Impossible to burn CDs in the virtual from Windows 7 computer

Similar Questions

• How to enable the communication between the host and the virtual from Windows 7 computer

  Host: Mac OS X 10.6

  Setting of networking: NAT (also connected to the VPN work)

  VM: Windows 7

  I use my mac for my development. I have an application running with the Web Server server. I also use the hosts so that I can map the URLS of different web site with the same ip address.

  For example:

  On my Mac in/etc/hosts

  127.0.0.1 www.testsite1.com www.testsite2.com

  On my virtual from Windows machine in the hosts file

  987.78.125.125 www.testsite1.com www.testsite2.com

  When I'm at the office and using bridged connections, it works very well. However, I prefer to use NAT all the time.

  Is this possible?

  
  Thank you!

  I actually already answer your question but now I know the details, and by the way you have explained so much better the second time!

  When not connected to the VPN on the host computer and the guest knows the IP address of the Web server on the host (an appropriate entry in the guest hosts) then it should work but when connected to the VPN, if you are administrator does its job well, that you should not be able to connect the host to the guest for the reason mentioned previously...  Authenticated/no unapproved system (guest) cannot access an authenticated / trust system (host), while the VPN on the host computer is set up to your corporate network.

• Unable to access the files from Windows 7 computer to Windows 8

  Hello

  I have Word 2007 on two computers, and each has Windows 7 or 8.  I'm trying to share with homegroup.  My goal is to keep my documents on Windows 7 system and access the files (read and edit) the system of Windows 8. I don't want multiple documents, I want just one version.

  After you open the docx Word read-only, I did some research and discovered that if I go to the file on the computer with Win7, made a right click on the file, then select residential group read/write, I would then be able to access the computer of Win8 file and edit and save it.  I was able to do this.

  OT: Word 2007 ReadOnly

  To make sure that I could continue to do so, I tried again (by selecting the docx on the Win7 system since the system of Win8).  I received one copy read the second time.  What should I do to edit and save the Win8 computer capabilities, without having to physically run to the Win7 to allow access?

  Thank you

  Hello

  Thanks for posting your question in the Microsoft Community.

  The description above, you want to computer Windows 7 to Windows 8. I'll be happy to help you on this question.

  This problem may occur if the file share on the computer are not correctly enabled. I suggest you try the steps from the following links:

  Share files and folders on a network or shared PC
  http://Windows.Microsoft.com/en-in/Windows-8/share-files-folders

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Share files via public folders
  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• After an attack of virus on the server, I am unable to connect to the server from any client computer.

  After an attack of virus on the server, I am unable to connect to the server from any client computer.

  Applies to: Windows | Windows XP | Networking, Mail, and getting online

  I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.

  PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  Hello

  Because the problem is with the server, I recommend you post this question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Replace the MBR from Windows XP Pro

  How to replace or repair the MBR from Windows XP Pro?

  An ASR replaces the MBR?

  Out of curiosity, I tried sysint.no mbrfix.exe using examples.  I know ran fixmbr mbrfix application.  How to bring back the original Windows XP Pro MBR?

  In addition, the flush for the app to c: drive was performed.  Made BRIM?  Thank you

  Hello

  See the following article: Description of the recovery Windows XP for power users Console

• Cannot send the email from windows live - windows 7

  All of a sudden I can't send the email from windows live - windows 7

  And you ask a question of Windows 7 in a Windows XP forum?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• There is a kind of cable I can buy to transfer the information from my main computer to my laptop?

  Original title: laptop

  I have a Dell Inspiron 1501. There is a kind of cable I can buy to transfer the information from my main computer to my laptop?

  Hello

  Of course, you can use a USB drive, CD or DVD to transfer the data.

  Or use an easy transfer cable system.
  http://Windows.Microsoft.com/en-us/Windows7/how-to-get-an-easy-transfer-cable

  -----------------------------------------------------------------------------------------------------------------

  This allows you to network the computers if you wish.

  To connect two computers with a cable, not a router, it must be a crossover cable. These
  are special cables, but they are not expensive.

  Connect two computers using a crossover cable (XP - Windows 7 may be the same)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cable

  It is a description however computer stores will sell them at low cost.
  http://en.Wikipedia.org/wiki/Ethernet_crossover_cable

  Amazon - example of a crossover cable
  http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT

  -------------------------

  Setting up a home network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Configure an ad hoc network:

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  ------------------------

  Or install a regular rnetwork:

  These should help:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  wlmail.fol is a tiny text giving the name of the folder. The exported messages will have filenames like 00D13E83 - 000025DF.eml. If you don't see all of the files like this, your export probably did not work properly.

  For a successful export, follow these directions:

  1. Set Windows Live Mail to work offline before starting.
  2. Create a temporary folder on your desktop * to contain the exported messages.
  3. In the Export Wizard, select the temporary folder, and then select all the folders.* *
  4. When it is complete, check that the number of files in each folder to the temporary folder is one more than the number of messages in the corresponding folder of WLMail.
  5. Copy the temporary file to its final destination.
     If you use a reader not NTFS to do this, you will see a warning that certain file properties will not be copied files. This can be ignored.

  * Windows Live Mail do not work with files that are not on a local drive, as opposed to an external or network drive. This is avoided by using the office as a temporary folder location. 
  * If you want to export the files sampled only, select each of them containing messages. Subfolders are not automatically selected by default.

• How can I change the software from windows to mac?

  I use a MAC, but already bought my design from adobe creative suite standard for a windows computer. Is it possible that I can change the licenses from windows to MAC, so I can continue to use it without having to pay for another sequel?

  They only allow swaps of platform for the latest version.  CS6 would be the last, but I don't know if they still offer the opportunity to Exchange.  You can apply and see.  Click on the following link:

  Exchange a product Adobe of a different version of the language or platform

• I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... :( I uninstalled the PSE from my old computer software. Can someone help me?

  I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... I uninstalled the PSE from my old computer software. Can someone help me?

  To locate the serial number:

  ----------------------------

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

• How can I crossgrade my CS5 of the license from Windows to Mac OS?

  I want to switch a computer laptop windows to Mac and still use may CS5. How can I crossgrade my CS5 of the license from Windows to Mac OS?

  Best regards, Viktor

  You can not.  Platform swaps are supported only for the most recent published suite which is currently CS6.

• 4251 error trying to burn CDs of the itunes library.

  * - Original title - itunes error 4251

  I can't burn CDs from my itune library. I get error 4251. Help please.

  Hey, Joe M.

  I see that you get the 4251 error while trying to burn CD from itunes library. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what application you use to burn the CD?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5 is the issue limited to burn CDs from itunes library?

  I suggest you to use Windows Media Player and check if that helps.

  Music, photos, & video: http://windows.microsoft.com/en-US/windows/music-photos-video-help#music-photos-video-help=windows-vista&v1h=win8tab1&v2h=win7tab2&v3h=winvistatab1

  You can also report this issue in the apple support forum and check: http://www.apple.com/support/itunes/troubleshooting/

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Impossible to burn CDs with Windows Media Player

  Media Player

  I can burn CDs, it will say that I have the cd durty or I donth have my burner workin but I can burn in media center always shows that I have the full cd when is a new thank you

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Center

  You can burn different types of CDs and DVDs in Windows Media Center. This allows you to decide what type of DVD or CD you want to create, based on the way and you want to use to read the content after it is burned to a disc.

  And read the links there, too.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to burn CDs of data using Windows

  I can't burn a CD of data using Windows, even if I did in the past. I am still able to burn CDs of music via iTunes and the reader has no problem playing discs; However, when I try to view folder to a blank disc or attempt to add files, the computer does not respond. It shows the circle of rotation for a while and then does nothing. I tried updating the driver, but that did nothing.

  Since I am still able to burn a music CD in iTunes, I guess it must be a software problem rather than a problem with the hardware of the player.

  My laptop is a gateway, model MT6919 and I am running Vista Home Premium

  Any help is greatly appreciated

  
  

  Hi new,

  1. you receive an error message?
  2. did you of recent changes on the computer?

  Method 1

  Uninstall any third-party DVD burning software installed on the computer and try to burn CDs.

  Method 2

  It is possible that some third-party programs installed on the computer are in conflict with the burning process.
  I suggest that you try to clean boot and check if it works.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.