Impossible to install the new SAS card in PCI on Dell r720xd housing

Similar Questions

• HP ProLiant ML310e Gen8 v2: impossible to activate the new graphics card

  I need to install a new graphics card on a HP ProLiant ML310 Gen3 of v2 server as edge one is a failure.

  Card - EVGA GeForce 8400 GS

  During the installation startup BIOS hangs after the initial check (100% / no errors) and remains at a black screen indefinitely instead of forward to the ProLiant logo boot before windows.

  Therefore, I am unable to enter the bios to enable the PCI 16 slot.

  Before the system LED flashes red at this point.

  Any help will be appreciated.

  Hello:

  You can also ask your question on the Business - section ML servers HP Support Forum.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VV9KLDjbLGg

• Is satellite A10 - possible to install the new graphics card?

  Hello

  I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.

  I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.

  I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.

  If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.

  the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?

  Thank you

  HI Jeff,

  In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.

  At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.

  In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.

  http://www.OmegaDrivers.NET/

  Kind regards

• Install the new video card

  I have a HP Pavilion m7500y PC running Windows XP. I would like to install a new video card to display on both monitors. Installing a video card is possible with this machine? The card I have has a VGA, HDMI and a DVI input connection. If possible, do I need anything special to install and use this card? Thank you for your help.

  I wouldn't worry the food until the video card is selected.  Decide if a new power supply is needed.  Many new cards high power have a 'special' which will have all the power supplies.  According to the map, adapters for power fittings may come with the card.  A respected power supply name is Cosair, Antec, or Thermalake, but many are just as reliable at the best prices.

• Impossible to install the new Tempro V2.2

  You are prompted to install the new version of Tempro (V2.2). Installation is finished and asked to view and accept the privacy policy. MsDos screen appears with Temprolauncher.exe. Then I went to accept privacy policy screen again.

  Is there a solution to this problem?

  Hi tonymc01,

  Did you remove the old version of Tempro before installing a new? If this isn't the case, you should do it. Take a look in Control Panel > software to remove the old version first. Then, restart the computer and install the new version.

  Check this box!

• Impossible to install the new drivers - Satellite 2450 (Win XP home)

  After downloading and unzipping, I find that I can't install the new drivers (energy saving). the Setup program stops and shows the end of messages being unable to run the command.

  Hello

  What exactly Satellite 2450-xxx model do you have?
  I asked it because I found that many models of 2450 with versions of Eve different power on the driver Toshiba download section.
  Please make sure that you install the correct version

• Impossible to install the new 4 G USB modem error lack driver bwbcmwin32installer_2.10.6.msi

  Original title: lack of pilot bwbcmwin32installer_2.10.6.msi

  Hello community!

  I encountered this problem: (I'm in Oz)

  all by installing the new modem USB 4 GB (above the required windows driver error message) wouldn't load the Device Manager software.

  I found later talk to telco support that the previous version of the software (3G network) must be uninstalled (not so advised in the documentation provided with the device)

  The next attempt to uninstall the old software has failed (what a surprise displayed the same error message as mentioned above)

  Tried to use the old device and now it don't work either.

  Y at - it a good soul out there that will help please (it's no surprise that telstra has been giving me the run around for 2 weeks now)

  Hi IVsWebBrowserUser,

  Welcome to Microsoft communities. The problem description, I understand that you are not able to install the new 4 GB USB modem. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         The question is limited to this device?

  Follow these methods.

  Method 1: Try to use the USB device to a different USB port and verify.

  Method 2: Try to use the USB device on another computer.

  Method 3: Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Let us know if you need more assistance.

  Thank you.

• Satellite A100-003: Impossible to install the new driver NVidia of the Toshiba site

  I download new driver for nvidia from the toshiba site graphics card, but when I try to install it, I get answer that didn't find any supported video card.

  I have install the driver for laptop A100-003.

  Hello

  This sounds really weird. Are you sure to you´ve downloaded the correct drivers for your computer? What system do you have? XP or Vista?
  Maybe you´ve downloaded a version of Vista, and you have XP. It would be useful and enjoyable if say you what system you have.

  Alternatively, you can visit this site:
  http://www.laptopvideo2go.com/

  You will find the latest drivers who must work. But be careful before you install something and read the FAQ section on the site!

  Good luck and good weekend

• Don't buy used iPhone 4s, prechecked IMEI whicated it was NOT stolen, however I had no idea of locking Activation. I did buy and install the new sim card, but I'm locked out. New Sim Card would make a difference? Original owner cannot know

  The installation of a new Sim Card would affect the ability to unlock Remote Activation?

  I bought a used iPhone 4s, prechecked IMEI number, which indicated that it was not stolen, but I had no idea on the lock activation. Former owner is willing to work, but can't figure out what to do (I emailed the help pages Apple), would be the fact that I have installed the Sim Card have affected something

  Locking activation is a feature of security built into iOS. Please seethis support document to learn more about locking Activation.

  My suggestion would be to contact the original owner and ask him to enter the identifier Apple and password so that you can disable find my iPhone.

  I hope this helps.

• Pavilion HPE h8 - 1090d: impossible to install the new Asus GT730 2Go on Pavilion HPE h8 - 1090d

  Dear team,

  Recently I found the display card which gives problems, so I purchased a new Asus GT730 card 2 GB display. In the start screen, it displays only HP logo, beep, wait a while... .single beep new... wait... .single don't beep... no display on the screen already.

  I know the new incompatible display in this PC? How can I test it?

  I'll appreciate for your good answer.

  Kind regards

  Tflai, welcome to the forum.

  The GT 730 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to add UEFI to the motherboard.  The last series of video cards that does not need UEFI was 640 gt.  I suggest you contact the manufacturer's Technical Support to help choose the best card for your computer.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Re: Satellite L100-179. impossible to activate the new WLan card inserted

  Hi all

  I bought a computer laptop satellite L100-179 wireless about 2.5 years ago.
  Last week I bought an Inter (R) PRO/Wireless 2915ABG Network Connection, this is an internal card!

  I installed the card and the latest drivers and the card worked properly under Device Manager
  When I tried to use the card after setting the wireless settings, I started to have problems.

  I then installed the software for the card help with the problem which has been the software Intel(r) PROSet/Wireless WiFi 12.1.2.0 that gave me a little more information about the problem. All the settings for the wifi are enabled except when I press Fn + F8 I get the following message:

  Wireless communication is disabled. Please turn on the wireless switch.

  But there is no switch on the side of the laptop just a plug of cache.
  I've ran out of ideas to get this working and would be really grateful for the help.
  My OS is XP home SP3.

  Hello

  I think that your Sat L100-179 is not extensible WLan.
  If this laptop has been delivered without the WLan card and the WLan switch does not exist, then you cannot use an internal WLan card!

  In this case, go to an external solution such as a USB WiFi key for example

  Welcome them

• How to install the new graphics card due to the absence of HDMI Port

  I have an old laptop, and I want to connect it to my HD TV. Problem with that is that I don't have an HDMI Port. I noticed on a similar question that you responded that it might be useful to consider the insertion of a new graphics card. As I have never opened a laptop before, I was wondering if it is fairly simple to do this, (as anyone who could do it) or if I'd rather pay someone to do it?

  You can use something like this:

  http://Aluratek.com/USB-to-HDMI-1080p-adapter-with-audio

  or Google "USB to HDMI" of many other and different price ranges. Don't forget to look at the comments of consumers before buying something like this. They all promise of greatness, but I'm sure few deliver.

  SC Tom

• Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

  I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

  (1) download the driver on the internet instead of the installation CD.

  2) with the help of msconfig with selective startup and disabled all programs except Microsoft.

  (3) creates the new administrator account and returned through it all.

  (4) turned off firewall and anti-virus

  The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
  Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Impossible to install the new Windows XP Home edition from scratch on Tecra S3

  With F6 in WXP install driver Toshiba raid (from USB floppy drive) properly installed first, partionating disc ok, continue to install Windows XP Home edition.
  WXP wants then again Toshiba raid drivers, installing WXP because he's not reading USB floppy (undirected). Do I need the recovery CD that I don't have.

  Hi guys

  I had a similar problem installing RAID on my old Qosmio.
  I didn't use the restore CD but the simple Microsoft Windows Boot CD.
  The problem was my incorrect installation procedure.

  After the installation of the driver the USB FDD drive RAID, the configuration of the installation works fine until I formatted the HARD drive or partition.
  This has been bad! Don't format or delete the partition after installing the RAID driver!

  In addition, make sure you use the right set of RAID! These settings can be checked in the BIOS! My Qosmio user manual provides lots of information about RAID. Did you check your user manual which settings are required to install the OS of Win CD?

  Do and good luck!

• Impossible to install the new OS energy saver

  Hello

  I have problems with Toshiba Power Saver.
  I bought my laptop in Austria with windows German. But I installed the English version and it came the problem. Everything worked except 2 utilities. I tried to install from the recovery CD, but they does not work.

  So I installed Toshiba power saver, but it did not run. When I click on Control Panel and Toshiba power saver comes the message:
  "Cannot be opened because you do not have access rights to run Toshiba Power Saver" I am logged on as administrator.

  So, I don't know. I tried to download on the internet, but the problem remains. In XP media center edition German, everything works, but in my XP with SP2 not.

  Hi Raymon

  In my opinion you should post at first what model of laptop, you have exactly.

  In any case, for the installation of simple tools and utilities not use CD recovery given the image of the installations. For utilities or simple tools, you can use the Tools & Utilities CD or download it from the download page.

  If I understand your ad directly the energy saver is preinstalled on your device, but you can't use it. Because of this, you should not attempt to go back. Please do not forget that you logged in as an administrator and not a user with limited permissions.

  I tested it on my device and only if I am logged in as a limited user can't launch energy-saving. As an administrator, I can do what I want.