Impossible to change the colors of the audio spectrum
I have a simple (I think) problem with after effects CC. When I put an adjustment layer with curves of fx on top of my audio spectrum, it will change color. In parameters of fx audio spectrum when I change the color inside and outside, it works, but I want to use my adjustment layer. Any suggestion would be appreciated, I'm working on my uni project and the deadline is tomorrow morning!
I forgot to mention that in your second screenshot, you have your curved effect applied before the Audio Spectrum effect. Thus, even if she had to work, it must occur AFTER the Audio Spectrum effect.
You need the color of the audio spectrum that results be gray. One way to do that is to apply a fill effect after the Audio Spectrum effect.
This tutorial tutorial can give you some ideas better because it looks like what you're trying to do.
Also, you can use the new Color Vibrance of video Copilot plugin (free) without using the fill effect.
Tags: After Effects
Similar Questions
-
Impossible to change the audio settings
Original title: audio problem
IM using a dell laptop inspiron with one slot for my audio. He used to give me options each time I insert headphone or speaker, etc. now, I inserted the headphones, but I am not heard by cogamers, unlike before. I disabled the prompt where it shows me options so now I can't seem to change the setting when I use my headphones because my last choice was out of the speaker.
Please help me how can I find the option that offers me choices whenever I have insert audio output device.
Thank you.
Hi John,.
Please contact Microsoft Community. I've surely you will help solve this problem.
To better understand the issue, I would like to know what is the number of the model of the laptop?
This problem could occur due to incorrect settings.
Try the steps listed here:
Method 1:
I suggest to run the troubleshooter and check if that helps.
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
Method 2:
I suggest you to make sure that the default audio device is properly set.
a. click on the Start button and click on Panel.
b. type Sound in the Search box and click on sound.
c. click on the reading tab.
d. right-click on the headphones , and then select set as default device.
e. click apply and then click Ok.
See the article for more information.
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
Please help; Impossible to change the position of my wallpaper!
I know this isn't a big problem; but I would like it's working properly anyway. I tried a new image for my wallpaper, and it showed as an image full screen. I didn't like it then, immediately, I went back to the original image, and it was too full screen. I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves. I tried all the different positions and nothing will change. The image will change, but any image I try is full screen.
Hi Newsie,
You can try the following steps and check.
Method 1:
You can read the following article and try the methods provided except method 6 and see if it helps.
Impossible to change the background image in Windows 7
Note: This article also applies to Windows Vista.
Method 2:
You can also try to change the theme of Windows and check.
-
Impossible to change the nationality
Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?
See the next topic If you can't edit your iTunes Store country or region - Apple Support
You must spend your balance before you change stores.
If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.
If you do not have a credit card, contact the iTunes Store support.
-
How to change the audio output for the metronome
Hello
I would like to send the metronome (and speech signals) for monitors to the scene in the ear.
I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.
I tried to follow the instructions of the Manual:
Change the audio output for the sound of the metronome
- Choose the MainStage > Preferences > General.
- In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.
PROBLEM
1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")
2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?
3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!
Rant on (its been a long day)
Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?
Thanks in advance for all advice and my apologies for my frustration. JM
To access the output audio, you need an audio interface with several outputs.
-
How can I change the audio track on netflix
I have the new Apple tv 4. How can I change the audio track on netflix?
Setup of the Apple tv has been replaced by the language I want but Netflix ignores this.
Thanks in advance
If the film has a choice of audio tracks, you should be able to slide down while the film is presented, then select audio in menus that appear.
-
When I go to burn my songs it says data instead of CD disc. How can I change the audio disc?
original title: Media Player
Just a thought...
Well, click on the burn tab should open a menu where you can select any Audio CD or data CD.
-
How can I change the audio device automatically between exits?
Original title: Dual monitor mode
I am currently running Windows 7 Home Premium 64-bit with Media Center and my hardware is Inter Core 2 Quad with NVIDIA GEFORCE 9800GT and an integrated Hauppauge WinTV HVR-1800 ATSC/QAM.
I have two DVI-HDMI, one output to my monitor 24 "HD and one for my 42 '' HDTV and computer speaker are connected to the SPEAKER OUT behind the computer.
The problem is when I look at Internet TV through my computer on my HDTV, I need everytimes switch my Default Sound Source of speakers to the HDMI OUTPUT in my-> hardware & sound control panel and market back when I want to use my computer.
Someone knows how to fix this?
Hello, DuFF1
You can have only one default device.
It is not possible to put two devices by default, nor is it possible to configure the output in default Media Center device. You can try searching for additional Media Center change the audio device by default or continue editing the device default manually before watching TV on the Internet.
You can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Impossible to change the themes
original title: My Windows 7 themes.
I work for several years in the themes of Windows 7 (PRO). Recently & I don't know exactly when, it is locked on a single page of a theme and I can't even change themes. It seems actually them is changing, but the image of the Office remains the same. I have read the forums on this and see that there has been a problem with other people but I don't see a solution.
Steve Hoffman
Hello
Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, the destop wallpaper is not get changed even after changing the theme. We will analyze and identify the cause of the problem.
1. you use any third-party program to change themes?
2. what happens when you try to change the wallpaper manually?
3. it worked before?
4. are you aware of changes to the computer before the show?
Method 1:
Method 2:
If the problem persists, I suggest you perform the steps described in the article:
Impossible to change the background image in Windows 7
http://support.Microsoft.com/kb/2504610
Hope this information helps. Please reply with the status so that we can help you.
-
Change the audio level of many clips in the browser?
I have 1000 or more clips in these images of GoPro project, cameras, and selects music, with many clips that have audio very strong especially the GoPro mounted on the vehicles off the road as they motor at high speed through obstacles. My edit in place includes 20/20 speakers, and even though I have a moderate level of audio that is configured for editing when I select images in the browser that has strong audio I need to stop and lower this clip in the browser at once and he eats a precious time.
Is it possible to change the audio level in many clips selected in the browser?
Select the clips.
Go to the Clip > Audio Options > Audio Gain
When the Gain Audio pane opens, set Adjust Gain of: -12
Click OK. You can experiment on a clip or two to see if this gain reduction is too much or not enough for you.
MtD
-
How can I change [frequency] on the audio spectrum?
How can I change [frequency] on the audio spectrum? I really need an easy way to solve this problem
After Effects has a very limited set of audio tools. Your only option to change the Equalization inside AE is to apply one of the equalizer and then before dialing the audio track that you use to the reader of the Audio spectrum. It's a little awkward, but it keeps all the controls inside the AE and keep them editable.
Personally, if I want to isolate the frequencies I always use the hearing to create an audio layer duplicate that has been optimized for the effect that I need to generate audio.
-
Change the Audio sampling frequency - post audio recording
Hello
Is it possible to change the audio to 2oKHz sampling rate after I taped audio? Is currently 44,10 KHz
Thank you kindly
Ali
I just found this today...
Under "Publish"-> click on the 'more' (button)->-> "Audio" and finally, select an option under "Bitrate:' '.
Bitrate (128 Kbps) CD
Near bitrate (96 kbps) CD
FM Bitrate (64 Kbps)
Custom bitrate (slider that starts at 32)
I changed a course of 68 slides in near CD Bitrate to FM BItrate and size of published file dropped to 50 311 KB 93 288 KB.
-
How can I synchronize a new track to the audio spectrum, effects and audio amplitude logo
Hello!
How do I paid recently a graphic designer to create a sound model for my music on youtube channel, but the problem is that I do not know how to synchronize a new track to the audio spectrum, the effects and the logo of the audio amplitude (pumps logo to the sound of the track that he gave me in the layout) but I would like to synchronize it instead of a new track at all. [Please help:]
Click on the tab "LOGO of MOUNTAIN" or double-click the color icon in the Panel layer to open the publication.
Import the audio file in the project Panel.
Click on the new audio file in the project Panel to highlight.
Click on the 'old' audio file in the Panel layer to select it. (they are both put in evidence now)
Now, hold down the 'Alt' key and then drag the new audio file of the project on the old audio layer panel in the layer panel.
Doing it this way will automatically do all necessary connections to the old file to the new file.
Or... you could just drag the the new audio tracj in the Panel layer compositions 'sound '.
Select the solid layer that has the applied Audio Spectrum effect.
Then in the Audio Spectrum effect setting pane, find the list at the top of "Audio Layer" drop-down list, click the menu drop-down and select the new audio layer.
-
Impossible to change the color of the taskbar
original title: problem of Windows Aero
Hello ~
I can't change the color of the taskbar of the window.When I try to open the desktop > personalize > windows color, it opens the Basic windows color and appearance instead.It only allows me to open the menu aero glass from windows to change the color or transparency.I tried aero, that my computer cannot detect all problems troubleshooting.System Restore did not help either.My graphics card is capable of processing aero and the score is not for aero too.Help, please!Hey! :) What you need to do, is to go to your desktop, right and select Customize. There, it should show you all the themes... click on the theme of landscape or one of those next to him. then, click on color of windows... you should be able to see color options now. I hope this helps! :)
-
Impossible to change the color of the text
I have a simple illustrator document with a text on this subject. The text is green. I would like to add additional text in the document to the exact shade of green that the current text is in. Believe it or not, I can't understand how to do this. I can choose the text I want to be green, and select a color from the menu color chart, but shades of green available there is not the exact shade of green that I need. I tried to select my newly written text, click on the eyedropper tool and then clicked on my old text (which is in the shadow of the Greens I want), but this change desperately police my text newly written in the same font as the original text, without changing its color.
If anyone can help me, I would appreciate it. Please be detailed in your response/instructions. Thank you
I thought about it!
So, in short... the green color you have on the word CAR is a gradient. If you look closely you can see the small pieces of black on the edges of the word. Black is the color of the original text, and the Green gradient is sitting on it like an apparition. It's a bit complicated that you can't just apply a color gradient to live text but here is how you work around it.
1 save the green color (gradient) as a sample by selecting the word CAR and dragging the filling above your Swatches Panel icon.
2. then, select the text you want to change (the word 'In'). Change it there so no fill and no respect.
3. with this same word selected, open the appearance Panel. In the menu drop-down control panel, choose Add new fill...
4. He will choose automatically black. Just open the fill option and choose the shade you did step 1.
5 Bam! This is your desired filling.
6. as a step further, if you want to get rid of the black text which is peeping out, just behind the green on the word CAR use the text tool and highlight the word car.
7. in the fill section, click on the small thumbnail of black to select and then click the option (no white box with red slash) to remove it.
8. here you go, clean lines.
I don't know if you wanted to have a green gradient on your text, or if you wanted just a green color. Here, I saw the solution to apply a gradient to text alive and reproducing the same gradient on other pieces of text.
I hope this helps solve your problem, if it has not already been resolved!
Michael
Maybe you are looking for
-
Mailer Object - specify the Port
Hi all and Ryan in particular. Problems with the mailer. Until about a week ago, the sender has worked well thanks to a third-party SMTP relay service (local ISP requires authentication - with SMTP.com has solved the problem). However, it seems tha
-
How to put in place of the daq hardware several lists on a shield with ecu mc toolkit?
Anyone has the pleasure to set up multiple lists on an ECU data acquisition? I use MC Addon for Labview ECU 2011. I can successfully a single list of acquisition of configuration data and read the data correctly. This method uses the DAQ list mode
-
the Xerox workcentre 3550 network printer status is not available
Having a problem with a xerox workcentre 3550 on a windows server 2008, this doen't impression and shows this error "the network printer status is not available.
-
the csv for excellent data is concatenated to a column
I have a 2D chart, I would like to put in a CSV so it can open in excel. The data which could be the 2nd column is to be straight with the first. I'm not sure why this is happening, I've done this before without a problem. There must be a hidden char
-
Acer lan E5-511-P8C8 port number
past slot windows 8 to 7 OSS and lan port does not work drivers don't work for Lan port any ideas >