Impossible to create accessible folders writable on a shared drive because the 'read only' attribute is slways and cannot be deleted.

Similar Questions

• I have a laptop running XP pro with office 2003. All of a sudden all the folders and files in the folders have read only attribute applied.

  This make all folders on the computer and all the files stored inside. The individual files are not performed. If I remove read-only folders and files and click OK, reopen the file and the attribute has been applied.
  Any solution to this problem s.

  Dave

  It's not a problem... it is a feature.

  At a time in the past, Windows has decided that the read-only attribute means nothing, because it applies to files, so Microsoft 'solved' this bit to indicate to whom the file has been customized.  There are other methods available if you really don't want to do a write-protected file.  The details are explained in the following Microsoft KB article.  I recommend reading the article in full to understand what Microsoft did...

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
      <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• Cannot turn off read-only attribute. Only perform the media folders.

  Yesterday, I noticed that all my files storage of media, that is to say, photos and music, hear the read-only attribute.  When I try to stop, it acts like it is trigger attribute, but it doesn't.  There is a lock on these folders icon.  I have administrative permissions.  It is not limited to a single physical disk.  It affects the files on two different disks.

  Any suggestions would be much appreciated!

  Hello

  See the following article for a description of this problem.

  326549 You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• I don't then create a new folder on a flash drive as the NewFolder button no longer works. Are we supposed to now call a folder a Briefcase?

  I don't then create a new folder on a flash drive as the NewFolder button no longer works.  I have to select the napkin instead of NewFolder; so, I get an icon Briefcase instead of a folder icon open when I open the flash drive.    Are we supposed to now call a folder a Briefcase?

  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two patches.
   
   
   
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  Or:
   
   
  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   

• 'Read only' look for files and folders

  I think a virus entered in my computer and changed 80% of my documents and files in a 'read only' appearance, even if they are still available to make changes and can be saved with the changes. This has happened after the repair of the system by restoring to an earlier date.

  1. Why do you have this happen: was it really a virus?

  2. How can I go back to the previous 'typical' aspect of the documents and records?

  Hello

  What security program is installed on the computer?

   

  Method 1: Strange behavior could be due to the virus.

  Since you can now access files and folders, you can run the virus scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: You can also check:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

• 12.2.4 creating a requisition internal error (error of calculation of the tax: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction).

  Hi all

  I have created a new configuration of client and location. Now try to create IR and get below error.

  ----------------

  Error: The tax calculation: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator.

  --------------------

  I've made a few changes by looking at Doc-ID 1385936.1 and community discussions.

  Ran "Name geography program SEO" and the journal looks very good. No registration rejected.

  +---------------------------------------------------------------------------+

  From simultaneous program ' geo referencing worker name: 1'

  Start 08/07/15 07:44:56

  Treatment for the Table: HZ_LOCATIONS and run Type: ALL

  Parameters: Country Code: U.S.

  Use code: all THE

  Location Id: NULL: location Id: null

  Start date: NULL: End Date: NULL

  Number of workers: 1

  Total number of records of location of treaties: 7319

  Number of records managed: 7319

  Number of rejected records: 0

  Name of georeferencing process completed successfully

  +---------------------------------------------------------------------------+

  But still, I get the same error during the creation of IR

  Someone help me please by looking in the uploaded screenshots. Incase if any additional necessary information, pls let me know.

  This is related planning tests for this customer, I don't know about this part of the tax.

  Any help is really appreciated. Thanks in advance.

  Akshay

  PS: This is not the sensitive customer data.

  Hello Akshay,

  Can you please follow the note Transaction Workbench error: System cannot determine your location for information
  This location and cannot derive from a tax jurisdiction (Doc ID 438718.1) and see if that helps

• Impossible to draw AP Div Panel to insert, as described in the tutorial "classroom: basic Site layout and Navigation in Dreamweaver.

  I tried to perform the draw AP Div from the Panel to insert as described in the tutorial "classroom: basic Site layout and Navigation in Dreamweaver", but this option is not available/visible since my last update t CC of Dreamweaver. The only notable thing is that the trainer uses a Mac version of the software. Help!

  CS4 is 6 years old and more.  Much has changed in the web standards and Dreamweaver since then.

  APDivs have never been a good or reasonable way to make primary models.  Today, they are downright impossible in sensitive web designs as in APDivs content is removed from the normal flow of the document.  See the links below for more details on why to avoid the APDivs.

  http://www.apptools.com/examples/pagelayout101.php

  http://CSS-tricks.com/CSS-beginner-mistakes-1/

  If you work with DW CC, you find tutorials to match the version of your product.  CS6 differs greatly from CC and CC 2014.

  Create your first web site in DW CC-

  https://helpx.Adobe.com/Dreamweaver/learn/tutorials/how-to/first-website-part1.html

  Nancy O.

• Impossible to do a clean install on a Partitioned drive C - the screen of the Machine is a "black screen" after Microsoft NVidia driver updated optional; Cannot roll back.

  Some time before, Microsoft had an optional update for the NVidia graphics driver on a 32-bit F3V ASUS laptop.

  Prior to that, everything worked perfectly. The only problem was with this 'bad' optional driver update that was installed once before; and got the black screen, but managed to make it back this time.

  The machine has two partitions; both have a defined password.

  I lost the password to one of them and have no backup.

  Until the black screen, antivirus updates have been updated.

  The equipment works properly.

  Other than a slight overheating issue while games graphics w/3D acceleration (83 degrees Celsius), the machine works pretty much perfectly.

  The machine display perfectly in safe mode.

  Done the following:

  (1) roll back; has failed because the regular (important) Windows Update has not created a restore point * and * previous restore points had been erased.

  (2) the Startup Repair (without and then with the Windows 7 installation disc). Message says "unable to repair.

  (3) w/installer disk, went to the command line as an administrator, tried to format c: received message "there is not enough space on this partition. Please allocate more space, and then try again. "

  (4) boot safe mode with network, downloaded and successfully installed the updates of the NVidia - graphics driver and still have the black screen to normal startup.

  Went 5) for computer management and cleanmgr without success.

  I'm almost ready to consider a shop.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

• cluvfy returns the "/tmp/" path does not exist and cannot be created on nodes

  Hello
  I'm installing Oracle RAC for SAP to AIX 5 L.
  After performing due diligence for the installation of cluster service, it returns the following message:
  "/Tmp/" path does not exist and cannot be created on nodes
  This meessage happens after checking access node and the phases of user equivalence.
  This is my complete log:
  pr_bd01/oramedia/clusterware/Disk1/cluvfy / > stage pre - crsinst - n pr_bd01, pr_bd02./runcluvfy.sh
  
  Conducting due diligence to install cluster services
  
  Audit accessibility of node...
  Verification of accessibility node from node 'pr_bd01 '.
  
  
  Verify the equivalence of the user...
  Check of user equivalence passed for user 'oracle '.
  
  ERROR:
  "/Tmp/" path does not exist and cannot be created on nodes:
  pr_bd01
  Audit will proceed to nodes:
  pr_bd02
  
  Check prior to the installation of cluster service failed on all nodes.
  
  The directory/tmp is a shared file system and oracle user can write and read
  User Oracle ID is the same in both nodes
  The dba group ID is the same in both nodes
  Oinstall GID is identical in the two nodes
  The primary group for the user Oracle is oinstall
  
  Where is my problem?
  
  Thank you
  
  Published by: user8114467 on 02/27/2009 07:17

  You can also run with - verbose flag - what is the difference between / tmp on 2 machines - define export CV_DESTLOC = /.

• I don't see any emails in the archive folders that I created in my 'local folders' or on my main drive once the e-mail has been moved to the appropriate folder.

  I change a POP server an IMAP. I changed the location of the archive to be in my 'local' folder on my computer and installs the files and folders to the new location of archive. I have subfolders appear under the local folder 'tree', but when I look into them they are empty, except for the most recent. All my files from 2013-2015 are empty.

  Now when I open "Explorer" to search in the directory that I did for my local folder location, files are there and so are emails... way of sorts. They are not separate emails, each folder contains a large super file. When I try to open this file, it just opens as if I try to send an email and the file is linked as an attachment.

  When I try to go into the file--> open--> recorded message etc there is no emails to open and no record. Is there a way to see my archived messages using the open saved email? Is it possible to see the emails in the folders in the tree view under the Local folder in the Thunderbird application? I'm afraid I can have lost 3 years of archives if I can't, and I really need TO HAVE your emails. Any help would be appreciated. Thank you.

  I have lost 3 years of archives

  Have you created a backup of your Thunderbird profile before starting changes?

  I change a POP server an IMAP.

  This change has already happened or you're going to do?

  I changed the location of the archive to be in my 'local' folder on my computer

  Please explain in detail what you were doing.

  and moved the files and folders to the new location of the archive.

  Please explain in detail what you were doing.

  on your screenshot of Internet Explorer, you have for example a 2014 (without file extension) file. Who is supposed to be your mail. But he has only 140 KB in size, so there may be a lot of mail in there. The 2014 file is supposed to appear as a 2014 folder in Thunderbird, but it's not. So, what is the content of the file 2014?

  There is another file 2014 ' Archives' with a size of 1.7 MB. It looks like he has mail in it, and it appears as a folder in Thunderbird. What is the missing mail? If this isn't the case, whence this file?

  Essentially in the same goes for the 2015 * files. "What is ' Archives 2015 - shortened? Have you created the shortcut? If so - why?

  What is the empty file 'Email Archives' for? How she came here in the first place?

  And why did you put the holding the filter rules file in the folder to archive?

• Within the last week, that all the folders and files on my hard drive were selected 'read only '.

  I unflagged all the folders and files that I share on my home network, however, I am not able to rename them or save them on my PC from my laptop on my wireless network. This has happened since May 12 and I suspect an auto update changed or recover from something.

  Running Vista Home Premium SP2 on PC

  Laptop is Windows 7

  Thanks for getting back to me Mick!

  I did a restore to 5/10 when I had no problem, but the problem persisted.

  I'll have to try Norton support. This may be something they did.

  In the meantime, I managed to change the names of files by connecting to the PC with the account of my wife who as co-owner had equal rights and the sign of the laptop is its ID as well so it worked, but it isn't always fair.

  Once again, thank you...

• read only attribute of folders 2008 server R2.

  I can't remove the attribute read only records in 2008 server r2. I have a total control over the records, have tried regedit, also cmd with attrib - r. Please, can anyone help?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Impossible to check updates, error: the site has encountered a problem and cannot display the page you are trying to view

  Original title: cannot update Windows after reformatting laptop IBM T42 Win XP

  The website has encountered a problem and cannot display the page you are trying to view. "

  I reformatted computer IBM T42 with Service Pack 2 and now I can't update Windows when I clicck on Express or custom< iget="" the="" following:="" "the="" website="" has="" encountered="" a="" problem="" and="" cannot="" display="" the="" page="" you="" are="" trying="" to="" view.="">

  Install Service Pack 3 first:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

• Impossible to update [error number: 0x8007007E] the website has encountered a problem and cannot display the page you are trying to view.

  Windows XP SP3, IE 8, trying to update at microsoft

  I tried the file system checker and suggestions that I could find and nothing has worked for me. Finally, I used Acronis TI back to when I was able to update manually. Took me about 3 hours, however, to get back to where I wanted to be. Now it works!
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/0x8007007e/69695be2-A322-4C67-9131-66d34c2198fd

  Re: FileNotFoundException 0x8007007E

  The solution is in the error message «...» FileNotFoundException' means there is a missing file, that is, one of the files that depend on your program is not deployed.

  Run the SFC/scannow to verify that there is no corruption in the system.

  http://support.Microsoft.com/kb/929833>

  Run CheckSUR to verify there is no package system who are damaged.

  http://support.Microsoft.com/kb/947821>

  A repair install is that the usual (Checksur.exe) solution does not work.

  If the system update tool does not resolve the problem, you will need repair Windows.

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  This tool automates the most common fixes problems with the Windows Update site.

  Note this fix it Solution has two modes by default and aggressive.

  You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  The historical section Update http://windowsupdate.microsoft.com> will be white/empty after you run the Fix It in AGGRESSIVE mode.

  This will not effect either by using the Windows Update Web site or via automatic updates update.

  Then reboot and see if the download updates now

  UTC/GMT is 22:24 Friday, may 4, 2012