great rest of your day!

• ACS WORKS, BUT NOT THE GRAPHIC WEB INTERFACE

  I have a worm ACS 5.4.0.46.7 running on a device, ACS-1121-K9. After the restart of a Win2008 controller it has stopped working and someone in my Department and restarted the ACS. It seems that authentications are working now, but I can't access the web gui. It answers ping and ssh. I did a web show acs-config-Interface and the display Interface has been disabled, I allowed him but it still does not work:

  TBGACS02 / admin # show interface web-config-acs
  interface of migration is disabled
  the UCP interface is disabled
  display interface is enabled
  REST interface is disabled

  TBGACS02 / admin # display the status of the acs application

  Role of the ACS: PRIMARY

  Process of database ' ' running
  Treat the race of 'management' (HTTP is insensitive)
  Unguarded "runtime" process
  "Adclient" process running
  'Ntpd' running process
  "View-database" running process
  The "view-jobmanager" process execution failed
  "View-alertmanager' running process
  "Notice-collector' running process
  "View-logprocessor' running process

  I could try to restart again, but I'd rather not if possible...

  Hello

  Can you try 'application acs stop' and then start CSA application and see if that solves the problem?

  If this isn't the case, then I suggest to take a show technician and support bundle, prosecute with TAC.

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• Using blackBerry Smartphones, redirector works does not, the grayed out E-mail settings

  It worked. I had everything set up, and then I can only assume the last weekend when I installed and updated in MS it canceled everything.

  Now when I open the Desktop Manager, my email settings are dimmed, I can't synchronize my messages or calendar. When I click on it, it is said, "the e-mail settings are not available without an online connection to your e-mail system." When I go to sync and try to set it up, there is no Outlook profile to the choice. I've added another user profile in outlook and tried again, but there is still no profile, choose in the menu dropdown.

  Also, when I open the redirector, I get the message. ' Bot can the redirector: connecting to your e-mail system could not be initialized.

  I know that they are both related, there's something I forget. I have gone through the forums and tried several things that seem to be the same, but none have worked. Does anyone have a suggestion?

  I don't know it's important, but I have a "BOLD" and using Outlook 2007.

  OK, I got this problem. The redirector works now, besides I'm able to synchronize my device with Outlook. What I did uninstall Outlook and then reinstall it. Which corrects the problem. Questions in a trouble... wish that I would have thought of this earlier. Thanks to all who tried to help.

  Chris

• AnyConnect VPN connects to the work but not the House

  Hello

  I tried searching for this problem, but I have not found something that I think applies to this situation.

  A University that I work uses a vpn ssl with Anyconnect and while in my office at another University, I can easily connect (even through a firewall). However, at home I can not connect.  If I connect to the webvpn then the connection hangs at the part where the installation program is to analyze the computer and nothing happens.  If I open the program Anyconnect sslvpn address in the login field and I get a time-out error.

  I tried to disable the windows firewall and my antivirus, but this is not enough, and not that he should, since both are active while at my desk. I also tried connecting via ethernet and wireless at home.

  OS: Windows 7 64-bit

  Thank you very much for your help!

  We started to see a similar problem a few weeks ago and concluded that when not at the office, users must uncheck the proxy configuration in Internet Explorer before AnyConnect works.  Once they VPN, they must of course activate the setting back on proxy.

  So far we can say, IE started to cache the proxy.pac and use it when the user is not connected to the corporate network.  We are still investigating but would be interested in hearing if this affects others now, and if this is a recent problem for them.

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka

• Windows 7, PS cc 2015.  Open the image, double layer... go to image > adjustment > work of contrast or hue/saturation...none, as no response to both ends of the zipper.  Plugins work, but not the adjustment no matter where I'm going to click it... c

  Can't get hue/saturation or brightness/contrast to work... .levels, vibrance works...   Windows 7 and PS CC 2015.  Worked fine in previous versions of PS.  Any ideas?

  I have a screenshot for hue/saturation and preview option at the bottom right is not checked in this Panel.

  You should check this option in order to have a preview of the result.