Impossible to get speech recognition to start

Similar Questions

• How can I get speech recognition to type directly in the document, not in a box?

  When I use WIndows 7 speech recognition in Word 2010, I always get a box that allows a lot of words, but only a few of them to transfer to the main document.  How can I get speech recognition to add the words directly the document?

  When she pulls up the epic form so she can work on WSR sinply will not work with the document... What we do bad... y at - it sort of control admin now WSR work... WSR only works on Microsoft product documents

  You should be able to open any program, even if you can't dictate in all software. WSR only works in TSF software (Text Services framework) compatible. First of all, you should see if you can dictate in other software such as Word or Notepad. Make sure you have open WSR before any other software. If WSR works in other software but not Epic, contact Epic, and whether it is compatible to TSF. If this is not the case, your best bet is to buy and use Dragon NaturallySpeaking.

  Marty

• How can I get speech recognition to type directly in a Word Doc?

  Original title: speech recognition

  When I dictate using speech recognition there is a text box that appears in my Word doc. everything I am dictating types in the first text box and not directly in my Word Doc. How can I get speech recognition to type directly in a Word Doc?

  You can't - this is how it was manufactured to operate.  The speech not the recognition program, then send the key commands to the word, it is literally 'type' for you.

• Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

  I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

  Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

  I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

  Is there a solution to this problem yet?

• How can I get speech recognition to work with text to train my voice, the way which the tutorial done?

  The tutorial of speech recognition to train my voice is not large enough for the engine get good recognition of my voice. I want to put in place a couple random pages of text (like a novel, etc.), and that I dictate the words in the program he would coordinate the words I read with the text I was reading from and type what I read to show how he got trained.

  Here is the translation of the above using the voice recognition program.

  If this tutorial from speech recognition to train my voice is not a large enough for the motor get a good and recognition of my voice.  I want to put in place a couple random pages of text (like a novel) which does not run and I dictate the words in the program that he would coordinate the words I read the text I was reading types of what I read, that the show has done which forms

  The foregoing would take a lot of editing, which I already did a large part of. Also if you change the type of microphone that you are using, you could start any training.

  I'd be cool if (with headphones), you might get feedback that the program thought you said so that you wouldn't be constantly replay to see if it came out correctly.

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  I suggest you to see the link (it is necessary for windows 7)

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-NZ/Windows-Vista/troubleshoot-speech-recognition-problems

  Method 2:

  If you are using windows 7, I also suggest you to see the links and check.

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

  Common commands in speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/common-commands-in-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-words-in-the-speech-dictionary

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  See also:

  Setting speech options

  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

• How to get speech recognition in Windows Vista?

  I have windows vista Home premium. It is able to run windows speech recognition, and, if so, how can I get this program?

  Yes, it can.

  http://www.Microsoft.com/enable/products/windowsvista/speech.aspx

  Windows speech recognition

  http://www.Lifehack.org/articles/technology/how-to-use-Windows-Vista-speech-recognition.html

  How to use speech recognition in Windows Vista

  http://www.ehow.com/how_4549288_use-speech-recognition-Vista.html

  How to use speech recognition in Vista

  The tutorials above should help you.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get speech recognition to work?

  original title: How do I work the speech recognition? I did the exercises two times but I can't get it to move to the word and dictate.

  How to activate speech recognition in Windows 7 Home Premium. My voice patterns are in the data base of vocal percussion, but I can't activate it. What are the steps?

  Hello

  The speech recognition features are not available in Office 2010 programs, but it does not exist in Windows 7 and Windows Vista.

  For more information, see this link:

  What happened to speech recognition?

  See also:

  Use speech recognition to operate windows and programs

  Speech recognition

• Firefox loads but will not do anything, impossible to get anything either, it started 3 days ago

  21/04/2013, I was on cox.net , which is my home page. had several things reduced to a minimum and using dvd r/w
  Player when icompleted did my work, closed. yesterday tried to start fire-fox when it loaded, screen was always full not able to get looking for funmoods or the home page, could not get the buttons. The problem still exists today. When he is able to use ao some games crashed message get flash player could send report and restart, now if get msg, do it again. I have Vista Hom premium and use fire-fox
  on cox.net

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• I use 10 MSOffice and try to get speech recognition to work with MSWORD 10. How this connection or enable the job to type documents with speeches? Thank you. Ken D.

  The speech bar appears and indicates that the program is tuned, however, I can't seem to activate in MS WORD for my documents.

  The speech bar appears and indicates that the program is tuned, however, I can't seem to activate in MS WORD for my documents.

  First do the following:

  1. Click with the right button on the microphone in the WSR speech bar
  2. Click on Options
  3. Make sure there is a check mark beside "Enable dictation everywhere."

• Impossible to get Dreamweaver CC to start

  CC of Dreamweaver will not start for me in Maverick - just installed the trial to evaluate CC and DW does not work.

  Other applications in CC open hearing correct, lights of fireworks - but DW did not open at all despite uninstalling and reinstalling... icon bounces once or twice, then disappears.

  Installed Java 7, no difference.

  Another mentioned after deleting the CEPServiceManager4 folder - there is no such folder on my computer.

  I still have DW CS5 installed, thank God, so I can work, but it is a nuisance.

  Help!  Please, I beg you!

  @hippyman: Please uninstall DW and install again. When you are prompted to install Java please install from the pop-up itself.

  For detailed steps, see https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

• speech recognition - "this command is not available now"...

  I have windows 7 with office 2010 and when I try to say commands, such as select Word or correct the word or ordering another new paragraph I receive a message of this command is not available now... when it will be available? also, when dictating a sentence, if I stop it capitalizes the next word in mid-sentence... How can I fix that? and don't forget that I can't use the exact word or select Word... it took me twice as long to make this letter with speech recognition, of the type just... I read on these forums, I googled to death and please please please do not direct me to another forum... I set up my micro I did the tutorial and additional training, I looked over the options and others and I can not understand how to fix... the exact same question was asked and the person who answered just said set up the microphone, the tutorial and the additional training and as many links to forums... I clicked and traveled all the links and the answer may seem not available as to why my speech recognition accepts not my orders... Please answer and if you don't know, don't send me on a forum's wild-goose chase...

  The solution to your problem is to click the speech recognition microphone, first before you open Word.  Once the speech recognition is started, right-click it, click options, select Notepad of dictation and then open Word.  If you do it in this order, everything should work correctly in Word.  Notepad will not come to the top.  The command everything will work directly in Word itself.  If you open Word first before the speech recognition and do not have Notepad - "command not available" will come.  I hope this helps.

• Speech recognition does not recognize as a word processor Open Office

  How can I get speech recognition to let me dictate in Open Office?

  http://www.oooforum.org/

  I suggest that you ask the members on the Forums of Office Open above.
  They must have knowledge of this.

  See you soon. Mick Murphy - Microsoft partner

• We get an error "language is not supported" while tyring to start speech recognition program.

  * Original title: speech recognition a work stoppage

  When I try to start the speech, I get an error message it con could not start because the language is not supported and that the recognizer must be identical to the user interface and both are the English uk value.

  Someone at - it a response?

  Hi, Bill.

  Try this

  http://www.SevenForums.com/tutorials/179110-speech-recognition-language-configuration-not-supported-error-fix.html

  Windows speech recognition language must be identical to the language of the operating system in Windows Vista

  http://support.Microsoft.com/kb/934377

• Getting started with speech recognition problems

  I tried to use speech recognition on windows 7 but it does not recognize the new device (headset) and tells me that the language of the English of the United States, recognition does not match the language of the user interface.  Could be a missing driver and how do I get it installed.  I never had problems with windows to recognize a new device until I tried to use speech recognition.  I don't understand why I'm having a problem with the language; It will allow speech recognition to open so that I can use it.  Both are these problems related to a missing driver or could there be another reason?

  I tried to use speech recognition on windows 7 but it does not recognize the new device (headset) and tells me that the language of the English of the United States, recognition does not match the language of the user interface.

  To see what recognizer is to be used, speech recognition, open in the Panel. Click Advanced in the upper left corner of the word. Make sure that the language drop-down list Microsoft speech recognition for English system.

  To set up your microphone:

  • Right click on the speaker icon in the taskbar to bottom left. It looks like this:
    
  • In the menu when you right click the speaker, select recording devices.
  • Make sure that the microphone you use (USB, with analog connectors or built into the computer) is set as the default value.
  • Speak into the microphone. The counter to the right of your microphone volume must move up and down like you're talking about. If it is not the case, click on properties, then on levels and level to about 75% of the value.

  To learn more about WSR, do a search engine search for:

  Marty

• Speech recognition error message: "The wizard could not start."

  I want to know how to make speech recognition, but I get this message when I click on "Launch speech recognition" in the control panel.  Also get the same message when I click on 'Set Up Microphone'.

  I don't have a microphone hooked up to that time.  That I should?

  Message: The wizard cannot start.     Make sure that your audio hardware is not working properly and you check audio configuration in the control panel to control Audio devices and sound themes.
  
  I don't know what the message refers to.

  Can you help me?

  Debbie

  Of course, you must connect your microphone so that you can be the boss of your PC! ;)