HP ProLiant ML310e Gen8 v2: impossible to activate the new graphics card

Similar Questions

• Re: Satellite L100-179. impossible to activate the new WLan card inserted

  Hi all

  I bought a computer laptop satellite L100-179 wireless about 2.5 years ago.
  Last week I bought an Inter (R) PRO/Wireless 2915ABG Network Connection, this is an internal card!

  I installed the card and the latest drivers and the card worked properly under Device Manager
  When I tried to use the card after setting the wireless settings, I started to have problems.

  I then installed the software for the card help with the problem which has been the software Intel(r) PROSet/Wireless WiFi 12.1.2.0 that gave me a little more information about the problem. All the settings for the wifi are enabled except when I press Fn + F8 I get the following message:

  Wireless communication is disabled. Please turn on the wireless switch.

  But there is no switch on the side of the laptop just a plug of cache.
  I've ran out of ideas to get this working and would be really grateful for the help.
  My OS is XP home SP3.

  Hello

  I think that your Sat L100-179 is not extensible WLan.
  If this laptop has been delivered without the WLan card and the WLan switch does not exist, then you cannot use an internal WLan card!

  In this case, go to an external solution such as a USB WiFi key for example

  Welcome them

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• Satellite L650 - 1 M 0: could not activate the new wireless card

  Hello

  I replaced the wireless card in the laptop on WiFi + BT (Combo). New brand of laptop do not had favor of BT
  Bluetooth and WiFi work correctly on the system drivers that the system itself.

  The only problem with the new adapter is unable to activate or disable the network modules.
  Since my laptop does not support default BT will automatically turn off the controller module.

  WiFi must be turned off and as in the previous card - a function key. Unfortunately, wireless in the function bar option has disappeared, and the FN + F8 key combination does nothing. Responsible for the light WiFi is on all the time.

  It is possible to activate the WiFi module as before?
  Very please help!

  Laptop: TOSHIBA L650 1 M 0
  The new network adapter: BCM94313HMGB

  Sorry for my bad English.
  I used the Google Translator because I can't speak English. Only the Polish language ;)

  > Is it possible to activate the WiFi module as before?

  You have replaced the WLan module, which means that the hardware configuration has been changed. This means that the different module has affected the functionality of the software.

  The new WLan/BT BCM94313HMGB combo card seems to be designed by Broadcom.
  Of my knowledge that supports most of the laptops Toshiba Intel / modules Realtek or Atheros. This is why I think there may be a compatibility problem between the FN key software and this module.

  Maybe you can try to install the Broadcom driver once more to check if this can help, if not you will have to renounce that.

• Impossible to activate the new installation of Windows 7

  I've done several installs clean on this computer without problem. This time, I'm unable to activate my copy of Windows 7

  Code: 0xC004C008
  Description: The activation server determined that the specific product key could not be used.
  James

  After windows has been activated on the internet a few times, he trips a switch and requires activation by telephone - the switch is reset, as I understand it.

  If you have the habit of frequently reinstall, your best option is to take an image of the system the system completely installed and updated before you do anything with him-, and then reinstall the. This avoids the necessities of activation, update and reconfiguration.

• Impossible to install the new SAS card in PCI on Dell r720xd housing

  We have a Dell r720xd server and we are trying to expand storage on the server by using new PowerVault MD1200 containing 12 discs 2.5 ". The problem is when we install card SAS on the PCI Slot, the server does not load correctly and stuck on the below error. We tried to replace with a new card SAS, new card Assembly and even the motherboard. But server is stuck on the screen below. At the moment where you take this card SAS, server looks good and start very well. Please suggest to proceed.

  ================================================================================

  PCI Express Error interrupt at EC00:11B8
  Type (S)hut off NMI, (R)eboot, other keys to continue
  

  What model of card SAS was installed and in which PCI slot?

• How to activate the onboard graphics on a cartridge to calculate UCSME-1414?

  I have a UCSME-1414 calculate the part of the cartridge to a UCS 4308 chassis. This cartridge contains a CPU with Integrated GPU that can be used to accelerate video processing. To use it, I need to activate the "Integrated graphics" option in the BIOS, but it is grayed out (see screenshot) and I'm unable to change the option.

  Is there a way to activate the integrated graphics card?

  Thank you!

  You attempted to set this value to enabled in the BIOS UCS Manager strategy? You can also set the CLI:

  one

  

  HTH,

  Wes

• HP proliant ml310e gen8: can't the Nic Server 2012 team

  Hello everyone hope everyone is great

  I have a hp proliant gen8 ml310e I have a problem, do the 2 Nic set interfaces

  I tried 3drivers the

  1 Microsoft driver by default with windows server 2012

  2 broadcom driver the latest driver directly from the Broadcom website

  3 hp driver from the drivers from the Hp site for this model

  When I go and try to create a Nic team a mistake occurres and Nic fails creative team I also tried doing it through power shell operation has expired: TeamNic installation has not completed on time.

  I tried a clean format

  System specs

  HP proliant ml310e gen8

  Broadcom NetXtreme Gigabit

  Server Windows 2012

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.

  http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vp1hReT2bGg

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi