Importing video files from my camcorder

Similar Questions

• To import video files from drive C

  When you import video files into Movie maker I get this message: cannot be imported. An interface has too many methods to fire events from. Any ideas?

  It is a message that usually comes when you try to import files that do not work with MM.
  See this page, it is best to work with video files dv.avi/wmv, wav/wma music and bitmap images.
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

• Qosmio G50-12 q: no audio signal while moving the video files from the camcorder

  Hello

  I have a portable PC Toshiba Qosmio G50 - 12 q with 640 GB HARD drive, and equipped with 4 GB of Ram saw the Completed window system upgraded to the version of service pack 2

  I connected the video camera Sony PC 115 to the PC via the I.Link IEEE 1394 cable while that I import a video to Window Movie Maker in order to save it.

  At the moment where it is reproduced in the form of Movie Maker, I see the video reproduced the video camera but don't feel no audio. Then when I'm done for import video I want and he always see in Movie Maker, the program reproduces regularly or video he recorded or the audio exactly I didn't think it was important while it.

  It ' is usually?

  Working group than in the phase of import that I would have to see and feel or the audio video. Task not is defective cable because when I see the video recording in Movie Maker I feel also the audio base, means that the audio has left the video camera, is entered into the PC via the I.Link recorded it.

  To the point, I can hear the audio in the phase of transfer / import video or any other audio device from the camera / video, I have to in case of change inside of Window Movie Maker or the window given some details of formulation considers also the I.Link Jack specifically?

  Or the cable is connected between the video camera and PC with purpose there details? Even if it seems to me have connected well it boom ' as I have said, l "audio is saved."

  Thanks and greetings

  I have Sony camcorder DCR-TRV520E and in the past, I recorded several movies on my laptop.
  I used the Ulead Movie studio application and everything was OK.

  10 minutes ago that I tested it with Windows Movie Maker (Vista) too. Here a few facts:
  -My cam Sony is recognized correctly
  -Started Windows Movie Maker and chose the option IMPORT > digital video camera
  -Traveled in the right folder
  -On the next stage of the single application started rewinding videotape
  -Importing video has begun only and when finished I checked it and the sound was there.

  Later I chose the option "publish on" > this computer and after 20 minutes it was all over.

  I just use the firewire cable. Nothing special.
  I really don't understand what's wrong there.

  East - the first time do you it?

• Transfer video files from my JVC Everio camcorder problems

  I am trying to transfer video files from my JVC Everio camcorder to my computer to play on windows media player - windows XP, but receive an error code: C00D11D1 say there are problems with my sound or images, but there is no update for windows media player?

  It is a generic code and a lot of different solutions.

  To help you, can you confirm that this is the sequence of events:

  * you transfer the video files to your PC
  * then you try to open them in WMP
  * gives the error message celebrates

  You may well have a codec problem, that can be solved in 2 ways:

  * Download and use Gspot (Google for it). Drag the file in question on the small window which is Gspot and it will tell you what are the different audio and video codecs. Serach the web and download the forms.

  * Download and install a Cedec such as K-Lite package.

  See you soon,.
  Jerry

• I'm trying to import video in Movie Maker and get the following message: M2U00017. MPG could not be imported. An interface has too many methods to fire events from. What do this mean and what should I do to allow me to import video files to edit?

  When you try to import video files in Movie Maker I get the message; M2U00017. MPG could not be imported. An interface has too many methods to fire events from

  -What this means and how do I fix it so I can import video files to edit?

  When you try to import video files in Movie Maker I get the message; M2U00017. MPG could not be imported. An interface has too many methods to fire events from

  -What this means and how do I fix it so I can import video files to edit?

  =======================================
  Movie Maker has problems with the .mpg files... best bet would be
  to convert the .mpg files before importing the .wmv format.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, .wmv

  See the following article:

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - digital media experience

• Panasonic NV-DS65A cassette MiniDV camcorder - can I get my personal video clips from my camcorder directly to my computer?

  I was wondering if I can't save my personal video clips from my camcorder right on my computer.  If so, how this is possible.  I checked the manual for my camcorder and it does still photos but I need to save the tape of the camcorder to my computer.

  Hello

  · What is the operating system installed on the computer?

  If the camcorder does not support video recording directly to the computer, then you can use Windows Movie Maker.

  See the link below and check if it helps: importing video from a DV live camera: http://windows.microsoft.com/en-US/windows-vista/Import-live-video-from-a-DV-camera

• my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  It would be useful to know what camcorder from toshiba.
  Memory, are all quite small pocket, recording cameras a card and HD, probably using mpeg4.
  Your cam will have come with a cd with the right codec on it to allow you to play your files on the pc, you will need to reinstall this software.

• YET CS6 - glued pine Wheel Mode when importing video files simple

  STILL, CS6 - glued pine Wheel Mode when importing video files simple. I'm having the exact same issues on my IMAC (end 2013) and my MacBook Pro (late 2009). I'm on day 2 of this. STILL worked very well last week and I was told no upgrade or modules from. Any help would be greatly appreciated.

  NM

  Adobe has NOT made the decision to stop the upgrade again... see #8 here because why http://forums.adobe.com/thread/1337952?tstart=0

  If you want to use again, you must have an operating system supported... and Mac 10.11.4 is not supported

• When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Users/student/movies / '.  I want to be able to drag and drop the files, by clicking on the SD icon on the desktop and drop it in

  When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Useres/student/movies / '.  I want to be able to slide the SD card on my desktop icon in the quick editing workspace and select the files I need to change.  Thank you!

  You are on a network in a school? If there might be one video files with the same name already exists in this folder.

  Try to get the video files using add media videos from camcorders or cameras and by accessing the camera or the card reader by using the video importer. In the video importer, you can set the custom file name and rename your files so that they will not have the same names as existing files.

• How to send large video files from my iPad

  How to send large video files from my iPad

  The restriction for large files to mailing in general is defined by your email provider. Most of the suppliers imposed restrictions on the size of attachments. You can contact your e-mail for more information provider, but in general, consider a large video file too large to email.

• Toshiba 40SL733g - how do I play video files from USB flash memory

  When I plug my USB key into the USB port, menu Media Player comes with two options: Photos and settings.

  How can I make my TV recognize and play video files from USB flash memory?
  Flash is on FAT32.

  I tried to play avi, mp4 and mkv files, but nothing happens. It seems that flash is empty.

  Could you please help me solve this problem.
  Thank you!

  bzunic, have you updated the firmware your model?

  With my own game, (32RL900A), the notice said that some of the buttons of the remote control are "unused", however, after the first update of the firmware, the "unused" buttons have been used, (in our case, record, Time Shift and so on).

  Is the reason why I talk about this, these features became available after an update of the firmware and not included in the manual of the user, in our case, and a subsequent download of the instruction manual for our model actually gave instructions for the use of these features, which have been presented as 'not available '. in the manual original instructions supplied with the TV, but became available after the update of the firmware.

  Let us know how it works...

  donhe7

• How to play the video file from Gigashot A40FE?

  I have 40 GB A40FE cam gigashot.

  I can't able to play the video file from this cam. no support for the folder.

  Please give me answer.
  How to play that format or I want to convert or download any player for whom?

  Hello

  Have you tried to read this file using the VLC Player?

  It is a small player and the best is that it is just for free! :)
  He plays most file types, and I think that you should test.

  See you soon

• The Vixia HF G30 allows a direct copy of video files from an SD card on an external USB hard disk

  I am considering buying a G30 and need to know if she will allow a direct copy of video files from an SD card on an external USB hard drive.  The manual is not clear on this point.

  Not to my knowledge (I own a G30 HF).  There is no present on-the-go USB functionality.

  Personally, I do not miss such a feature, because it causes all kinds of compatibility problems, especially with regard to the power of external USB hard drives. In addition, without any file manager, backup of your video files into a nightmare. I must admit that I am rather Cannon after not on an often incomplete function development budget and have it spent instead on the main features of the camera, such as optics. Of course, this is just my very subjective opinion, and other HF G30 clients may have different opinions on this.

  In order to back up my video files on the fly and without having to carry a laptop, I recently bought a made by Hanso Hyperdrive colorspace UDMA2 and installed a 1 TB in her drive. When on the ground and after having taken my shots I just pop in my inside SD cards and the device of copies on the video files to 17Mbyte per second. At home, I plug in the UDMA2 in my Linux video workstation using a regular USB cable and pull the video from the mobile disk. The UDMA2 also did incremental backups and comes with a basic file manager. While it has a color screen, it can't play back video. It is a video and photo backup dedicated device, nothing more. But it does a decent job on exactly that.

• Hello! I can't embed a video file from a URL, an intelligentsia InDesign on-site?

  Hello! I am trying to embed a video file from a URL in my document. I can download the video, then join her and she plays very well, but I'm doing a pdf file that will be distributed by e-mail, so there is no place for an attachment 111 MB! It must be the URL. However, when I try to make a link to the URL rather than the local file, I have the warning "Must reference a file compatible with Flash Player".

  The video file is in mp4 format, so this should be OK? Here is a link to the file in question (and ideally the address I would like to make a link to as well): http://players.brightcove.net/1349401008001/default_default/index.html?videoId=13605447050 01

  If the host is the problem, what could anyone recommend a compatible InDesign video hosting site? YouTube doesn't seem to work.

  Any help is appreciated! Especially since this thing is due tomorrow and it's almost 22:00 here. Argh.

  Tom

  You can try a dropbox folder, but my advice is to stop putting videos into PDF files. That's all just a bad format for this.

  http://boblevine.us/its-okay-to-say-no-to-interactive-PDF/

• I want to make my program can import video files to the body.

  As I said before.

  I try to import a file from another program, something he can already support if I import it manually.

  My final goal is when I press a button1 to another program, then the body matter the 'c:\1.mp4' file to the currently open project.

                 Also when I press a button2 to another program, and then body matter "c:\2.mp4" project already open file.

  So, I tried to make jsx file and to build the Panel.

  To use the file jsx to After Effect, I typed "afterfx - r c:\1.jsx" on the command line.

  But I can't find any entry to the body.

  What should I comand when I push the button1 ?

  Hello

  ExtendScript ranging from the command line is not the best workflow; build a sign first and fire your ExtendScript from there.

  Here is the example of Panel:

  https://github.com/Adobe-CEP/samples/tree/master/PProPanel

  This is the "getting started": doc

  https://github.com/Adobe-CEP/samples/BLOB/master/PProPanel/payloads/PPro_Panel_QuickStart _ Guide.pdf

  You will see the sign use importFiles().