Impossible to format cells in numbers

Similar Questions

• How do I format of phone numbers I want in contacts?

  How do I format of phone numbers I want in contacts?

  Contacts is messing up my system. Question: How can I format numbers correctly as before?

  Vogon wrote:

  How do I format of phone numbers I want in contacts?

  Contacts is messing up my system. Question: How can I format numbers correctly as before?

  What do you mean with Contacts is to mess up the system?

  Close contacts and restart the Mac and then reopen Contacts..., what is the result?

• Impossible to format my Sandisk Ultra Plus 16 GB MicroSD

  Hi, I bought this product about an hour ago from Bestbuy. It was sealed in his case, there is no way, it was a homecoming.

  When I insert the SD card with the inside microSD adapter to my computer, it asks to format the drive. Then the Format Windows removable disk appears and says that my card is 30.6 MB... When I click on Start to get in shape, with the default given the options, it returns back that it is impossible to format.

  I tried the SD Formatter 4.0 card. He says that it is write protected, even if the switch is not in write protect mode.

  I have a MicroSD USB Reader. I tried this way too, and it does not work.

  I would like to get assistance.

  I found my problem.
  As well my card reader USB MicroSD and SD of the laptop slot could not format/read it. I don't know for what reason. But they were a couple of years.
  Today, I bought a new card reader. I could open the drive very well and format.
  Hope this helps some people.

• You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read DVDs

  You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive.  able to read other DVDs

  Hi, Virgil,.

  1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?

  2. you receive messages or error codes when you try to format the drive?

  You can check if you are able to format the DVD in another computer.

  You can also read the following article and check:

  Format a CD or DVD

• H:\ is not accessible impossible to format

  Hello

  It's Manu I have 16 GB SanDisk USB key when I insert my USB it showing windows want to format the drive when I clicked it again show an error IMPOSSIBLE to format how I can I solve this problem...?

  Have you tried formatting cmd.

  First try this, type Format H:/q cmd (where h is the drive letter of your)

  USB stick in your case it may be different). It performs a quick format.

  You can also format the key USB by right-clicking Start to go on the computer

  Management then disk management , then you can click right on your

  USB key for formatting.

  If it doesn't not solve your problem, then try on way:

  Right-click on the service Start , and then click the command prompt (Admin).

  Now, in cmd type diskpart , and then type list disk you can see the disk

  number and size to find you which disk is your USB. If you

  don't have not connect another disc Disk 1 then maybe your USB key.

  Type select disk 1 then type Clean . After that, type create partition primary

  who creates the new partition, and then type select partition 1 to choose who

  partition after the category active then format fs = ntfs quick where fs is the

  system files of your pen drive now type assign to assign the drive letter.

  Get out now cmd.

  You can also use the software Hp format or Format usb drive to format

  your pen drive, search it in google.

• Impossible to format the full Volume - Adaptec 3405

  

  As you can see, the unit supports and recognizes correctly the volume of 2 TB, but breast of ESXi is impossible to format a VMFS beyond 45.26 GB volume.  It seems that we are stuck in a total of 50 GB of space on a volume of 2 TB.  Someone at - it ideas?

  Thanks in advance,

  nniemeyer2

  Your volume TB 2.04, VMware is limited to a size of 2 TB - something more volume that wraps to lose the first 2 TB. Then the 40 GB, you can format is 0.04 CT.

  Resize/re-partition your device less than 2 TB.

  H.

• Weird behavior of format when writing numbers in Excel cells

  Hi guys,.

  I am trying to wrap my head around a weird problem:

  I write a double 2D table (decimal separator is a comma, so 1/100 is 0.01) in an Excel workbook. I created this 'Test.xlsx' file by hand and not changed anything about the formatting of the cells.

  

  But what I get in Excel is the following:

  

  Why

  1. is the cell A1 different in the formatting of all the other cells (presentation and justification)

  2 the values in other cells bad? There seems to be a problem with the decimal separator.

  Thanks for your comments!

  Zou > I do not, I think it's yet another situation where NEITHER has not thought of countries who do not have the same decimal as in the United States.

  joptimus > the solution is to power through 'Number of fractional string' table with the parameter 'use decimal system' = false and then do go to Excel table easy.

  Then it won't work.

• value of the cell in numbers displays the date instead of the value of the formula in currency

  I use the numbers frequently and a worksheet I'm using suddenly systematically will display a date (April 30, 2017) instead of a sum value that was always there. I tried to change the cell back to currency format, all clear and reset deleting the formal line and inserting a new formula in another cell, and the problem persists. Have left and restarted numbers and the entire computer. Don't know how it happened, or how I can fix this problem.

  Can you post a screenshot?

  SG

• Can I make the data in a cell in numbers link to a file in the finder?

  Numbers will allow me to create a link to email or an Internet link, but apparently not to the files in the Finder. Anyone has a suggestion to make this happen?

  AFAIK, you can't link to a local file, except via the script, which is awkward.  You can put a file in Dropbox and copy / paste the public link to this file in connection of numbers. By default, clicking the cell number will download the file from Dropbox, which may or may not be what you want.

  SG

• How to format foreign phone numbers in address book?

  Hello

  Can U give me advice step by step?

  The process that works for the address is not for phone numbers.

  Thank you

  Raphael

  He chooses the format of phone number based on the code of country used in the phone number. You must precede the country code with +.

  If you do not have a country code in the phone number, it doesn't use your default location format, or None if it does not match.

• If a cell in numbers is empty then do nothing, otherwise, no sum?

  How to format a formula like this?

  Why not just make sum always: the sum of an empty cell is zero, so an empty cells ads nothing to the sum...

• can I have new paragraphs or lists in a cell in numbers?

  I know it's a spreadsheet software, but only occasionally, I have cells that I want to make a large amount of text I would like to divide, if it is not ideally lists, then at least start a new line. I don't see how though.

  Hi Brian,.

  Hold down the option key and press ENTER to insert a new line in a cell.

  You can select the text and add bullets and lists in Panel Format > text

  Kind regards

  Ian.

• Satellite 2450-201: impossible to format SD card 4 GB card

  Hello

  IA´m an owner of Satellite 2450-201 and I have a big problem.
  I just bought a 4 GB SD memory card and Nice, it adapts to the side slot on my laptop.

  This is the first time using the memory card, so a needs-to-format window appears when I try to access.

  The window has the right information: 3.78 GB, Fat32,...

  I click 'OK' and informs the Windows (XP SP2): impossible to complete format (here is Portuguese, then it is translated into English)

  If the correct size is informed, 3.78 GB, why windows can't format it?

  My laptop is virus and spyware free (only 23 spots in the running and supervision), I have SP2, Bios (most recent) 1.50, SD my controller drivers is up to date (the last and the only one that was released in 2003).

  Also tried third party "Panasonic SDFormatter 2.0". He reports the (physical) unit or the mem SD stick is not compatible with the program. And the same effect occurs: the Sd device lost the nice icon and I need to remove/insert the SD card to see again the same story.

  Help me please, friends.

  Hello

  It of very strange that you re possible to see the plugin SD card. Some people suggested that this SD card supports only 256MB, 512 MB cards and more with no MMC support.

  I put t know if you have a format utility Toshiba SD card installed on the laptop, but on many notebooks of utility such Tosh is preinstalled and could be used for formatting of the card.

  According to some poster in this forum the Portege M400 utility format could handle 2 GB, but not sure about 4 GB SD cards.
  If possible, you can try to install this utility on your laptop, but you know you don't have much chance that it works.

  I think that in this case only an external SD card reader will help you.

• Satellite U400-112: impossible to format the local drive (damaged MFT?)

  Hello!

  I had a pretty serious problem with my HARD drive.
  250 GB HARD drive
  C: 116 GB - NTFS - Windows XP (Vista initially)
  D: 1, 5 GB - NTFS - (Vista Recover?..)
  E: 117 GB - RAW (was NTFS prior to crash)

  Local drive E: MFT have been damaged because of the virus attack (I hope not because of my madness!). It's NTFS, now it's RAW. I got all the necessary data partition with program ZAR, but all my attempts to recover or just the format E: remained unsuccessful.
  None of the defective sectors found on the HARD drive. Standard Windows tool to format the disks fails: 'it's impossible to finish the formatting of E:

  Before this problem with the E: drive, I had several problems with HARD drive. I have never divided re discs, to Partition Magic from the beginning he identified incorrectly. I tried Partition Magic 7 and 8.
  Link: [error screensaver | http://cs1498.vkontakte.ru/u169802/154397/x_3a82b4fb.jpg]

  The problem is that the special programs (I tried "find and Mount") also could not identify partitions to correct the defective MFT. I thought that low-level format can help me, but I heard, that the use of all applications for other producers can probably destroy my HARD drive. Are there only special applications of Toshiba developed for such cases? Or you can advice me something else?

  Thanks for your help!

  P.S. These applications did not help me:
  Find and Mount (can't find the HARD drive)
  Acronis Recovery Expert (does not find the HARD drive)
  OnTrack EasyRecovery Professional (does not resolve the error, but help to recovery data)
  HDD Regenerator

  Thus you get back all your important data?

  I would like to just launch Recovery to restore the HARD drive to its factory condition. If the recovery fails, you can try to delete the partitions with FDISK from a startup MS-DOS disk. Free bootdisks can be found at www.bootdisk.com

  FDISK can also repair a Master Boot Record by running this command: FDISK/MBR
  But it is not 100% reliable, it could cause more harm than good.

• In Excel 2007, copy the conditional formatting cells is very slow

  I've just upgraded to Excel 2007 (SP 2) since 2000 in the hope that it would be faster.  I have a large spreadsheet consisting of a database of about 5000 lines and a number of leaves each grids showing cells of 7 x 7 with conditional formatting in each cell.
  In 2000, I had to stop automatic recalculation.  In 2007, the recalculation is much faster, but when I created a piece of copy and past cells 7 x 7 with their conditional formatting, it is very slow and eventually is short-term memory.
  I am running XP service pack 3 on processor 1.6 ghz with 1.9 GB of ram.
  Any suggestions?

  Hello bailes2,

  Thanks for posting on the Microsoft answers Forum.

  The question you have posted is linked to Excel 2007 and would be better suited to the office community.
  Please visit the link here to find a community that will provide the support ask you

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think