H9 - 1215t: connect a drive hard 3rd

Similar Questions

• given HP h8 - 1260T connect to drive hard 3rd

  I would like to add another disk sata hard to crack open in the 'hard drive cage"on my PC. There is an available power cable, but I see no data cable. There also doesn't seem to be anywhere to connect the data cable to the 3rd disc as hard disks 1 and 2 cables and 2 dvd/blu ray optical readers use the only available on the motherboard connections. Is there a data cable sata type 'y' should I use to replace one of the cables to the other hard drive?

  Thank you very much in advance!

  Charles C which worked perfectly... after that I figured out how to attach the sata cable! The new drive is formatted and I appreciate the help!

• Install a drive hard 3rd for HPE-501f?

  Hi, I just bought this computer and I wonder if its possible to install a hard drive internal 3rd for the HPE-501f, support HDD in it has only room for 2 people, but I really want to get my other hard drive in it.

  Hi Neroz,

  Attach the brackets to your hard drive, open the cover aside and remove the front cover. Check out the tips of 'How-to' HP.  Now follow the instructions to add or replace a CD or DVD drive.

• Can I connect a drive hard thunderbolt to two Macs?

  I have an iMac and my main storage device is a disk hard thunderbolt (double disk RAID).  I also have a mac mini as a server and I would like to set up the service of time machine, but only if it can store backups on the same drive external thunderbolt.  I know there are two ports thunderbolt on the disc, but I guess it can be used only with one computer at a time.  Is this true? Or is it possible to connect the disc both computers at the same time? (Even if it is only used for the service of time machine).

  That's right the led drive only be attached to a single Mac.

  You can have backups from two Mac on disc one hard, if you share the Mac disk drive that is connected. The second Mac then backup over the network to the first Mac who will write the data on the hard drive.

• Impossible to find connect them drive HARD Light and Power light after the change of office case - I got my answer

  I changed my case for reason of cooling, and I can't do the power light and the light work of HARD drive on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a H-RS880-Μatx (Aloe)
  Manufacturer: Foxconn. I found a few spec but not enough details on connector J18.

  The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED.

  Any help appreciated.

  Thank you.

  CeD_B wrote: I changed my case for reason of cooling and I can't do the power light and the drive light HARD works on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a manufacturer of H-RS880-Μatx (Aloe): Foxconn. I found a few spec but not enough details on connector J18.

  The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED. Any help appreciated.

  Hello CeD_B, I'm not familiar with your card connectors mother special façade, however if cables (wires) are inserted in a plastic connector, you may remove the wires and connect them individually. They are usually labeled.

  The son of LEDs for the power switch and the hard disk activity are polorized, which means they have a plus and a downside that should be connected to the pins on the motherboard in the correct polarity.

  If you have connected to power led and HDD led pins on the motherboard and the lights are not just back the sons and the led should light up, and the hard drive activity led should light up when the hard disk is written to or retrieved from the hard drive data.

  While this image is not your motherboard, it will offer an idea of connections pin on some motherboards.

  Search in the second post of this thread.

• Lost volume after connecting the external hard drive

  I had some movies I wanted to copy in one of my sharing folders, so I tied a drive hard usb at the back of my camera, but the nas don't seem to notice. I rebooted my nas and all of a sudden my internal volumes were absent and did not show the external drive and the system told me I have not put volumes in place.

  My two internal drives can be selected for formatting as if I just do a reset to factory... can someone help me re set my volume, I have over my data already out there.

  I guess its some sort of hardware conflict when I joined my outside, there dissregarded somehow my internal volumes.

  Problem solved no. thanks to an hour on the phone with the customer service...

  The naskey was not connected because I took out the usb to connect my external drive. Such a simple thing took all day to figure out.

• I connected an external hard drive to my MAC pro. I want to delete a folder, but there is that no move to trash option shows the jury. Kindly help me on this.

  I connected an external hard drive to my MAC pro. I want to delete a folder, but there is that no move to trash option shows the jury. Kindly help me on this.

  In the Finder, right-click on the drive and select information. Under sharing and permissions have read and write privileges?

• Windows detected new hardware wizard appears each time I try to connect an external hard drive via the USB port.

  Whenever I try to connect an external hard drive into a USB port, Windows detected new hardware wizard will appear. He then not recognize the external drive at all. It does not appear in disk management. In Device Manager, it is listed as a 'device' USB bus controllers not. Under "other devices", there the question mark yellow and says the device is not configured correctly (code 1). External hard drive works fine on other PCs. It's a plug-and-play device. Port and USB cable work fine with other devices. Just this external hard drive has never worked on this PC.

  Hello

  I suggest that you try to remove USB controllers to the clean boot state and control.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  See also:
  http://support.Microsoft.com/kb/310575

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• Computer "not responding" when I connect the external hard drive.

  Hi all

  When I connect my external hard drive to my laptop, it is detected and the icon for the material appears in the taskbar background. But when I go to my computer, it happens that does not. I can always open other programs etc that are not related to the hard drive, but nothing to do with the hard drive "fails". As soon as I plug it on, the laptop starts responding again. I tried it on another laptop and the same thing happens.

  Any ideas?

  Hi Wendall81,

  -How long have you had this problem?

  Follow the steps below:

  Method 1:

   

  Step 1: Boot in safe mode and check if the problem persists.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

   

  Run a check disk on the external hard drive.

  For instructions, see check your drive for errors .

  Note: If any bad sectors are found by running the check disk utility and recovery of the attempt of bad sectors option is checked when checking the disk for errors, data in the bad sector can be lost as they tried to recover bad sectors. Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Impossible to connect an external hard drive

  I unplugged my hard drive of the computer and re plugged. I can feel and hear it runs that power is connected but there is no light on and the computer keeps telling me that it is unplugged. I have checked and re checked all connections. If the wire to the computer could be broken and if so what call? He isn't a regular usb cord. There is a wide connector at both ends.

  Original title: ex hard drive does not work

  Hello Ellen,.

  I understand that you have a problem when connecting your external hard drive to your computer. This could be a hardware or to issue drivers. It is also possible that your cable is defective. You can try to reconnect the hard drive to another USB port. If you use an external hard drive or a hard drive internal SATA cable /IDE cable.

  Please, try the following and see if it helps.

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  I hope this information helps.

  Please let us know if you need more help.

  Thanks and greetings
  Sarandeep S - Microsoft technical support.

• try to connect to a hard drive WD 1 TB

  OK, so I'm trying to connect to a WD 1 TB hard drive and I can't, I can ping by ip address name and I have two other computers that can use the hard drive very well I don't know what I'll do worng all computers is windows 7

  Hi eric242934u2,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect HDD WD 1 TB.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  3. what exactly happen when you try to connect the WD hard drive?

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the fix it tool the link and verification.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I would also ask you to contact the computer manufacturing.

  WD external drive is not recognized or detected in Windows XP after installation and use that also applies to windows 7.

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Can I connect a drive external hard usb to my Sony nsx-46gti and how will it work?

  Can I use the drive hard usb to play, paused as a digital video recorder? I read of this fact. If my tv model does not support this is there a way I can change to? If you can't tell me exactly can you point me in the direction of who can?

  Hi EPK.

  Yes, you can connect external USB HDD compatible FAT to this TV and can use the functions of Play/Pause. Detailed information and functions of this feature are listed below:

  http://Helpguide.Sony.NET/InternetTV/NSX-GT1/v2/US1/04/04-02_1.html

  If my post answered your question, please mark it as "acceptable Solution".

• To the OS to drive HARD internal new internal SDS with 1 single socket (so I can connect only to 1 at a time)

  Hello

  I want to improve my netbook by changing my old and slow a new SSD HDD, but I expect a BIG PROBLEM. My computer is running Win7 Original from an OEM (Dell). Microsoft won't give me an ISO of Win7 OS file because the OEM must (when I enter the key of product before downloading, it tells me that Dell must provide me with ISO). Dell will provide an ISO file or a bootable USB key because their customer support is BAD. The problem is that I have no idea how to do to transfer the Win7OS from the old HDD to the new SSD.

  I considered the cloning of my old internal HARD drive to my new internal SSD, but given that only one of them can be pluged simultaneously (only 1 plug into the motherboard), I don't see how I could do this. I'm not an expert on cloning of hard drives, so you might know something escapes me. IF YOU DO, PLEASE TELL ME.

  Please consider that I also have a HARD drive external that I could use, if necessary, to transfer the OS (example: 1. clone the OS from the HARD internally for the external HARD disk drive.) 2. replace the drive HARD internal with the new internal SSD and 3. Clone the operating system from the external HARD drive to international it SSD. I have no idea if this is possible or how to make STEP 3 of this example. I don't know even if the external HARD disk clone can function as a bootable disc). Also, consider that this netbook is not a CD/DVD unit.

  I would appreciate your opinions, experience and solutions for this problem,

  Thank you very much!!

  Hello

  Thank you for being part of the Microsoft Community.

  Alternatively, you can perform an installation of the operating system directly to an SSD instead of the transfer option.

  Check the below link that talks about the transfer of the operating system to an SSD.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/transfer-Win7-to-SSD-and-other-data-to-a-new-HDD/a0eaeb57-03a5-4dcb-8e2f-e9221800b80e?DB=5

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Back to us for any issues in the future. We will be happy to help you.

• I have announced a new drive hard into my laptop so i that no picture can now connect you and try to get my pictures back

  I have announced a new drive hard into my laptop but I lost my pictures is possible that I can recover by logging into the windows photo gallery

  When you replaced the hard drive, everything that was in the old man disappeared. Of course, because he's gone.

  Reinstall your photos from the backup that you made before you replaced the hard drive. Oh, you save all of your date? Oops!