Impossible to find connect them drive HARD Light and Power light after the change of office case - I got my answer

Similar Questions

• Desktop computer drive HARD problems, won't load after the splash screen only in black

  Hi, I hope someone here can help me. I have HP Pavilion dv2000 laptop I had for nearly 4 years. These last 4-6 months I get questions such as getting the BSOD (usually unmountable_boot_volume) and excessive delay/hanging while working. I was able to fix these with chkdsk and sfc since no virus was detected. But I couldn't make the successful restore points as they always disappear.

  But last night I forced him to close due to the hanging again and rebooted, it upward to get "a disk read error has occurred. Press ctrl + alt + del to restart"only to receive the same message again. Not far enough, he won't do a chkdsk or sfc. So I went to use my bootable usb key with a recovery console to run chkdsk, startup repair and sfc. He managed to get through the bios and was able to connect to my computer, but it would not load the office. It's just a black screen with my cursor. Going even in safe mode it will appoint the task bar, but soon, to get an error "windows Explorer has stopped working".

  I don't know what to do anymore. It would be great if I can just get into my HARD drive one last time. I've saved most of my files knowing he would die on me, except a few files and just need to run once more to save them. Would appreciate any help, please!

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-boot-disk-startup-disk-and-why-would-I-need-one

  Method 2:

  If the previous step fails, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  You may be able to save files if you are able to use system restore tools. Follow the steps in the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  If you can not view files by using System Restore hard drive is dead

• Satellite A300-PSAG8E - drive HARD light flashes even when I do nothing

  These are my problems

  1. my HARD drive indicator flashes even when I do nothing (flashes every half second or more)

  2. when I go somewhere my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.

  BIOS upgrade to the version 2.20

  OS: Windows 7 Ultimate
  Laptop: Toshiba Satellite A300-PSAG8E

  Someone knows the solution?

  Need help please! Thank you

  > 1. My drive HARD light flashes even when I do nothing (flashes every half second or more)
  Even if you n touch cell phone t, the disk is running and different applications, access data. Applications and processes that are running in the background cause this blinking. Notes; This isn't a problem!

  > 2. When I go somewhere, my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.
  Disable the support by modem and disable the settings turn off the screen while the laptop is not in use. This is possible in the Windows 7 power management.

• 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373

  Does anyone know the significance of the errors 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373 that occur when you run Apple Hardware Test (AHT)?

  I guess it has to do with the hard drive by noticing the "HARD drive" code. IMac 27 "mid 2011 EMC 2429 3.1 GHz Intel I5

  Thanks for the reply.

  These error messages indicate cooling fans have a problem.  It is a hardware problem which is best treated in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• How we would use the apps with connecting them to creative cloud and it is not not a trial.

  How we would use the apps with connecting them to creative cloud and it is not not a trial.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• I noticed that my user name in the C drive has disappeared and is displayed under the desk

  original title: save files on the net / backup of the files in the C drive

  These 20 to 30 days, I noticed that my user name in the C drive has disappeared and is displayed under the desk. In addition, whenever I try to save a file on the net on my laptop, this allows me to record only at this location:

  C:\Users\vijai\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\vijai\Documents

  Also in the Solution Explorer, while all other folders category, like documents, pictures, music etc appear in the left panel, these do not appear in the right panel. I also note that a "Application Data" folder appeared under my user name and all files stored in this folder only.

  Can someone help me solve this problem

  Hi, VIJAIRAGHAVANP V,.

  You can try the following steps and check.

  Method 1:

  You can try a system restore to a prior restore point before you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  If you are still facing problems then try creating a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with any issue, then check out the following link to correct a damaged account.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information helps.

• If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  Mr President

  If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  My two fields are FLOW AND DR_NAME

  FLOW = ACCT_ID

  DR_NAME = ACCT_NAME

  I created with success of LOV for these fields.

  First LOV gives acct_id in the debit field and second LOV gives the value of acct_name to dr_name.

  How can I report these lov, it's that when I change my acct_id then acct_name also change

  I have these two tables

  CREATE TABLE "NOM"  (
    "ACCT_ID" VARCHAR2(7) NOT NULL ENABLE, 
    "ACCT_NAME" VARCHAR2(50) NOT NULL ENABLE, 
    "O_BAL" NUMBER(13,2),
    CONSTRAINT NOM_PK PRIMARY KEY ("ACCT_ID")ENABLE
     
     );
  CREATE TABLE "VOUCHERDET" (
    "V_ID" VARCHAR2(9) NOT NULL ENABLE,
    "LINEITEM" NUMBER ,
    "DEBIT" VARCHAR2(7) , 
    "DR_NAME" VARCHAR2(50), 
    "CREDIT" VARCHAR2(7) , 
    "CR_NAME" VARCHAR2(50), 
    "PARTICULARS" VARCHAR2(100), 
    "AMOUNT" NUMBER(21,2),
  CONSTRAINT VOUCHERDET_PK PRIMARY KEY ("V_ID","LINEITEM")ENABLE, 
  CONSTRAINT PUR_SAL_LINE_POD_FK FOREIGN KEY(PROD_ID)
    REFERENCES PRODUCTS (PROD_ID)ENABLE,  
  CONSTRAINT VOUCHERDET_DEBIT_FK FOREIGN KEY ("DEBIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE, 
  CONSTRAINT VOUCHERDET_CREDIT_FK FOREIGN KEY ("CREDIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE,  
  CONSTRAINT VOUCHERDET_V_FK FOREIGN KEY ("V_ID")
     REFERENCES "VOUCHER" ("V_ID") ON DELETE CASCADE ENABLE
    );
  
  

  Concerning

  so, instead of this second ActId, choose ACCT_NAME:

  

• H9 - 1215t: connect a drive hard 3rd

  I have a H9 - 1215t with a motherboard IPMMB-FM (Formosa) (http://support.hp.com/us-en/document/c03132942 - 4 Sata connectors on the motherboard are used for 2 hard drives and optical drives 2.

  There is a SATA5 open (black) and a SATA4B3 (red).  It seems that these ports require a different SATA data cable that you used for the SATA - 4 ports 1.

  If so what cable is needed and can use either of these 2 ports to connect an additional hard disk Samsung SSD 850 PRO?

  Data cables Serial ATA (SATA) are standardized.
  There is an eSATA connector, used for external drive connections.
  http://en.Wikipedia.org/wiki/Serial_ATA#Data_connector

  The Formosa Pegatron motherboard has 6 drive x SATA connectors.
  Look carefully AT the serigraphy on the motherboard (torch lighting) markings.

  Two connectors are marked SATA 0-1, these are compliant with SATA III 6 Gb/s.
  Normally used for priming or mirror drive high performance.

  Four connectors are marked SATA 2-5, they are compliant, SATA II 3 Gb/s.

• given HP h8 - 1260T connect to drive hard 3rd

  I would like to add another disk sata hard to crack open in the 'hard drive cage"on my PC. There is an available power cable, but I see no data cable. There also doesn't seem to be anywhere to connect the data cable to the 3rd disc as hard disks 1 and 2 cables and 2 dvd/blu ray optical readers use the only available on the motherboard connections. Is there a data cable sata type 'y' should I use to replace one of the cables to the other hard drive?

  Thank you very much in advance!

  Charles C which worked perfectly... after that I figured out how to attach the sata cable! The new drive is formatted and I appreciate the help!

• Impossible to find, connect to LAN connections

  I have a HP Compaq6720s with Windows Vista. I'm from Sweden and now visit a frien din Palo Alto. When I try to connect to my friends LAN (called JOY) I get the usual list of available wireless network connections. And I get a message that the wireless functions are not enabled. Never happened before so what can that do? Akward to be disconnected from these days. / Nils

  Hi, Nils:

  If you look at the manual on the link below, Chapter 2, page 6, he gives the schema where the wireless button to turn on the wireless (labeled #1).

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c01121178/c01121178.PDF

  Also if you have wireless software, it must also be enabled by using the button "activate" when you launch the program.

  Paul

• MAC - impossible to find "Pictures folder" / Iphoto photo library and open the Iphoto Application at all

  Hi all

  I have Apple devices for a few years now, but I still find it difficult to understand the system. I want to put an end to that, so I finally registered.

  I try to look at the tutorials and read the forums, but I can't find concrete answers to my situation.

  First of all, in my application of Photos of my MacBook, I remove hundreds of photos and videos, then I go to recently deleted screen and I delete them all permanently.

  However my disk space is the same before under 'Storage' summary when I check "to about this Mac". I restarted the Mac and waited for days, the space does not release upward.

  Then I read in a forum and found the following answer:

  Your photos has not deleted because they still exist in iPhoto or Aperture, whatever you use. Photos saves disk space by creating links to the already existing files in iPhoto/Aperture, rather than duplicate. This means that if you want to delete a file, you must make sure that it has deleted all.

  If you can live without ever using iPhoto/Aperture once again, go to your Pictures folder and delete iPhoto Library and Aperture Library . In this way, the only copies of your photos will be those photos, and removing free space on your computer.

  
  

  The questions are the following:

  
  

  (1) after reading this, I decided to look it up in my pictures folder in the Finder to locate the iPhoto library, however it is not there on the left side, after reading the forums, I still cannot locate the iPhoto library anywhere.

  (2) in case I finally find my iPhoto library and delete it, are the images that I see now in the deleted Application Photos?

  (3) another curiosity, when I try to open IPHOTO, the following message appears:

  

  And then after trying the 'search App Store':

  

  I did not need to actually use my iPhoto or App Photos in particular, I do not yet fully understand the difference. I want to just my photos to be stored in ONE place and when I take hours to remove them permanently, get my rear space and do not learn, they still exist elsewhere (iPhoto library).

  Also please help me understand what am I supposed to do with the iPhoto application now that gives me these error messages.

  Thank you very much!

  (1) after reading this, I decided to look it up in my pictures folder in the Finder to locate the iPhoto library, however it is not there on the left side, after reading the forums, I still cannot locate the iPhoto library anywhere.

  The images folder must be manually added to the sidebar.

  Open the Finder preferences:

  • Click anywhere on the empty office to bring the Finder to the front, then go to the Finder menu in the main menu bar, open "Preferences".
    Click the tab of the sidebar and add all the items to the sidebar, you want to see.

  

  Now, open the images in the sidebar folder in the Finder.  Is your photo library in iPhoto there?

  Then drag it to an external drive to make a backup copy, then delete it and empty the trash.  Accidentally delete the photo library.

  (2) in case I finally find my iPhoto library and delete it, are the images that I see now in the deleted Application Photos?

  No, the photos in your library of Photos and the iPhoto library are separate files.  It was created by hard links.

  Hard links are new files, which use the same entry in the table. They store the contents in blocks of same on the disks, so the entries are not duplicated, but if you remove one of the linked files, the others will remain. The storage will be released, when the last linked file has been deleted.

  See this link: Six colors: the (hard) link between iPhoto and photo

• Professional Windows does not see my hard drive during installation and wants to leave the installer.

  installed the new hard drive in my compaq lap top, started the professional windows installation and stops because it cannot find the hard drive. It is in the bios and has passed the tests. My lap top has only a cd/dvd drive, a floppy drive. Not knowing what to do.

  It is probably because you have a hard drive Serial ATA (SATA) in your computer.  These drives did not exist when Windows XP came out and so no drivers for this type of disc can be found in a regular Windows XP don't install.  Windows makes allowances for that by inviting you to press the "F6" key at the beginning of the installation process, but then you must provide the SATA drivers diskette (no other medium will do).

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  There, several articles that explain how to install XP on a SATA drive without needing a disk.  Here are a couple of them:

  "Installing Windows XP with AHCI/RAID F6 of USB drivers only"
    <>http://www.Prime-expert.com/articles/B02/installing-Windows-XP-with-F6-AHCI-RAID-drivers-from-USB-only.php >

  "How to install XP on a SATA HARD drive without a floppy for a laptop drive"
    <>http://www.ehow.com/how_7395338_install-HDD-floppy-drive-notebook.html >

  HTH,
  JW

• How to download again my CS6 on my mac computer, after that my failed drive hard mac and now I have repaired by placing a new hard drive?

  I bought Adobe CS 6 Adobe online in 2011/2012. My hard drive on my mac failed. do not have backup. Now I changed the hard drive on my mac, then I logged on my adobe account, impossible to find the link to download my purchased product

  I would like to re - download my CS6 on my mac that was set after it failed. But could not find the download link on my adobe account. And I'm not interested in creative cloud membership.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.1.1 . 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 |8 mac | 7 mac

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    
    

    [moved from Creative cloud download & install download, installation, commissioning]
    

  • Satego X 200 21U: drive HARD internal not external usable after upgrade

    First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
    After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
    Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

    Hello

    What do you mean by is not usable in my external docking station?

    I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
    Is this good? So what harm s? Is not recognized USB HARD drive or what?
    Have you tried to connect different computers HARD drive?
    Otherwise, to do this

    But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

    Why this is happening?
    The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

  • Qosmio x 300 15 t drive hard master wrong password, but know the user password

    I don't know if it's in the right forum, but I have a problem with my internal hard drive. I put a main HARD drive password and user password using the BIOS HARD drive. Some time later I discovered I have to tapping the bad HARD drive a master twice on the confirmation, as it is coming from wrong when I try to remove it! I can still access the floppy using the password 'user HDD' both within the laptop, but a HARD one master drive value, I can't remove the locks. This means that I can't get out my drive and put it in a USB caddy or access it from another PC or laptop. I backed up all that is on it, so data loss is not a concern, but is it possible to remove the password if you know the password? I don't want to use this drive in my laptop, and then my laptop if effrondrent on me that the hard drive is basically locked on this laptop unless I find a way to get rid of the master password - that would mean the loss of data in the future to come if the laptop is dead!
    The drive is a TOSHIBA MK1059GSM with firmware 50IDF3DMS (I post the serial number). I would just buy a new drive, but as it is a 1000 GB, and they are expensive, I would find a means to correct the password to disk than to spend the money a brand-new car. Like I said, data loss is not a concern, I just want to go to a fully usable state!
    If anyone knows a solution, please let me know!

    Thank you very much for this useful information, samspin!

    I saved this thread in my bookmarks :)