Impossible start oracle database

Similar Questions

• He cannot start Oracle Database after server restart.

  construction of an oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0

  and 11 GR 2 as database of New York City.

  Once I completed the installation and configuration, I install the client EAS essbase, once completed I have too reboot the server

  Once the server is back, the database gives me the following error:

  Database Instance: Hyperion

  Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 2:19:45 CEST

  Database instance

  Host localhost

  Port 1521

  Hyperion SID

  C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home

  Earphone

  Down status

  Host localhost

  Port 1521

  Name LISTENER

  C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home

  Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin

  TNS-12541 details: Listener TNS:no

  Connection to the Instance of the agent

  State has failed

  ORA-12541 details: TNS:no listener (DBD ERROR: OCIServerAttach)

  Change the details of the State

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > SQL > ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_HYPERION."

  Disconnected

  Database Instance: Hyperion

  Error message

  The startup of the database operation failed. Click on "View details" to see the error. You may need to perform a restore.

  See the details

  Perform a recovery

  Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 12:56:37 CEST

  Please notify

  %ORACLE_HOME%=C:\app\Administrator\product\11.2.0\dbhome_1 this looks OK

  but I did a search for TNSlistener. ORA file and it wasn't there?

  I missed an aseo when configuring the database

  Please notify

• automatically start oracle...?

  Hi all,

  I installed oracle 11 GR 2 successfully in redhat 6.4 on my pc. After that, I want to

  do auto-start when pc starts. I used the follwing script: -.

  #! / bin/bash

  #

  # oracledb - little shell script for autostart your databases oracle and Auditor

  #

  # chkconfig: 2345 90 90

  # Source function library.

  . /etc/init.d/functions

  # Source network configuration.

  . sysconfig

  PROG = oracledb

  LOCKFILE = / var/lock/subsys / $prog

  ORACLE_HOME=/opt/Oracle/app/Oracle/product/11.2.0/dbhome_1

  ORACLE_USER = oracle

  Start() {}

  ["$NETWORKING" = "no"] & & exit 1

  If [f $LOCKFILE]; then

  echo $0 already running.

  Output 1

  FI

  echo - n $"Starting oracle database."

  known - $ORACLE_USER - c "start ORACLE_HOME/bin/lsnrctl $".

  Su - $ORACLE_USER-c "$ORACLE_HOME/bin/dbstart $ORACLE_HOME.

  known - $ORACLE_USER - c "$ORACLE_HOME/bin/emctl start dbconsole.

  RETVAL = $?

  ECHO

  [$RETVAL - eq 0] & & touch $LOCKFILE

  return $RETVAL

  }

  Stop() {}

  If [! f $LOCKFILE]; then

  echo $0 already stopped

  Output 1

  FI

  echo - n $"Stoping oracle database."

  known - $ORACLE_USER - c "judgment of $ORACLE_HOME/bin/lsnrctl.

  Su - $ORACLE_USER-c "$ORACLE_HOME/bin/dbshut $ORACLE_HOME.

  known - $ORACLE_USER - c "$ORACLE_HOME/bin/emctl stop dbconsole.

  RETVAL = $?

  ECHO

  [$RETVAL - eq 0] & & rm-f $LOCKFILE

  return $RETVAL

  }

  case '$1' in

  'Start')

  beginning

  ;;

  'stop')

  stop

  ;;

  "restart")

  stop

  beginning

  ;;

  'status')

  If [f $LOCKFILE]; then

  echo $0 began.

  on the other

  echo $0 stopped.

  FI

  ;;

  *)

  echo "use: $0 [start |]» stop | status].

  Output 1

  ESAC

  Exit 0

  I did like this: -.

  # cp /etc/rc.d/init.d/oracledb oracledb

  # chkconfig - add oracledb

  # chkconfig oracledb on

  everything is ok except

  After restarting pc

  https://localhost:1158 / em

  404 not found

  to do this: -.

  $sqlplus / as sysdba

  SQL > startup;

  then

  " https://localhost:1158 / em "works very well "

  question of making the autostart oracle database and I wouldn't need to explicitly

  start as sysdba

  ------------------------

  If I manually give the orders

  $lsnrctl start

  successful

  $dbstart $ORACLE_HOME

  and

  $dbshut $ORACLE_HOME

  immediately after the gift of command, it shows no output. How will I know whether it is successful or not.

  and finally

  $emctl start dbconsole

  works very well (no error)

  what I would do.

  Thanks in advance.

  A manual start with dbstart work? Have you checked your file/etc/oratab to see if entries for ORACLE_SID: ORACLE_HOME: Y?

  If you do not have oratab, just run root.sh as user root

  replace chkconfig with---> chkconfig: 35 99 10

  chmod 755 /etc/init.d/dbora

  Register the Service with

  / sbin/chkconfig--add released

  Kind regards

  Suntrupth

• Oracle database won't start - Interview Question? How to answer Interview in short-

  Hello people

  I am Java programmer, trying to gear to Oracle DB, attended a few Interview.

  So far in the Interview they ask this question "How do troubleshoot you if Oracle database is not running / does not start?

  Since I have no experience in real time.

  I would say that I'll go and do a TNSPING, check the Listerner.ora entries. If Windows I will tell me that I'll check Services.

  but so far, it seems that they are not happy with my answer.

  So I ask each of you to tell me how I should answer.

  I know it's the open question but how should I tell them in a nuttshell.

  Thank you

  Matt

  I am Java programmer, trying to gear to Oracle DB, attended a few Interview.

  So far in the Interview they ask this question "How do troubleshoot you if Oracle database is not running / does not start?

  Since I have no experience in real time.

  I would say that I'll go and do a TNSPING, check the Listerner.ora entries. If Windows I will tell me that I'll check Services.

  but so far, it seems that they are not happy with my answer.

  So I ask each of you to tell me how I should answer.

  I know it's the open question but how should I tell them in a nuttshell.

  Well - until now I disagree with ALL of the other answers!

  IMHO the FIRST STEP in ANY troubleshooting task is to CONFIRM that the problem really exists.

  The KEY part of this confirmation is to get ALL the information available to the person reporting the issue. In an interview which is SIMPLE - the person reporting the issue is sitting right in front of you. So instead of running around like a chicken with its head cut off you should begin by asking a few key questions:

  1. you said that the data is not running

  a. IS IT supposed TO BE running - that would be my VERY FIRST question!

  b. How do you know this? A user did report it to you? Have you tried to use yourself?

  c. How do confirm you the DB was down? Have what measures you taken?

  d. What do you mean by DOWN? Stone cold dead? Running but not accessible to business users? Running but inaccessible to anyone including DBA?

  e. what other information you have about the problem? Have you checked the log of alerts? When was the last time it was running normally? What could have happened since then to bring it down? There were backups or scheduled maintenance tasks?

  2. you said that it does not start

  a. How do you know this?

  b. did you try to start it yourself?

  c. how the restart was attempted? how much? where (what machine)?

  d. what command they use? They use 'EM? Or a console?

  (e) what has been the result? What has been the response on the console (if the console has been used) what has been the result if EM has been used?

  Your answer to that seemingly simple question should have been to about a dozen questions of your own like I did just above. There is NOTHING to do, IMHO, before getting THE news AND ALL of the one who reports the problem - that includes interviewers.

  Disappoint my more great in interviews is when otherwise intelligent people are so reluctant to ask questions to get the information they need to understand and confirm the question/problem.

  The above is why I "disagreed" with the other responses made so far. Certainly, the alerts log is important and must be checked. But it's a lot easier knowing what the person concerned (interviewer) know asking them just before starting to run. As far as we know that the interviewer was ready to tell you what the alert log say if you just ask.

  My rule #1 in an interview: ASK QUESTIONS!

  Anyone who is not asking questions in my interviews gets demerits. I can train someone how to solve problems and perform DBA tasks. But I found it almost IMPOSSIBLE to tell when they don't know something if they don't ask questions or tell me "I don't know".

  If someone just asking these questions above this would indicate to me that they know how to FIND the information they need, even if they don't know yet how to use this information.

• Is it normal to have more than 2 starts in the production oracle database?

  Dear Experts,

  East - the best prractice to have only 2 starts for the production oracle database

  for example

  + data

  + FRA

  Thanks in advance,

  IVW

  IVW wrote:

  Thanks Aman

  Segregation starts may travel on these factors

  • 1. the speed of the disks (redologs online had to be faster disk)
  • 2. the redo of multiplexing files
  • 3. the multiplex control files
  • 4. after archivelogs on another disk
  • 5. other than the DATA + and + FRA

  Yes, but 2-4 points can be met with groups of two discs as well - + data the primary file hosting and + FRA accommodation multiplexes copies.

  Aman...

• How to start the oracle database server and its client in windows 8

  Hi all

  I am a new entry in this forum and I am a beginner with oracle database.

  I always used SQL Server as the database, and it was easy to use after installation.

  With management program configuration of SQL Server I could to start service SQL Server (SQLEXPRESS) and the database server start!

  With SQL Server management studio, I was able to launch the client application, then was to establish a connection to the server and everything worked great!

  Now, how to work with the oracle database?

  I installed the oracle server and client version 11g R2 in windows 8, but how do I start the database?... and how can I start the client application to query?

  best wishes in advance.

  PS: Sorry for my English.

  If you are on the same machine, the only service that you absolutely need to start is the database service.  In your case OracleServiceSYSDBA (hmmm... How did you find with this name?).

  For queries, you can use SQL * Plus which should also be installed.  If you want something GUI, you can use SQL Developer (you need to install separately I think).

• AGAIN starts after only one physical disk has several partitions makes no sense to the production oracle database?

  Dear Experts,

  Don't + REDO1 diskgroup have only one physical disk has several partitions makes no sense to the production oracle database?

  For example

  • + Diskgroup Redo1 have 2 50 GB disks (fact these 2 discs are the same physical disk partitions OR these should be separate disk as recommended approach)?
  • + Diskgroup Redo1 have 2 drives of capacity 50 GB (for RAID 1 + 0)
  • + Diskgroup Redo2 have 2 50 GB disks
  • + Diskgroup Redo2 have 2 drives of capacity 50 GB (for RAID 1 + 0 )

  Thank you and best regards,

  IVW

  Hello

  Partitioning your disks for ASM configuration as 'A' might make sense. If you lose one disk, you have the discs to another.

  'B' totally make sense if you have lost the disc that you have lost all group ASM and you need to change this with something like 'C '.

  But obviously you need redundancy ASM configured appropriately.

  

  Kind regards

  Juan M

• Impossible to install oracle database 11g r2 under linux guest system

  Hi all
  
  I have a fedora 18 comments system installed in windows home 7 using virtualbox. I am installing the oracle 11.2.0.2 database in my comment fedoral system. The oracle database is on a shared folder. I tried these two commands to install the database:
  
  [root@localhost database] # chmod + x./install/.oui
  [root@localhost database] #. / runInstaller
  . / runInstaller: line 254: /media/sf_MyShare/Oracle/database/install/.oui: cannot execute binary file
  However, he failed miserably. I don't have any experience in the installation of oracle on linux database. Can anyboday give me a clue to help me solve this problem? Thank you very much in advance.
  
  Hong

  As I said

  For the error cannot execute binary file, check if you have downloaded the right version of the database for your architecture.

  ZLinux is port of LInux to the IBM servers, it is a bad download corresponding to your installation. ;)

• How start sqlplus on windows7 host running the Linux oracle database?

  OK, thanks to Re: How do I install emacs, openssh, and oracle database startup and get a connect? I can now run sqlplus. What a fight!
  
  Now this forum works on a host linux on a windows host. What I need to install on windows, so I can run sqlplus on windows to manipulate databases of the linux guest?
  
  I know that I can install all of the oracle database. I want just the sqlplus on windows.
  
  If I install just the sqlplus on windows, can I expect to be able to create databases, fill and interrogate Windows?
  
  Thank you
  Siegfried

  Try:

  sqlplus user@'hostname_or_ip:port/service_name'

  for example sqlplus test@'192.168.1.131/orcl' (assuming that the default port 1521).

• How to start an Oracle database

  Hello everyone,
  
  I'm running windows server 2003 standard edition OS on my computer in the C drive in the c:\Windows folder.
  
  I installed Oracle 10g 10.1.0 product on my computer in the E:\Oracle10g drive.
  My Oracle database was stored in E:\ORADATA. His name is orcl database by default. My OS was accident due to a virus attack.
  
  I installed Windows Server 2003 Standard Edition on the C drive in the c:\WIN2K3 folder. I have not format drive C at all.
  
  I installed Oracle 10 g Release 10.1.0 in drive C C:\ORACLE folder. New name of the database is SMS which is stored in C:\oracle\product\10.1.0\oradata.
  
  How can I import my data from ORCL database that is stored in E:\ORADATA\ORCL DRIVE? Is it possible? Please help me.
  
  
  with respect,
  RLS ROULIN
  [email protected]

  [email protected] wrote:
  Hello everyone,
  How can I import my data from ORCL database that is stored in E:\ORADATA\ORCL DRIVE? Is it possible? Please help me.

  Export of database ORCL with the [export datapump | http://download.oracle.com/docs/cd/B14117_01/server.101/b10825/dp_export.htm#g1022624], then import the export dump file in the database on drive C with the [import datapump | http://download.oracle.com/docs/cd/B14117_01/server.101/b10825/dp_import.htm#g1025464]

• Configure Enterprise Manager in Oracle Database 11g

  Dear all,

  I want to configure my Enterprise Manager Console for Oracle Database 11g. During installation I unchecked "configure EM Console."

  I have Oracle Red Hat Linux 6.5, please guide me how can I start my console em on the Linux environment.

  Kind regards

  Atif Zafar

  Hello

  If you want to create or configure Enterprise Manager console, follow these steps:

  • Set ORACLE_HOME environment variable
  • Set ORACLE_SID
  • ORACLE_HOSTNAME environment variable set. Use the same value returned by the command "hostname".
  • Run the emca (Enterprise Manager Configuration Assistant).

  $ emca - create config dbcontrol db-rest

  • Follow the instructions.

  Kind regards.

• 10.2.0.5 Oracle database link (Linux - x 86) for MS SQL Server 2012 (x 64)

  Please guys, I really need your help on this issue.

  I tried using freetds driver but when I use db link I get this error:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Generic connectivity using ODBC] [S1000] [9013] error General nvITrans_BeginT - rc = - 1. Please see the log file for more details.

  ORA-02063: preceding 2 lines MIXERI

  To cite that I can connect to the remote sql server through isql tool with no problem at all. I study a lot and I found no solution for this error, so to this end, I will try to find another alternative way.

  
  

  Is there another way to manage the communication link between the system of 2 DB db?

  Thank you

  Hello

  S erro coming from the ODBC side then you can try the following-

  1. change the listener.ora LD_LIBRARY_PATH for-

  (ENVS=LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/db/oracle/10.2.0/lib)

  stop and start the listener.

  2. don't you get the error even if you delete the entry-

  HS_FDS_SQLLEN_INTERPRETATION = 32

  3. get a debugging bridge route-

  -Comment the entry
  HS_FDS_TRACE_FILE_NAME = /db/oracle/10.2.0/hs/admin/MIKSERI.trc

  then the tracks go to the location by default with default names-

  /DB/Oracle/10.2.0/HS/log

  -set the level of the trace-

  HS_FDS_TRACE_LEVEL = DEBUG

  -start a new session of SQLPLUS, run select, close the session.

  -Download the trace from somewhere, it can be displayed by our care.

  It can also be an idea to install and use the 11.2.0.5 last DG4ODBC gateway that is certified with RDBMS 10.2.0.5 and available at My Oracle Support you.

  Patch 13390677: 11.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER

  which must be installed in a new and separate ORACLE_HOME.

  Kind regards

  Mike

• Unable to start oracle

  Dear all,

  I installed oracle 12 c on my linux machine and today I shot two or three cold backups back to back and later, when I try to connect, I'm not able to start/stop database.

  Help, please.

  [oracle@Rac1 oraInventory] $ sqlplus "/ as sysdba".

  SQL * more: Production of the version 12.1.0.1.0 on Mon Jan 11 15:01:15 2016

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connected.

  SQL >

  SQL > startup

  ORA-01012: not connected

  Process ID: 0

  Session IDs: serial number 0: 0

  SQL > the judgment

  ORA-01031: insufficient privileges

  SQL > shutdown immediate;

  ORA-24324: service handle not initialized

  ORA-24323: value not allowed

  ORA-01089: immediate shutdown or closing in progress - no operations are allowed

  I see several potential problems.  Sent alert messages could come from the second closed database backup being launched before the first completed.  Your display startup do not appear if you connected in fact first.

  - -

  First check the OS to see if you have closed the backups are still running?  If so, you probably want to kill.  Then try to connect as sysdba using the following:

  - -

  sqlplus/nolog

  Connect / as sysdba

  aside the judgment.

  - -

  If the foregoing connects and issues the demolition, out, then use the same model and deliver start rather than give up.

  - -'

  Let us know how it goes.

  - -

  HTH - Mark D Powell.

• Oracle Database 10g error

  Please after that I have work in (Oracle Database 10g Express Edition)

  for three months, I have install and work in this (Oracle Database 10g Express Edition) without any proplem now does not

  When I run an exporter of the internet does not work

  can someone help me thanks

  Open the command window & question OS command sequence

  lsnrctl start

  lsnrctl status

  # Wait 60 seconds

  lsnrctl service

  COPY the results from above then PASTE all back here

• Problem of temporary file in the database takes a while to start the database

  Legends of dear,

  I am facing the warning next or problem with R12.0.6 64 bit and 10.2.0.3 databases in a linux environment

  Mar 20 18:24:23 Oct 2015

  *********************************************************************

  ATTENTION: The following temporary tablespaces do not contain any file.

  This condition can occur when a backup controlfile

  been restored.  It may be necessary to add files to these

  storage spaces.  This can be done using the SQL statement:

  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE

  Furthermore, if these temporary tablespaces are no longer

  necessary, then they can be recessed.

  Temporary tablespace is empty: TEMP3

  *********************************************************************

  When I questioned my database_properties

  Select * from database_properties where name like '% TEMP % ";

  

  Journal Alerts

  Mar 20 18:24:23 Oct 2015

  Completed: ALTER DATABASE OPEN

  Mar 20 18:24:25 Oct 2015

  Additional checkpoint up to RBA to RBA [0x68e.5c2b5.0] [0x68e.5c26c.0], current journal line

  Details of the Temp file

  /Oracle/prod/DB/apps_st/data/temp03.dbf	1	TMP4
  /Oracle/prod/DB/apps_st/data/temp04.dbf	2	TMP4

  Because of the warning above when I give 'start-up' in "sqlplus" or start the database using the addbctl.sh script there is a huge gap between the following

  SQL > startup;

  ORACLE instance started.

  Total System Global Area 2147483648 bytes

  Bytes of size 2074112 fixed

  872417792 variable size bytes

  1258291200 of database buffers bytes

  Redo buffers 14700544 bytes

  Mounted database.

  ..............

  ................

  ..............

  .............

  ...........

  .......... (LOCAL TIME - 10 to 15 minutes)

  ...............

  ...............

  .................

  ........

  Open database.

  Please suggest how to deal with this.

  Thank you

  Knockaert

  Hello

  It is a question of pure database. Not much relationship to the EBS.

  Anyway, as stated in the warning, you must add a temporary file in the tablespace TEMP3 or drop the tablespace if you do not need.

  Can you post the full alerts log part, which takes 10 to 15 minutes?

  Kind regards

  Bashar