Impossible to find dynamically loaded VI
I am updating a code of LV6.1 to LV2011. The application works well before you build it and install it on another machine. When I install and run it on the other machine, it tries to open a file of reference, but it can not find a VI named DSA8300.vi. I get the following error message.
Reference VI opened in InitScope.vi-> PATAR.vi->
Path of the VI: c:\PATAR3.0.2\Range_RC3\Plugins\Scopes\DSA8300.vi<\b>
Built Application or shared library (DLL): ensure that all loaded screws dynamically were correctly included in the specification for the application or a shared library build. But I checked the properties of my generation, and the file has been correctly included in the specifications of construction as a dynamic VI. What else can I check? Thank you very much. This thread can be useful. Have you tried searching the forum for you the question? There are others. Tags: NI Software Why is-Visa Interactive Control unable to find or load the visa library I'm using LabVIEW 8.5.1. I recently installed driver VISA tektronix to connect with one of their products. That has proved to be a bad idea. I've uninstalled it one then installed VISA460, but when I try to write a labVIEW driver that communicates via RS232 or USB, I get this error: LabVIEW: (Hex 0xBFFF009E) VISA or a library of code required by VISA impossible situated loaded. This is usually due to a required driver is not installed on the system. When you try to run an interactive control Visa I get an error saying unable to find or load the visa library. Is there anything else I need to download? Any help would be great. Thank you. I had already done this, but had no luck. However, I could be back up and running using Msiblast. This is a great little program. So, if anyone has problems in the future, simply download Msiblast and delete everything has VISA inside and then run the Setup program OR Visa. Thanks for the help. Dynamically loading the file location Hi all Please give me an idea on dynamic locations. At present iam using the localization file it works fine locally, but is new scenario: I need to download the file location on the server side and dynamically change the value. Please help me if anyone has any idea on this? Thank you I'm not saying it's impossible, but I really don't see a way to use the built-in location facility and have the ability to dynamically load the additional locations. My only suggestion is to establish a similar device yourself. If you are looking for something on the basis of this, in addition to the Blackberry application, I was looking at the Android application that uses XML "translation." Using this approach, you would be able to download a new XML file to get a new translation. L2TP - impossible to find a group valid tunnel Hello I'm sure this is a simple solution, but I don't see what I'm missing. Any help please? Get the following errors in debugging. [IKEv1]: invalid tunnel, leaving group = 95.83.254.91, IP = 95.x.x.x, impossible to find a group...! Group of tunnel I want to use is Remote-L2TP Attached config. ASA Version 8.2 (5)
a basic threat threat detection Hello I see same Phase 2 is completed in the newspapers, so more than a customer issue. On the Security tab in the connection on the client profile, check if you have allowed the correct password and security protocols: https://www.SoftEther.org/4-docs/2-HOWTO/9.L2TPIPsec_Setup_Guide_for_Sof... Kind regards Aditya Please evaluate the useful messages and mark the correct answers. dynamically load the Options in a drop-down list in C++ Hey guys,. I'm trying to dynamically load items Option in a drop-down list by using C++. I have a function in my class of WorkManager file that does the trick: I also found this thread:http://supportforums.blackberry.com/t5/Native-Development/Adding-options-to-a-DropDown-from-c/m-p/21... that helped me get the filled drop-down list when the application starts. However, I need to re - fill list from time to time, when the list (a GroupDataModel) changes. calling the function above a second time anywhere in my application appears to hang the application immediately. I think / thought it might have something to do with the slot for the onSelectedValueChanged, but I can't understand it. It seems down right when I do dpList-> removeAll(). I also can't seem to find the right place to call this function to an object of type in my class. I think it's because the drop-down list is not ready yet as the dpList * is always 0 unless what I call after the line: in the applicationui.cpp file. Calling it works on start-up, but trying to update the list later (by removeAll() and recreate) causes the app crashing. is there a better way to do it? .. and make it safer? I can't understand how to do this. Thank you! J First, drop the: Not only if it is not necessary, but it will explode your application if the function is called when there is already no options in the menu dropdown. Also, do NOT delete the task, because it is still owned by the datamodel. I also see that you use type casting C, which just blindly accepts your cast, even if it's a mistake. Instead, if you know for sure what kind it will be this way instead: If you are not sure if the type you are casting the is the type you need, use the dynamic_cast instead: The advantage of this more static_cast , is that if you try to perform a type cast is not compatible, then myTask will be set to NULL. Alternatively, Qt offers a replacement for dynamic_cast which works on platforms where is not regular C++ casts. It is functionally equivalent to dynamic_cast, but as I said, it works on all platforms that Qt exists, whereas dynamic_cast cannot. Once you did get back to us. oddboy wrote: Hey guys,. I'm trying to dynamically load items Option in a drop-down list by using C++. I have a function in my class of WorkManager file that does the trick: I also found this thread:http://supportforums.blackberry.com/t5/Native-Development/Adding-options-to-a-DropDown-from-c/m-p/21... that helped me get the filled drop-down list when the application starts. However, I need to re - fill list from time to time, when the list (a GroupDataModel) changes. calling the function above a second time anywhere in my application appears to hang the application immediately. I think / thought it might have something to do with the slot for the onSelectedValueChanged, but I can't understand it. It seems down right when I do dpList-> removeAll(). I also can't seem to find the right place to call this function to an object of type in my class. I think it's because the drop-down list is not ready yet as the dpList * is always 0 unless what I call after the line: in the applicationui.cpp file. Calling it works on start-up, but trying to update the list later (by removeAll() and recreate) causes the app crashing. is there a better way to do it? .. and make it safer? I can't understand how to do this. Thank you! J Dynamically load content in NavigatorContent inside Viewstack Thanks for help. Question: How do I dynamically load components or inside a NavigatorContent buttons when the user clicks on the Label NavigatorContent appropriate within the viewstack located inside the TabBar component? Code example... < s:Scroller id = "scrollerHome" includeIn = "Home" x = "3" y = "8" width = "933" height = "584" > < s:VGroup width = '100 percent"height ="100% "> < s:TabBar dataProvider = "{viewstackHome}" / > < mx:ViewStack id = "viewstackHome" width = '936' height = '553' > < s:NavigatorContent width = '100 percent"height ="100% "label ="Tab 1"> . . . < / s:NAvigatorContent > < s:NavigatorContent width = '100 percent"height ="100% "label ="Tab 2"> < / s:NavigatorContent > . . . < / mx:ViewStack > < / s:TabBar > < / s:VGroup > < / s:Scroller > When the user click on Tab1 or Tab2 depending on the time of day I want to display a different set of components which vary in number. Is there something that I need to manage, if so how. I could not find in these objects. Other suggestions are also welcome. Thank you Jumroo Since it's content browser, all components are created automatically the responsibility of the application that they do not obey the creationpolicy. 1st way: I could intercept the events of "hide" / "show" on the content of navigator to listen to the event and dynamically add child elements. 2nd way: Instead of Viewstack I'll go with the States of the spark.
and on creationComplete of these components you can manage it that display and what not to do. Dynamically loaded .jpg are pixelated I know that this subject has been discussed ad nauseum, but I tried to find and implement a solution without success. For some reason some of the .jpgs on my flash site that are loaded dynamically load pixelated. I tried to find solutions to this, but I don't know exactly where a quality = better or smoothing = true script should be placed. And I'm just as puzzled as to why only some of my .jpgs load pixelated? It's very frustrating, this is the code I use to load my images, prental help: On the timeline, where the movieclip, I have the following code: in general, it is bad coding practice to fix the code to objects. in your particular situation, it is really bad coding because this loop continues to run for as long as your movieclip exists. you have to attach code to a picture and put an end to this loop when it is no longer needed and you can use forceSmoothing to enable anti-aliasing. Remove the code related to any object that you have demonstrated and replace your code with: _root.image_box_9.loadMovie ("Wave.jpg"); _root.image_box_9._alpha = 0; clearInterval (preloadI); function preloadF (): Void {} totalFrames of dynamically loaded swf I tried for 2 days now to find the total number of images to a .swf dynamically loaded. Here is a code example: I am really puzzled. Any help would be greatly appreciated. I know it's old, but I found via google and thought I would correct the error. You can reference properties avm1 (and methods) swf using localconnection to communicate between SWFs avm1 and avm2, SWF SWF communication when two SWF files uses actionscript 3.0 How the batch of photos of change in Version 2.0 of Photos... impossible to find the function. If it has been deleted to "improve" the Photo experience? Lot, what exactly will change? Titles, Descriptions and capture date - Yes. Select the images you want to change the title or the description and to set-up the info (command-i) pane. Enter the title or the description in the appropriate field and he will be assigned to all selected pictures. If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section. Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option: I El capitan, but stopped opening safari says impossible to find something wrong with the application extension You can open it by accessing it in the Applications folder? If so, you may have a corrupt Dock alias. Click and hold the alias and make it about 1 inch away from the docking station, then release. Then drag the application in the Applications folder in the Dock to create a new alias. When you have a new alias, control - click/Options/keep in Dock. TYPE A USER ID NUMBER BRINGS UP A STORED USER ID AND THE PASSWORD COMBINED IN A SINGLE STATEMENT. It would be built-in to Firefox form fill. I have OSX 11.5 and impossible to find a progress indicator. I have OSX 10.11.5 and impossible to find a progress indicator on any of my pages. I did something to hide or has been eliminated completely? The progress bar appears only when you are writing a large part of the data. What you hear on your pages and why you are looking for? I erased from my hard drive to sell the macbook pro to my father. "" When I go to install OSX I am invited to install OS X El Capitan and it will check computer and a window pops up saying 'Impossible to find information about this installation machine' "contact AppleCare. I have an APPT with the Apple store Monday, but was hoping I could fix myself first. Anyone have any ideas? When you disassemble a machine for sale, the only Mac OS X can be installed without providing WHAT YOUR Apple ID is the original version it comes with. You can not install ElCapitan in this situation, what is left as an exercise for the buyer. Satellite L300D - impossible to find HWsetup, boot from the CD I have a big problem with my laptop. Sound on windows xp, I formatted it. All is well now. I wanted to install windows 7, I bought at the store. I try to install it but the laptop won't boot from the cd. I'm trying to get into the bios, no way to get... I try f2, f4, f8, f12, esc at the beginning that nothing worked. Ive was searching the Internet for more than 8 hours now and apparently I need HWSetup to use my BIOS. No problem, I got it I install on USB (Vista version). When I try to see the priority boot sequence, its empty, I don't see anything. I try to default restor it build a sequence, I moved cd ROM. upward. Reboot, do not work. I see hwsetup and sequence disapeard even once, I tried like time 5 did not work. I though that it was because it's the version of vista and I am using windows xp now, so I tried to find the HWSETUP for windows xp and guess what, IMPOSSIBLE to find. After a few hours trying, I decided to post here. So it is impossible to boot to my cd Oh and yes my cd drive works fine. Please help me! Hi ranmyus, Hwsetup you can download from the official website of Toshiba if you search through Satellite L300D and Windows XP. For Windows XP, but it is called utilities and * not * HWsetup: As far as I know, you can change the boot order in the BIOS if you press the F2 key. It works when you connect an external keyboard? How to query a Subvi dynamically loaded to its input terminals names? Hello I have an application where I use dynamically load the Subvi and I need a way to query the Subvi for its names of input terminals. I'll use several different Subvi now and in the future and will not experience the terminals. Any help would be greatly appreciated. Thank you in advance! Where is the Setup off line 36 of FireFox? The stub Installer cannot go beyond my firewall proxy employers. 34, I could download an offline Installer. I can't find the Installer off line 36. Can I mirror my iPad on TV or Mac computer magazine? Thank you very much! I have a lot of magazines on my iPad (iPad Pro 9.87), some purchased through iTunes, others through Zinio. Not all can be read on a computer. If I could mirror magazine (most with a small print) on a TV, it would be useful. Can it be done? Thank you Several black lines horizontal onprinted Photo I have a HP Officejet 8600 Premium with Windows XP SP 3. When I print the PICTURE on paper ordinary it seems beautiful, but when I use the HP Photo paper it shows several thin black horizontal lines that apart about one inch from each other horizonta Need to retrieve the BONES but do not have the habit of losing data on the HARD drive Dear all! For long time now, I tried to disable a Trojan horse or a worm, on my Windows XP Home (Home!) i.e. get rid of the cftmon_.exe, when I decided to follow the instructions from Symantec and pieces manually deleted from the register, I guess sh Is it possible to lock only some apps like videos or photos? Is it possible to put a password on just photos or videos on the BackflipSimilar Questions
=========================
VISA: (Hex 0xBFFF009E) a code library required by VISA impossible located or loaded.
23 September 14:26:05 [IKEv1]: IP = 95.x.x.x, invalid header, lack of payload SA! (next payload = 4)
!
ciscoasa hostname
domain xxxxx.local
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
name 192.168.1.40 description CCTV system CCTV_System
name x.x.x.x outside outside interface description
description of the SERVER name server 192.168.1.1
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
192.168.1.222 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.252
!
passive FTP mode
clock timezone GMT/IST 0
summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 89.191.34.249
domain xxxxx.local
object-group service CCTV tcp
port-object eq 9010
object-group service CCTV_NEW tcp - udp
port-object eq 9091
object-group service BlackBerry tcp - udp
port-object eq 3101
object-group service NSM tcp - udp
port-object eq 886
object-group service RDP tcp - udp
EQ port 3389 object
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
outside_access_in list extended access allowed object-group TCPUDP any host outside eq 9091
outside_access_in list extended access allowed object-group TCPUDP any host outside eq 886
outside_access_in list extended access allowed object-group TCPUDP any host outside eq 3101
outside_access_in list extended access permit tcp any host outside eq https
outside_access_in list extended access permit tcp any interface outside eq pptp
outside_access_in list extended access allowed esp any external interface
outside_access_in list extended access permit udp any interface outside isakmp eq
outside_access_in list extended access permit udp any interface outside eq 4500
outside_access_in list extended access permit udp any interface outside eq 1701
standard access list for distance-VPN-Gp_splitTunnelAcl permit 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.25.0 255.255.255.192
RemoteVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
VPN-GP_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0
standard L2TP_splitTunnelAcl-Remote Access-list allowed 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask of local pool Remote-DHCP-POOL 192.168.25.10 - 192.168.25.50 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
public static 9091 9091 CCTV_System netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 886 886 SERVER netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 3101 3101 SERVER netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static tcp (indoor, outdoor) interface https SERVER https netmask 255.255.255.255
public static tcp (indoor, outdoor) pptp pptp netmask 255.255.255.255 SERVER interface
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 89.191.53.17 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac trans
Crypto ipsec transform-set trans transport mode
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto-map Dynamics dyno 20 transform-set trans
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto 20-isakmp ipsec vpn Dynamics dyno
vpn outside crypto map interface
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
string encryption ca ASDM_TrustPoint0 certificates
certificate 5eb57b56
3082016a 30820201 a0030201 0202045e b57b5630 0d06092a 864886f7 0d 010105
3111300f 05003045 06035504 03130863 6973636f 61736131 30302e06 092 has 8648
09021621 63697363 6f617361 2e627574 6 c 657274 6563686e 6f6c6f67 86f70d01
6965732e 6c6f6361 6c301e17 313630 39313931 33303732 395a170d 32363039 0d
a 31373133 30373239 5 304531 11300f06 03550403 13086369 73636f61 73613130
2a 864886 f70d0109 6973636f 02162163 6173612e 6275746c 65727465 302e0609
63686e6f 6c6f6769 65732e6c 6f63616c 30819f30 0d06092a 864886f7 0d 010101
8 D 003081 89028181 05000381 008e76a6 2ad8e079 15814471 df2c3309 abdc0ae7
1c665f5f bb09154b 1ac3fd81 930b29cb 6da29338 738c 9373 a0b30f61 a1d08aa9
f5ef926b 11ef1e22 e8beeb5f c6606090 7a71b367 cad571c5 56331678 d83d4bb4
9f98a565 577cccd6 dc20e190 c7128cf2 e38d3ad1 37807440 3da501c2 14bbbe02
45abf677 89248633 d 05589d 4886f70d 01010505 55 75020301 0001300 06092a 86
000a7b9d 00038181 3e29b1d9 8459309b 5e24606a cae0710e b9e264f4 a61125b9
2f431f3a 5c4a9485 fe9bc0b0 9f9f7072 13abd978 243e0542 e34642d6 ae33028d
be03b9e9 56c693ab b082932d b44ab014 9366c0d4 529a7ff5 818f7293 2026521b
52fcf5c7 d623f7fa 54019c 86 e64a4212 08444c 58 8ccd11d8 4297d18a c4b2de33
2003eaf5 e2
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd outside auto_config
!
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP 79.125.112.210 Server
NTP server 193.1.193.157 prefer external source
WebVPN
port 8443
allow outside
DTLS port 8443
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
Picture disk0:/sslclient-win-1.1.4.176.pkg 3 SVC
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal RemoteVPN group strategy
attributes of Group Policy RemoteVPN
value of server DNS 192.168.1.1 192.168.1.2
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list RemoteVPN_splitTunnelAcl
XXXX.local value by default-field
internal strategy group at distance-VPN-GP
remote control-VPN-GP group policy attributes
value of 192.168.1.1 DNS server
Protocol-tunnel-VPN IPSec
XXXXX.local value by default-field
internal strategy group to distance-L2TP
L2TP remote group policy attributes
value of server DNS 192.168.1.1 192.168.1.2
VPN-tunnel-Protocol webvpn
username privilege 15 encrypted v5FJjvsPy8PsIOtZ xxxxpassword
attributes of username xxxx
VPN-group-policy RemoteVPN
xxxxx YeC9t79Bj2E5FxxV username encrypted password
attributes of username xxxxx
Strategy-Group-VPN Remote - L2TP
2KXeP2Ggcoa6BTsozucgAA password xxxxx user name is nt encrypted
remote access of type tunnel-group to distance-VPN-GP
distance-VPN-GP-global attributes tunnel-group
Remote control-DHCP-POOL-pool of addresses
Group Policy - by default-remote control-VPN-GP
tunnel-group GP-remote control-VPN ipsec-attributes
pre-shared key *.
type tunnel-group Remote-L2TP remote access
attributes global-tunnel-group Remote-L2TP
Remote control-DHCP-POOL-pool of addresses
Group Policy - by default-remote-L2TP
tunnel-group Remote-L2TP ipsec-attributes
pre-shared key *.
tunnel-group Remote-L2TP ppp-attributes
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:c4b7c39420a91e2f7bb4adc5e5a8539b
: end
ciscoasa (config) #.
QStringList WorkManager::getListOfItems() {
int i = 0;
QStringList taskNames; // used for debugging mainly, so i can print the list out to debug
QList
app->setScene(root);
dpList->setSelectedOption(0);
Task* myTask = static_cast
Task* myTask = dynamic_cast
Task* myTask = qobject_cast
QStringList WorkManager::getListOfItems() {
int i = 0;
QStringList taskNames; // used for debugging mainly, so i can print the list out to debug
QList
app->setScene(root);
loadMovie ("Wave.jpg", _root.image_box_9);
On the movieclip itself, I have this code in order to create a fade chained in:
{onClipEvent (load)}
This ._alpha = 0;
Speed = 10; change this option to change the speed of the fade
}
{onClipEvent (enterFrame)}
load = this.getBytesLoaded()/this.getBytesTotal ();
if(Loaded == 1) {}
This ._alpha += speed;
} else {}
This ._alpha = 0;
}
If (this ._alpha > = 100) {}
This ._alpha = 100;
}
}
Could someone tell me please how to smooth this image? I would really appreciate it.
_root.image_box_9.speed = 10;
preloadI = setInterval(preloadF,70);
If (_root.image_box_9.getBytesLoaded () > = () _root.image_box_9.getBytesTotal & _root.image_box_9.getBytesLoaded > 100) {}
_root.image_box_9._alpha += _root.image_box_9.speed;
_root.image_box_9.forceSmoothing = true;
{if(_root.image_box_9._alpha>=100)}
clearInterval (preloadI);
}
}
}var loader:Loader = new Loader;
loader.load(new URLRequest("mop.swf"))
master_mc.addChild(loader);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, xmlLoadedF);
function xmlLoadedF(event:Event):void
{
trace(loader.content.totalFrames);
}
IT SHOULD BE DELETED.
IMPOSSIBLE TO FIND ALL REFERENCES TO THE WEBSITE IN THE FILE OF SAVED PASSWORDS.
WHERE ARE STORED THE DATA COMBINED ID AND PASSWORD, AND HOW IT CAN BE CLEAR.
THE WEB SITE IS NOT SAVE INFORMATION.
Click the field, and enter a character. If something comes along,
highlight the fact that by using the arrow keys. Then press DELETE (Mac = delete the shift).
Repeat if necessary.
http://EU.computers.Toshiba-Europe.com
In addition the start menu you can access when you press the F12 key after you have turned on the computer.Maybe you are looking for