Impossible to establish connectivity with the administration Server JMX

Similar Questions

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• 'Impossible to connect with the activation server' while trying to activate Windows 7

  Stater of the i run windows 7 on a laptop dell inspiron N5050 32-bit, windows asks me to re-enter my product key each tome I get it it displays after loading: impossible to connect with the activation server, see other ways to activate windows, pls make serious saying my trial period has expired why it cannot connect to the server to check the product key? Help, please

  Original title: activate windows

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Essbase Rapid Deployment - 11.1.2.3 - unable to connect to the administration server

  People,

  I downloaded the files required for Essbase and installed with rapid deployment. The installation was successful, and during installation, it is only requested a deployment password.

  Now, I'm trying to connect to the server using the Essbase administration console.

  That's how I'm doing:

  Start > > Oracle EPM System > > Essbase > > Essbase Administration Service > > start the Administration Console Services

  This opens the console, however, when I try to provide the following as the connection information:

  The admin server: name my PC

  Username: admin (when configuring any username as requested)

  Password: password deployment

  I get a "cannot connect to the Administration Server.

  Oracle services seem to work very well in "Services.msc".

  I also tried to start services using "C:\Oracle\user_projects\epmsystem1\bin\startEPMServer.bat". I get this message:

  Sunday, June 22, 2014

  13:09

  From EPMServer.properties

  Apache Ant version 1.7.1 compiled on June 27, 2008

  BuildFile: C:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\instance\sta

  RT.Xml

  Finishing EPMServer.properties

  Sunday, June 22, 2014

  13:09

  I am able to connect to Essbase Studio using this user name and password. However not to the Oracle DB.

  Any help would be appreciated. I'm a newbie when it comes to installation.

  Kind regards

  If it is a rapid deployment and web apps all work on a default port 9000 which means that when you enter the administrator of the server you must enter in the format of servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Outlook express crashes when connecting with the mail server

  Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

  Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

  Steve

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• howmany oracle user to connect with the oracle server.

  Hi all
  
  howmany oracle user to connect with the oracle server.
  I want to search for above sentence.

  Select the user name, count (*) from v$ session group by user name;

• Could not connect to the administration server.

  Hello... IAM trying to connect to the server of the EAS and Essbase-Essbase administration console server... It's error "Could not connect to the administration server", although all services are running (I kept services such as manual and all the services manually started)...
  A few times I can connect to the console and a few times not... anyone know what could be the error... Thanks in advance...

  Hello

  You can see "Services of Administration Hyperion" as a service. It can show "start" State. But again, reboot by right-clicking on it and try to access environmental assessments.

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• Not able to connect with the Security Server

  Hello

  IM setting up a demo with view 6 environment, and when I try to connect locally on the servers of connection it works fine, but when I try to connect to the Security server fails with the image below.

  

  The Security server has 2 network cards, now in the DMZ and in production. I guess I should also be able to connect directly to the ip production, but the same error.

  We have disabled the firewall between dmz and prod for troubleshooting, but same problem.

  The image below is the Security Server, the addresses here are the ip 'internet', I guess it's true?

  

  The image below is the connection to server 1, the addresses here are internal, and is the FULL domain name, if it was "internet ip" instead?

  

  If I try on the spot to connect to the ip address of prod on security with internet server explorer, im able to connect, but when I select the office that it will fail "cannot display this page", then shows the 'internet' ip in the address field.

  I guess there is just something simple I've missed... hope you understand my question

  Thanks for the support.

  If you do not already have a look at this description of the display configuration, it covers remote access via security servers as well. Setting up remote access with a view PCoIP 4.6 and newer https://communities.VMware.com/docs/doc-14974

  I guess the fact that you can connect through the servers of connection that the URL you configured in the view administrator for servers in connection is a production local IP address/address?

  External security URL server is also an IP/address of DMZ / external can be solved?

• Unable to connect with the DNS server

  Recently, I went away for the weekend and came back to find that I had no internet, on all devices... So I don't know exactly how long he was out. I'm a computer and a network engineering student and I've tried everything I can think of to make it work again. Here's what I did:

  First off troubleshooting generates an error message: "failed to connect to the DNS server.

  Of course, I did reboot of the habit of my router and my devices.

  I can't connect to WiFi or direct connection via Ethernet. I tried flushing DNS via the command-line ("ipconfig/flushdns") as well as the command "netsh int ip reset", "ipconfig/release" and "ipconfig / renew." I tried to go into the settings of the network adapter and the two affecting the IPv4 and IPv6 DNS google DNS settings. I even traded my router for a new with my ISP (of Roger (Canada)). I have connected to my router through my web browser and tried to change some of the DNS settings there (everything went well). Nothing worked so I have everything set to default. I tried ping around my own network, I ping my own card NETWORK, but also the entry door, so I know that's not my PC, I have also excluded because all my devices do not work. I spoke with Rogers (my ISP) twice now and they were no help at all, they were more concerned by the flashing lights on the router as the real problem. I'll have a technician to the course to watch tomorrow, but I doubt they'll be any help at all. I wouldn't say I'm a computer genius, but I have a pretty good understanding of how things work and I can not understand what the problem is here, I can have forgotten something or forgot to mention something I tried. But if anyone has any ideas, or similar cases they decided that I would be VERY grateful for the help.

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  There could be various reasons for which you will not be able to connect to the Internet. And I'm glad to know you have try more troubleshooting steps to solve problems.

  1. which antivirus program is installed on your computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link and see if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the update after trying the steps above.

• Creating a domain with the administration server on a remote computer

  Hello
  
  I do not understand how to create the following architecture:
  
  physical machine #1: installation of weblogic server = > for the administration server
  physical machine #2: installation of weblogic server + OSB = > for the osb server 1
  physical machine #3: install the weblogic Server + OSB = > intended to be the server of the osb 2.
  
  If I create my machine field #1 I don't see any options of the OSB in the product list (I tried to copy all the pots in the directory of models of the installation of the OSB on machine #2, but it doesn't seem to work) so I can't create a domain for my server osb.
  If I create my #2 machine field, I see all the options of the OSB in the product list and I can create my domain but I can't make a pack / unpack the machine #1 because I have an error message so I don't know how do to transfer my domain name to the #1 the machine and then start the server administration here.
  
  All of the documentation I find examples with adminserver running on the same physical computer as osb 1.
  
  Could someone point me in the right direction?
  Thanks a lot for your help
  Emilien

  Hello Emilien,.

  You must install the same products on 3 servers for this to work.

  It also means that you need an additional license for the #1 server, so that may be an expensive route for :-)

  What about Peter

• the CDRW would connect with the Gracenote server during extraction of CD?

  I use an old 6 x 4 x 6 (2001) CDRW on my iMac for my iTunes cd Ripper. I have a problem with the information on the transfer of (artist, song, album) cd from the Gracenote server. The external CDRW would prevent somehow information that reach the server?

  N °

• Update 4.0 RC 1 is offered every day, but refuses to connect with the download server. iMac OS10.6

  The link to update to switch the display, but I'm just 'connection' and it never connects.

  There is no update scheduled for Firefox 4.0 now.

  There could be security/stability bug fix updates for 3.6.*/3.5.* in a few weeks, however.