Impossible to install the ESXi5.0 driver using vcli (5.0)

Similar Questions

• Dell Vostro 3550 (core i5), impossible to install the Radeon AMD driver

  Dear concern,

  When I try to install the Radeon AMD driver it does not appear compatible hardware found! But I see in the dell drivers Download Center there's AMD Radeon drivers!

  So, my laptop does not support the driver AMD Radeon! Help, please.

  Thank you.

  Look in the Device Manager - if you see two video cards listed, you do not have the AMD GPU.  If you see only one (Intel), you have only an Intel GPU.

  This system was sold with Intel only (base model) and hybrid systems (upper range models) Intel/AMD GPU.

• Tecra A5: Impossible to install the Ethernet Lan driver

  Hey,.
  A mate of mine got a Toshiba Tecra A5 and background they screwed with one of the many MSN virus - in any case, they decided to re - install windows, fine, but then downloaded the wrong driver for the network card and screwed the Mediaboot of the laptop.

  Managed to re - install again, but we cannot find any ethernet network drivers for the A5 model on the net that are recognized by the system.

  I had a direct driver from the site of Toshiba UK
  here - I extracted without problems - tried reinstalling the driver through the Device Manager and it has taken in the right direction, but does not recognize the files in the extraction point, so we don't always have our network driver.
  Don't know where to go from here, all A5 drivers that I tried to install are not recognized.

  Laptop is running XP/SP2 - model no: PTA50E-02J009EN - don't know if that helps you.

  Thanks for any help in advance, Järv

  Hello

  I can t believe that you can not install the LAN driver. You need to download the driver from this page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Then extract the files in the folder. Enter in the Device Manager, then choose the network card. Right click and install/update the driver. The source of the driver is the place where you extracted the files.

  PS: The Tecra A5 use Lan I / F chip Marvell 88E8036 (on board)
  You can also visit the marvel Web site and try to install this driver.

• Impossible to install the WiFi Hp655 driver

  Hello

  just bought HP655, fresh Win7, installed everything, but the WiFI drivers drive me crazy. The installation starts but can't finish. The window disappears. In Device manager yellow network controller. I tried the two sp56889.exe and

  sp56942.exe

  Any ideas?

  Thank you

  Thank you, Paul, that's what I have this check driver atheros, but in the driver support HP they give me Ralink driver for Hp655.Why is that?

  Thank you anywhay. Appreciated

• Impossible to install the Logitech webcam driver

  Original title: my Installer is corrupt what can I do to fix this

  I tried to install the driver of webcam logitech (c525) and says Error Installer is corrupt and the file may contain a virus

  Hi Jey,

  The short answer is to download a new driver from a reliable source. Go to this page: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/23684/section/troubleshoot/crid/405/lt_product_id/7794/tabs/1, 3,2,4, EN 5/cl/us. In order to download the correct driver, please note if you are running a version 64 or 32 Bit of Windows 7 deep. To do this go to the Control Panel, select system and when this window opens, go to the system type: line.

  Download and install the right software for your camera. Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Impossible to install the USB/mouse driver

  I recently was unable to use my external mouse. Similarly, I was unable to use USB keys.

  Whenever I plug in a 'sound' in the registers of the computer as a USB is detected, but the driver cannot be installed.

  In Device Manager", the USB/mouse device appears with a yellow exclamation point, which specifies that it is Error 52 - cannot verify the digital signature.

  I tried to use 'Device Manager' to uninstall and reinstall, but without success. Similarly, I tried the 'Microsoft Fix it' program ' with similar results.

  The computer is running Windows 7 with a 64-bit operating system.

  Any help would be greatly appreciated!

  James

  Hi James,

  1. what fixit from microsoft that you ran on the computer?
  2. What is the brand and model of the mouse?
  3 did you do changes on the computer before the show?

  Code 52 says, Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  See the article for more information.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us

  I would like you see below and follow the suggestions in the article.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-CA/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Additional information:

  Please refer to the suggestions of Gokul T answered the 10 March 2010

  Error code 52 - USB ports not recognizing not connected USB devices, declaring that "Windows cannot verify the digital signature for the drivers required for this device.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Impossible to install the Bluetooth device driver

  A few times I had to reinstall my Bluetooth device driver, because it stopped working.  Through the Device Manager, it shows a yellow exclamation mark next to the device.  Previously I uninstalled the device and then conducted a material analysis and the unit is back in place.

  This time, I said to uninstall the driver wait for the o/s to find the drivers.  He did well.  So now, I'm sitting here with the projection of Bluetooth device as unknown.  I said to find the driver online, and he said: he did not find any.  So, how I pray not tell to get my Bluetooth driver install now?  Thank you!

  Never mind.  Had the driver on the manufacturer's Web site.

• Satellite P300-1 c 7 - impossible to install the audio driver

  Hello!
  I need help!

  I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found.

  Could you please tell me why this error occurs?
  Thank you.

  You have installed all the service packs for Windows XP?

  Satellite P300-1 c 7 belongs to the series PSPC4E then you have chosen the right model?
  Check again!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you installed the chipset front driver?

• Impossible to install the graphics driver

  Hi I have Windows 8 pro instaled in HP Pavilion 15-n240tx and when I try to install the NVIDIA graphics driver, it says I must first install Intel (r). When I try to install HD graphics drivers on the site it says no minimum requirement to install the driver. How can I fix tis

  Hello:

  See if it works...

  First install the Intel Chipset Driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng

  Then, install the Intel HD graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714

  Then, install the graphics driver nVidia and restart.

  http://www.nvidia.com/download/driverResults.aspx/77228/en-us

• Impossible to install the latest version of the Realtek Audio worm 6.0.1.7737, A04 on Dell XPS 15 9550 driver

  Question cannot install the latest recommended driver Audio Realtek worm 6.0.1.7737, A04

  When you point to the location of the driver is generic message > "Windows has determined the software driver for your device is up to date.

  "Windows has determined the driver software for your device is up to date.

  The only option is to close the window and driver has yet to show:

  ######################

  Driver provider: Microsoft

  Driver date: 29/10/2015

  Driver version: 10.0.10586.0

  Digital signer: Microsoft Windows

  #############################

  Please help on this greatly appreciated

  possibly due to digital signature driver if yes what would perhaps ways to do a work around.

  Thank you

  "Windows has determined the driver software for your device is up to date.

  Watch Manager devices under sound, video, game controllers section for the Realtek High Definition Audio device and see what he says here insofar as the driver information. This is where the real driver info. Do not look into the audio inputs and outputs.

  JohnD

• Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

  Hello.

  Another problem.
  When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
  Whenever the error message: the driver is not validated by your system, please contact your producer.

  So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

  Hi mate

  You can install this driver, but you need to use different installation procedure.
  You must install it in the Device Manager.

  Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

  But note; I read here that the use of non-Toshiba drivers is always at your own risk

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• When I plug my new Seagate Free Agent Desk GoFlex external drive, I get an error message saying that Windows does not recognize the hardware. I'm stuck and need help to install the external hard drive.

  My problem is that the software is supposed to be on the disk but I do not see the player to download. I tried to download the Seagate Manager, but it shows no available disks. Any help will be most appreciated.

  Also, I tried to install the external hard drive on a Windows Vista 64-bit computer and a Windows 7 Home Premium 64-bit.  Same result on both.

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.