Problem on WIN 7 WIFI network, but it works under WIN xp

Similar Questions

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• Laptop suddenly can't find any available (Wifi) network, but the router is not the problem.

  My laptop was working fine, until what I packed it inside my bag I always do and got chased home my MOM to my father's House; which is a few miles. I opened it upward, and he could not find any networks (wifi) available. I know that the problem could not be the router because everyone elses laptop in my work from home and because my laptop usually shows at least 4 or 5 other connections wifi available, and mine shows nothing at all. The problem is not the wifi switch is on. Help, please!

  Hi Dubist,
  You have a reason to think it might be spyware?

  It sounds more like material if it has just stopped working and there is no other issue.

  Here's what I would do to try to understand the issue.

  Type cmd into the search bar and press to enter. On the command line, type ping 127.0.0.1 and close to enter. You should get a response back as a result time. Something like that.
  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  If you do not, close the window Device Manager and type in the search bar and look under network adapters. See if you have a wireless device it and make sure that there is no exclamation beside him points.

  If you have exclamation points or of any error, reinstall the driver. If there is no device listed, it could just be dead and you can watch that need to buy a new external wireless card.

  Tell us what you find and we can go from there. Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problems connecting to unsecured wifi networks of (starbucks, McDonald's, etc.)

  I have a Dell laptop, I tried to connect to unsecured networks. When I pull up available networks immediately by the unsecured network icon, it is an exclamation that she. When I select to connect, it still says that it is connected, but there is no internet connection. I tried to disable the antivirus and firewall mg temporarily, but it makes no difference. I have a private wifi in that this isn't a problem with me. Anyone have solutions. My windows vista 64 bit is completely up to date.

  Many wifi networks out there do not work with the 64-bit versions - they (wifi in these places devices) require special equipment and/or additions and additional software may (if those that they can be improved without buying a completely new camera) and many simply don't bother or have money or consider that the number of people with a problem they need to address.  I suspect this is the case, that you face – I saw happen with many others.  I don't know there is nothing you can do about it except complain (and perhaps someone will listen).  The fact that you can connect at home means that your system works correctly - it's the Wi - Fi connection in those places that can not connect to your 64-bit version.

  Unfortunately, the 64-bit isn't the main stream quite yet and so always these compatibility issues exist (and will probably be for some time to come).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My Smartphone/iPad can connect to the wifi network, but my laptop do not show the network.

  My smartphone and iPad have both work successfully on the wireless network, but my laptop (Dell Inspiron series n and Sony Vaio e series) does not display the network. The router * I use the modem is D-Link DSL-2750U. Computers that run windows 7 Home Basic. What should I do?

  Hello

  As you mentioned that you are able to connect the Smartphone / I Pad to the wireless router, but the laptop that is running Windows 7 does not connect to the router.

  First of all, try to run the network troubleshooter to see if it can help diagnose and solve your problem:

  See the provided article below for more information:

  Why can't connect me to a network?

  I also recommend that you go through the steps given by 'Kevin Hau ' April 24, 2010 in the link provided below.

  Problem connecting Wireless Windows 7 - No. available wireless connections

  See also:

  Wireless and wired network problems

  Hope the helps of information provided. We know the results.

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Strange printing problem - HP 4625 on WiFi network

  Hi all

  I have a strange problem with my all-in-One HP 4625 printer newly acquired.

  Problem: Printer is no longer available for regular printing on a daily basis.

  Description: Every morning, when I try to print a regular document of any application on my laptop, I get an error message: "unable to communicate with the printer.

  

  I am able to print from my account ePrint (e.g. by Nathaniel a mail to the printer).

  I am also able to ping the printer, access SAP and communicate with the printer, the integrated Web server shows the status of the printer as "ready"... but the 'regular' file-> print does not work.

  Network configuration: 802.11 g open wireless router (3com), 2 laptops running W7.

  HP Print and Scan doctor said that everything is okay, but the print test page fails with the error message

  

  Any ideas would be very appreciated

  Thank you

  BAW

  Hello, two things to check.

  Is the 4625 using CAP1FN1240AR firmware.

  Set a static IP address on the 4625 outside the 3com DHCP range.

• MyLaptop connects to my wifi network but other devices like phones do

  the message I see when running connection diagnostics

  my laptop connects to the network local but not internet

  Gateway IP ping test failed

  The router/AP wireless for your network is not available, no work, or is disconnected. You will not be able to connect to the Internet, although you might be able to connect to your local network. Contact your network administrator or the installer of the router/wireless access point.

  The gateway IP ping test determines whether the router/AP for the network wireless is available and functional.

  Info

  Dell inspiron 1440 32 bit ms-vista reference

  Dell wireless 1397 wlan mini card

  I discovered that the problem was with the firewall in the modem, and now its works well.

  Thanks for the help!

• I can connect to wifi networks but cannot access the internet

  As the title says, I have no problem connecting to all types of wireless (password protected or not), but once I plugged in, there is always a message saying that I have limited access, and I will not be able to access internet since. It is not a problem specific to any router, it's just my laptop wireless. Direct connections (with an ethernet cable) work quite well. When I tried to solve the problems through windows I got the message error "wireless network connection is not a valid IP configuration.
  I have honestly tried most of the solutions out there but stuck on what I can do next

  Hello

  Thanks for posting in the Microsoft community. I understand that you are able to connect to a wireless network, however you are unable to access the Internet when it is connected to the wireless network.

  It would help if you could let us know about any changes made to the computer before the show.

  I suggest that you try the following steps and check.

  Method 1:

  Check out the link and follow the steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Visit the link and try the troubleshooting provided steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if these methods on the other will respond and we can provide several methods.

   

• I want to connect to multiple wifi networks, but with a unique wireless adapter?

  After much research on the internet I found a Virtual Wifi software that makes virtual adapters wireless with a single physical card. I download and installed this software but I don't know how to use it. There is no desktop icon or anything to change in my laptop.

  Can you please tell me some solution.

  I suggest you contact the software manufacturer for instructions on how to put up with your system.

  It should not be necessary buy additional routers.

  Eddieb

• Problem of SQLite in os 5 but that works well on os 6

  Hi all!

  I have a problem with my code while running under Curve 8520 with os 5.0.0.1036 (last available for 8520). I use a sqlite database, and all my code works fine in os 6 in a torch 9800.

  But the 8520, I get an exception sying that I try to write in a database read only.

  Here is my code to initialize the database:

  private DbManager() throws Exception
      {
          // Determine if an SDCard is present
          boolean sdCardPresent = false;
          String root = null;
          Enumeration e = FileSystemRegistry.listRoots();
          while (e.hasMoreElements())
          {
              root = (String)e.nextElement();
              if(root.equalsIgnoreCase("sdcard/"))
              {
                  sdCardPresent = true;
              }
          }
          if(!sdCardPresent)
          {
              this.db = null;
              UiApplication.getUiApplication().invokeLater(new Runnable()
              {
                  public void run()
                  {
                      // TODO : translate
                      Dialog.alert("The application requires a SDCard to store the history. Without card, your history will not be stored.");
                  }
              });
          }
          else
          {
              dbLocation = "/SDCard/databases/"+BUNDLE_NAME+"/";
  
              // Create URI
              URI uri = URI.create(dbLocation + DB_NAME);     
  
              // Open or create a plain text database.  This will create the
              // directory and file defined by the URI (if they do not already exist).
              db = DatabaseFactory.openOrCreate(uri);  
  
              // Close the database in case it is blank and we need to write to the file
              db.close();
  
              // Open a connection to the database file
              FileConnection fileConnection = (FileConnection)Connector.open("file://" + dbLocation + DB_NAME);    
  
              // If the file is blank, copy the pre-defined database from this
              // module to the SDCard.
              if(fileConnection.exists() && fileConnection.fileSize() == 0)
              {
                  readAndWriteDatabaseFile(fileConnection);
              }         
  
              // Open the database
              db = DatabaseFactory.open(uri);
          }
      }
  

  And here is the statement that works with os 6, but not with the os 5:

  public Integer create(Table table)
      {
          long id = -1;
          try
          {
              Statement statement = this.db.createStatement("INSERT INTO ZTABLE(" + Table.TABLE_PK +
                      "," + Table.TABLE_LONGITUDE +
                      "," + Table.TABLE_DATE +
                      "," + Table.TABLE_LATITUDE) VALUES (null,?1,?2,?3)");
              statement.prepare();
              statement.bind(1, table.getLongitude().floatValue());
              statement.bind(2, table.getDate().getTime());
                          statement.bind(3, table.getLatitude().floatValue());
              statement.execute();
              statement.close();
  
              // Retrieve the auto-generated ID of the item just added
              id = this.db.lastInsertedRowID();
          }
          catch(DatabaseException dbe)
          {
              CommonTools.errorDialog(dbe.toString());
          }
          return new Integer((int) id);
      }
  

  Is there a question about the 5 operating system and functionality of sqlite? Or y at - it something wrong in my code that avoids a correct behavior?

  Thank you very much in advance for your answers.

  I use SQLite Database Browser on OSX:

  http://sourceforge.NET/projects/sqlitebrowser/

  never had any problems using db BB OS5 or OS 6

• How can I include my Apple TV in a homegroup. It does not appear on the network, but it works?

  I am using Windows 7 on my XP8000.  I installed Apple TV several months ago.  I wired it to my router.  Everything seems to work fine except when I display the network, Apple TV does not appear.  When I try to SECECT work of the Apple TV, nothing coming except the XP8000.  I can't do anything else.  I thought maybe I should do the part of the Apple TV from the residential group, but can't seem to do it.  Any help would be appreciated of course.  Thank you.  I have AppleCare for Apple TV, but have not used.

  You would not 'see' the Apple TV in the window of Windows 7 network. The Apple TV
  using proprietary protocols. With regard to the content of the navigation using the Apple TV to go
  the computer http://www.apple.com/support/appletv/getstarted/ should help. If
  you have questions, you should post in the apple forums.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Problem of app store... but itunes works perfectly?

  When you try to download anything this either on the App store I'm first getting an unknown error message when you try to connect and download the app or updated, then when I try again once it says unknow error 4. I have a macbook pro, running OS X Yosemite 10.10.5... my account worked very well for my iphone to download.

  Help, please... One weird thing is that on my computer when I go to connect the incorrect email address in the field Apple ID.

  I can connect and watch previous buys and connect to the app store on Mac but you can not download... Error 4?

• Samsung wireless surround does not work with Airport wifi network

  I have a smart tv with a Soundbar and wireless - all Samsung two speakers. I should be able to set up surround sound via the network wireless like this http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 629802 & modelname = WAM7500 & modelcode = WAM7500/ZA

  It works fine when it connects to the router provided by my ISP sky. But when I try to do the same when connecting to the network created by the airport, it won't work no-more precisely, I'm unable to select "link Multiroom' (step 19 in the link above).

  Note: There is no problem connecting to the wifi network - it's this last step which is the issue.

  Any ideas as to why this may be the case?  I need to use the extended network of the Hub of sky wifi is very low when the TV is.

  Here is the configuration...

  Router-> Airport Extreme-> Airport Express-> TV + Surround Sound

  (Airport extreme is the bridge mode value and the expansion of the wifi network Express).

  Thank you

  Jeremy

  TV: Samsung UE40H6400

  Soundbar: Samsung HW-K650

  Rear speakers on your TV: Samsung R1 2

  I'm not familiar with Samsung wireless speakers, but let me see if I can help. What is the brand and model of your router provided by Sky? You have configured to provide a Wi - Fi network? Is the Wi - Fi network, provided by the extreme and extended by the Express, a second wireless network with a different SSID or using the same SSID as provided by the router from the sky?