Impossible to change the display name - Bug?

Similar Questions

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• How to change the display name

  I don't want my name used I want my used display name

  I had this problem too.

  When you are on any page, and in the upper right corner, you will see 'your name' followed (disconnect), click on your name; that will bring you to the 'page '.

  Depending on where you could put a picture of you is a blue rectangle with the words attached: "Edit profile."

  Click on it will bring you to the place where is the first thing that you fill in a "Display Name" Enter some "Display Name" you want to have the display.

  Good luck!

• Impossible to change the display to the TV, he used to work.

  Original title: LCD/CRT adjustment does not

  I connect normally my laptop to my TV using the key pressed at the same time fn (function) and F5. While pressing the fn button until I reached my desired setting, I press the F5 key. What usually happens, it's my screen goes black, and I am able to see my screen on my TV and my computer at the same time.

  I tried to do the same thing, but for some reason every time I press fn and F5, I can move between settings (from lcd screen lcd/crt TV lcd/TV), but my settings do not change on go back to the initial screen. This means that I don't see anything on my tv and my screen turn black to reflect the change. Al, that the cables are connected as usual, but for some reason any I see.

  Y at - it a reason for this and how can I fix this so that I can see my screen on my TV?

  Thank you!

  Hello, lasuperenana

  What model laptop do you have?
  How the CRT and the TV are connected?

  Assuming that there is a HDMI and VGA output on the laptop, you can try the monitor from Windows XP configuration. See the links below for help in configuring the monitors.

  How to configure and use multiple monitors in Windows XP
  Expand your workspace with multiple monitors

  Activation of the display by using the FN + F5 key is done on the hardware side, not of Windows. It is possible that all screens may not be configurable Windows if display port has been disabled through the shortcut key.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to change the network name to an existing network

  During a recent upgrade of windows 7 to 10 the procedure at about 80% and froze with the error 8007002C - 4000D. Windows 10 not able to complete its update, the system proceeded to reinstall windows 7. Once this is finished, I found that he had lost access to internet, ipconfig address had been changed and a new unidentified network had been set up, which I'm unable to edit or delete. After spending 2 days trying to get this PC to normal with 7. I tried the 10 upgrade again, but with the same result. I can't figure out how to get my PC to Windows 7 because I don't know how I've changed the name of the network in the first problem.

  To explain my network configuration of the PC with the problem Desktop which is Ethernet is connected to a router with 3 laptops wireless and a wireless printer. Laptop computer and printer seem to work fine, and the Office can see these devices but cannot connect to the internet or a network.

  I fixed the IP address of the desktop computer and tried everything I can think but cannot add this PC to your existing network.

  Why Windows 10 cause this problem that I'm not sure, but my main concern right now is to get this PC to its previous state.

  You would be extremely grateful if anyone could offer some advice.

  Thank you

  Fortunately, I managed to solve the above problem.

  After contacting my antivirus software company to find out if one of their customers had the same problem and the reception not good answers. I found another forum that advised people to uninstall the antivirus software and disconnect all external devices such as hard drives external, printers etc.

  After following these tips Windows 10 downloaded and installed without any problems.

  Hope this helps other people with the same problems.

  Thank you

• Impossible to change the network name/icon

  My PC has three available networks. One is the network of the company, the other is a network of Connectify and the third is my guest network only Virtualbox.

  The corporate network and Connectify can I change the names of by clicking on their icons in the network and sharing Center. No problem. But for the network Virtualbox Host-only, I can click on the icon, but I can't type a different name, do not choose a different icon. The text box for the name is read-only, and there is no button 'choose icon '.

  Why?

  Virtualbox Host-only networking is currently showing as 'Unidentified network - Public network' with a bench icon. I don't want that, because it is incorrect. It's actually a * very * private network, nothing public about it, so I wanted to change his name at least.

  Why inappropriate?

  How can I qualify?

  Thank you!

  Hello

  The question you posted would be better suited to Windows 7 IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• How do change the "display name" via PowerCLI order?

  Hi, guys.

  I have a question:

  VCenter-> Home-> inventory-> hosts and Clusters, I select an ESX host and -> configuration-> storage card, we can see several LUN storage.

  

  We usually right click on "name" to change the name to correspond with what we see in stroage side.

  file:///E:/1.jpg

  now, we present 90 LUNS for this ESX cluster.

  I wonder if there is a command that we can change the name of the device?

  I tried get-ScsiLun... and I can get the HLU, but there is no 'name' in the outpur...

  could you help please point the right command?

  Thanks in advance!

  You're almost there, but this method requires 2 parameters.

  Something like that

  $esxName = "vh0034msg01.active.tan" $esx = Get-VMHost $esxName $storSys = Get-View $esx.ExtensionData.ConfigManager.StorageSystem
  Get-ScsiLun -VMHost $esxName -LUNType disk -CanonicalName "naa.6006016061902e0062f2319d68e5e111" | %{
    $storSys.UpdateScsiLunDisplayName($_.ExtensionData.Uuid, $_.DisplayName + " test")
  }
  

• How to change the display name of the application in the device. ?

  Hi all

  I'm using JDE 4.3.0.

  My workspace name displays under the name of the application in the device.

  How can I change this to a different name. ?

  Help, please.

  Thank you & best regards

  Narendra

  You can change it in the file jad RIM-COD-Module-name:...

  See you soon...

• Why does not display the display name on posts instead of the username? How can I deprived to change my name?

  Is this possible without the info display?

  The display name appears only on your profile page.
  
  Yours is here:
  https://support.Mozilla.org/en-us/user/709829

  If you want to change the display name, go here:
  
  https://support.Mozilla.org/en-us/users/edit

• How to change the domain name on the host target

  Hello!

  I need to spend a couple of machines in a new area.

  Is it possible to change the field to a GC host or what I need to remove and add?

  / R

  Unfortunately, there is no good way to change the host name.   You can change the display name with EMCLI change the target, but below would be inaccurate, because it would still be the old domain.   Can you create a DNS alias so that it can still be used with the old domain?   Otherwise, delete and rediscover is the only way that I can see.

  You can use this to remove and readd without reinstallation:

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/appdx_repoint_agent.htm#BABICJCE

  followed by

  emctl start agent

  emctl security officer

  emctl config agent addinternaltargets

• Impossible to change the name of the Table in figures

  I'm unable to change the title of a table, when I change the title name and press on enter it reverts to the original title. I tried to click away and save the document, but both go back to the original title. The only way to work is, it seems if the option a table a few times then start trying a new title.

  This can happen when you have a table with the same name on the same sheet.  Numbers of refuses to accept the name "double".  Check the names of the tables on the al sheet again.  One way to do that is to click the right part of the tab "" at the top with the sheet and inspect the table names in the drop-down menu that appears.

  SG

• How can I change the display of the name of our community

  I want to change the full name of our community, but don't know how. can change at all?

  As community administrator, you have many options of customization of the community, to change the Visual theme of the site to change community privacy policies.

  Socialcast uses the name of the brand community emails sent to users in the community.

  To upload a logo file customized, click Admin > theme.  To change your community name, go to Admin > settings.

  If you decide not to download a custom logo image, Socialcast will use the name of the community as a default logo in the upper left corner of each page.

• Satellite M70 354: how to change the display?

  Hello!
  My TFT-Display of my Satellite M70 354 is physically broken. So I need a new. The Servicepartner costs of a new view without working time are EUR 450,-(!). It's too.

  Is a change to myself as possible, or is it very difficult? On Ebay, I found a screen, compatible with an M70... What is important in changing the display?

  Maybe you can help me.
  Thank you!

  You should know that the display is one of the parties outside the laptop computer motherboard expensive.
  The costs are huge, as you can see. Of course the 450 bugs is too but it is a new LCD and additional, you will pay for the technician.

  That is why it s a good idea to look for second hand unit. The replacement of the screen is a little tricky. You must remove the plastic frame that attaches around the screen.
  The display is usually fixed with 6 screws and connected to the Board of Directors and FL inverter.

  I think that you should not replace yourself. I see that you have no much experience on these replacements. So the best idea is to buy a second hand laptop but then to ask a technician for replacement.

• How to change the display of the list of recent jobs on lenovo vibe turned?

  Hi, I looked everywhere in the settings to find the way to change the display of list of recent jobs...

  I used to use the stacked styles, and out of nowhere, there is a menu to change the styles, now it displays the app recently opened next door...

  I want to go back to stacked style, but I don't know where was the setting. I've looked through all the options setting, but can't find it.

  Please help me to locate, cause it's really bugging me.

  Welcome to the Chriz_sese forums!

  Go to settings-> display-> Wallpaper-> theme Centre-> the first icon in the right-> set Android.

  Kind regards

• Is there a solution of 1 button to change the display language in Windows 7?

  I am tired and sick do not receive do not answer to my question and my anxiety while you post as if respond you. You insult me. You make fun of posting me that you got a response to my concern and question yet I couldn't see any response what that it is displayed on this web page, nor do I found a link to any answer.  You are doing the public a say ' service.  If you are unable to answer my question on the open air, then at least send me an email to * address email is removed from the privacy *.

  Please SEND THIS If POSSIBLE to BILL GATES AND ALL OTHER MICROSOFT GURU OR MANAGER WHO CARES REALLY BRING of BILLION OF DOLLARS EXTRA to MICROSOFT OF the STRANGER.  OR AT LEAST SEND TO ANYONE WHO CARES MORE TO THE SUCCESS OF MICROSOFT AND THE FUTURE.
  My question to which I have still not got an answer was; If "Windows 7 Ultimate" has a button by which we could change the display language for windows with a single click in the computer. To change this through many steps are not an option for billions of nonEnglish speakers who doesn't understand enough about how to do these steps, so they decide that it is not worth to buy Windows in a foreing language to them, so they use just illegal free or cheep Windows copy from one computer to the other. They prefer windows in English, but only at certain times to have display in English and to be able to go to their native language at will. We want a button click on change of English in any foreign language major, on and before each time that decide us or want to change.
  Many steps in trying to change the display language is not an option. I am an English speaker fluent, but I like both French and Spanish. I have XP, but for me it is better to buy the Windows7Ultimate if he proposes a change to the language screen button click in windows. IT IS NOT AT ALL FOR ME TO BUY WINDOWS 7 ULTIMATE IF I Y GO EVERY TIME THROUGH THE PROCESS ENTIRE HEADACHE TO UNINSTALL ALL MY PROGRAMS AND WIDOWS AND INSTALL AGAIN JUST TO HAVE THE DISPLAY OF THE LANGUAGE I WANT AT ANY TIME I WANT.    BILLIONS OF PEOPLE ON EARTH DESIRES TO PASS ENGLISH LANGUAGE MORE THE WORLD AND THEIR OWN LANGUAGE THEY UNDERSTAND BETTER, TO SWITCH YOU AS MANY TIMES AS YOU NEED OR WANT IT, EVERY DAY WHEN DOES.
  It is not practical for us, nor possible because we do not have the time to uninstall windows or a 5 times language pack, or 6 or 7 times a day just so that we could switch between English and French or Spanish or Chinese-Mandarin Hindu SEVEN times per day that we might need. WE WANT to SWITCH BETWEEN WINDOWS DISPLAY LANGUAGE ENGLISH AND ALL OTHER MAIN FOREIGN LANGUAGE 100 TIMES a DAY IF WE FEEL WITH THE CLICK OF A button I LOVE and no one should stop us to do, and I mean that WE SHOULD HAVE THAT OPTION of BEING ABLE to DO so, BUT I'M NOT aware THAT WE DO.
  SO please LET ME KNOW IF I HAVE the OPTION with the HELP of THE OTHERWISE ULTIMATE de WINDOWS 7 IT does IS NOT INTERESTING for me to buy Windows7Ultimate since Windows XP, it's still as good or better.    About 5 billion people on earth or more do not speak English a lot understand enough - well BUT they would like to (and I will) to switch between the English and their (or my) native language in the display of Windows, several times per day whenever we want.
  Have we THAT the OPTION TO CHANGE THE DISPLAY LANGUAGE in WINDOWS WITH a SINGLE CLICK of a BUTTON AVAILABLE IN Windows7Ultimate OR NOT?

  
  That's what I need to know, but no one answered my question so far.  Don't give me more than a link to a web page where I could buy or download a language pack that I would have to install and uninstall 10 times a day if I want to change from English to Spanish or the French and return in English and Spanish, and so on 10 times a day.  This process is stupid and a waste of time and it is not difficult, if not impossible for most of us (of the billion of us). WE NEED AND WE WANT TO CHANGE THE DISPLAY LANGUAGE IN WINDOWS WITH A SINGLE CLICK OF A BUTTON AS MANY TIMES WE WANT EVERY DAY.  IF I PAY MICROSOFT A LOT OF MONEY IT SHOULD AT LEAST BE WORTHED.
  SO GIVE US WHAT WE WANT. ABOUT 5 BILLION OF US SPEAK NOT ENGLISH FAIRLY WELL, EVEN IF WE WISH TO PASS ENGLISH AND OUR LANGUAGES KINDERGARTEN ON, BEHIND 10 OR 20 OR 100 TIMES A DAY, AS WE CAN HAVE THE NEED OF THE DO.  We cannot simply install and uninstall some language pack 10, 20 or 100 times a day else we will not be able to do anything except waste our valuable time.  SO GIVE US WANT WE WANT.
  PLEASE DO NOT IGNORE US.
  PEOPLE IGNORED USES PIRATE WINDOWS WINDOWS TOOK A COPY AND DISSEMINATE OR INSTALLED IN HUNDREEDS OF THOUSANDS OF COMPUTERS. It's in your best interest, not to ignore the poor who are familiar with the English people or foreigners, who believes that if they can't buy the windows with this option (to BE ABLE to SWITCH THE DISPLAY LANGUAGE BETWEEN ENGLISH AND THEIR OWN NATIVE WINDOWS WITH THE click OF A BUTTON AS MANY TIMES as THEY WISH every DAY) , then it is not worth to buy it at all, but not worth it from one computer to the other side even if it is illegal.  This is the case today in most of the countries of the Earth. There are more illegal copies of Windows 98 and 2000 in use abroad as any copy of Windows abroad, for this reason = IT does IS NOT WORTH the MONEY WITHOUT THE SWITCHING "ONE click" of ENGLISH FOR FOREIGNERS AND BACK AND FORTH.
  You want to address this problem through the introduction of Windows 7 Ultimate, where you can change the language with the click of a button and worth to have the original of these windows, not you?
  -I would like to personally, otherwise I won't be wasting my time of Magor write you about the need to switch Windows language display to be made possible by a click of a button.
  IF YOU DON'T CARE ABOUT BILLIONS OF PEOPLE OVERSEAS WITH SUCH NEED AND DESIRE, THEN AT LEAST TO RESPOND TO A FEW HUNDREDS OF MILLIONS OF FANS OF MULTI LINGUIST OR - SPEAKERS MULTILINGUAL; AND DO YOUR MATH BY MULTIPLYING THIS NUMBER WITH $250 BY THE NEW COPY OF WINDOWS SOLD. (IT HAS TO DO WITH BILLIONS OF DOLLARS IN ANNUAL PROFITS). THIS MUST SURELY BE A VERY NICE HIKE IN PROFIT AND IN THE SHARES OF MICROSOFT.  BUT IF YOU WANT TO BE A LOSER OR A SABOTEUR FROM MICROSOFT, THEN GO AHEAD, CONTINUE TO IGNORE THE UNITED STATES AND OUR NEED. MANY OF MY FRIENDS BELIEVES THAT MICROSOFT MINDS AS CLEAR AS THEY ARE, don't ARE STILL NOT BRIGHT ENOUGH to MAKE POSSIBLE TEL NEED AVAILABLE - that is to say: to make possible the switch of the Windows display language from English to another major foreign language with a simple click on a button for us to be able to do is as many times a day as you could want.
  I tell my friends that they are wrong and that you can sell these windows.
  My second question is: ARE they HAVE RIGHT?  OR AM I RIGHT?   WHATEVER THEY ARE, JUST PLEASE GIVE ME ANSWERS TO MY QUESTIONS AND DID NOT GIVE ME ANSWERS TO QUESTIONS I NEVER ASKED. PLEASE, I BEG YOU.
  AND THIS MESSAGE IN ITS ENTIRETY TO BILL GATES (IF POSSIBLE) OR FOR CERTAIN EXECUTIVES OF MICROSOFT RESPONSIBLE AND WISE MAN WHO COULD AND ADDRESSES THESE ISSUES.   IF YOU WANT OUR MONEY OUTSIDE CANADA, PARTICULARLY OUR EUROS, THEN TO GIVE US WHAT WE WANT.
  A FRIEND far AWAY WHO JUST SEE WHAT I AM WRITING TO YOU, SAID: "IF THEY are not, THEN THE _ WITH ALL THEIR NEW WINDOWS BECAUSE WE're NOT GOING to BUY EVERYTHING FOR THE NEXT YEARS of 1O if IL VA y BEING MORE UPDATES OF OUR XP is or NOT."
  About me... maybe I'll stick with my XP for ten years but I could probably use it for the next seven years UNLESS I could buy a copy of the window earlier that allows the windows display language can be maneuvered with a single click of a button between English and French and in Spanish as many times as I wish every day and will without wasting my time to install and uninstall packages of language or reinstall the windows and all other programs I have installed in my computer again and again.
  Well, I hope you could help me with some concrete answers to my questions and good advice about this. IF you do not have available answers to our needs in the "Windows 7 Ultimate" then we should just waith for the next Windows coming after 7 Ultimate WITH the HOPE that you will take care of the major needs in the Windows thereafter, that follows after Windows 7 Ultimate.  Thank you for your time and I'LL WAIT for a RESPONSE FROM YOU.

  Hello danobadiah,

  Thanks for posting on the Microsoft answers Forum.

  I merged your nine positions in your last message as they treat everyone the same questions. You had your questions answered several different people in order to help answer your question. The answer to your question, "Windows 7" has a button by which we could change with a single click, the display of the windows in the computer language is 'no '. There's not a single button to make such a change in the display language in the way you described. Persons responding gave you the common way to the Windows 7 operating system works by changing from English to another language. We are not the developers in this forum and do not know if your desire to have a one button click on any major foreign language switch from English is a possibility.

  This is not the right forum to ask your question on a design change. If you want to offer developers a way to change the Windows 7 operating system, and then publish the Web site so that you can give your comments in future versions of the operating system.
  http://connect.Microsoft.com/default.aspx?LC=1033

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think