Impossible to pass the BIOS back to 2.28 (Aspire E1 - 731)

Similar Questions

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• Pavilion a1710n impossible to enter the BIOS from the put in new hard drive

  I have a HP Pavilion a1710n desktop initially under Vista Home Premium.  Problem is hard disk came out, I then replaced with a hard drive Western Digital SATA of similar type.  However, now I am unable to enter BIOS using F10 or Escape or by pressing the F1 key turning on the PC.  When I tried to put Vista on the PC, it stopped and gave me an error 0 x 80070002; Lack of D:\Sources\Installation, which I do not know what it means exactly or how to fix it.  I had already updated the Vista Home Premium to Win7 Pro.  Given that the disc is a disc update of Win7, guess I'll have to reinstall Vista first and then update again to Win7 Pro?  At the moment everything I have on the PC is the new hard drive without any Windows operating system and my PC doesn't seem to be reading the new hard drive, I think, and in the Start Menu, it is shown as 3rd master drive and DVD is 2nd Master.  So what happened the 1st master?  No what should be my new hard drive?  I'm always so frustrated and of course, my PC is long out of warranty, although I tried calling support without much help I'm afraid.  Any help would be greatly appreciated.

  Hello again patticat22,

  Thank you for responding to my message. If I understand your reference Bravo you check to see if you can find a solution? If and it would be better to search for accepted Solutions because they are used to indicate that a solution has been found, where a Bravo must indicate appreciate for a position.

  As for your question, I think it could be a drive for the failure of the installation that you have and recommend you order another set. I'm you provide a link to the HP Support document: looking for HP recovery discs or a USB HP recovery disk?, which has all the necessary steps to guide you through the ordering a new set of recovery disks. There may be a fee for ordering them, but I think this will solve your problem and get your computer back operational.

  So you can try to use the HP support document: removing and replacing the CMOS battery, that you want to remove the battery (keep out 24 hours before putting it again) and put it back. This should clear your BIOS and reset back to factory. If the BIOS is still inaccessible after that, I think it would be best if you contacted technical support HP for repair options.
  
  United States supports Contact link options HP products purchased in the United States.
  Outside WE support link to connect with options for HP products purchased outside the United States.
  
  Please re-post though I have well understood you or if you need additional support. Thanks for posting on the HP Forums. Have a great weekend!

• Impossible to update the BIOS on Satellite L40 - 14 H

  Hi, guys!

  I'm actually use portable L40 - 14 H with BIOS 5, 40 - WIN (for XP). Back to Vista x 64 I have try several times to update BIOS to 1, 90 - WIN (for Vista) in Windows mode, but nothing...

  Any ideas how to do without floppy USB drive?

  Hello

  The BIOS you want supports the Vista 32 bit and not 64-bit update. Therefore, it doesn t work!

  > Do you know the difference between 5 and 1, 40 - WIN (for XP), 90 - WIN (for Vista)?
  One is for Vista and one for XP ;) there is a difference!

• HP ENVY spectrum XT impossible to install the BIOS update (processors intel)

  The name of the product of my laptop is HP ENVY spectrum XT and it runs on Windows 7 Home Premium 64-bit and its serial number is CND2340MHX, a notification came in the Wizard support for hp advising me on the BIOS update, when I click on the download and install it downloads the installation file but does not install it and when I checked the action record States that it is impossible to install. Is there a reason to fail?

  Hello Moodster1994,

  Please take a look at this document, which provides for the restoration of your BIOS troubleshooting steps.  Please let me know if this helps solve your problem.

  Good luck!

• Impossible to update the BIOS on my Satellite A660

  Hello, guys!
  When I try to update the BIOS on my laptop in version 2.3 (latest version 1.6) I get the message "install UEFI winflash 0.02:

  + The program will be closed! +
  + There is an error occurred, please check below Articles. +
  + The BIOS above 230 version. +
  + More than 20% of battery capacity. +
  + Is attached AC. +

  The conditions of the first and the last are rooms but the second is not because the battery is dead (always 0% charged). Is there another way to update the BIOS?
  Thank you!

  Post edited by: al_3

  No, there is no other update BIOS because victory BIOS update version is available on the Toshiba driver website.

  I guess you need good work and battery charge in order to update the BIOS.

  But why you want to update the BIOS? Is something wrong with the laptop?
  The update of the BIOS is a very serious update and must be done very carefully
  Incorrect procedure may damage the motherboard!

• Re: Satellite P100-106 - how to pass the BIOS?

  Hello

  I'm trying to downgrade the BIOS on my P100-106 of 4.80 to the 3.30 original but I don't have a copy of it. No matter who or where it is available?

  (Please note I looked already http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=P100&x=0&y=0 and these BIOS are NOT for the P100-106)

  your

  Hey,.

  It seems that you have a European model for laptop and so you need to download all the drivers and tools of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com

  But it seems that he not there no old version available for your laptop BIOS because you can download the newest one.
  You must contact an authorized service provider and ask the guy if you have an older version of BIOS.

  But why you want to downgrade it?

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?

• Satellite C660 - how to pass the BIOS?

  I have the same problem. Latest version of BIOS for my laptop is 1.3, but on my 1.4 is installed? Laptop is 10 days and I can't work with it.

  We have a few C660 (PSC0LE), we bought tham the same day and they all have 1.3 and perfect work. Only my are BIOS 1.4 version and it of not good at all.

  Please, I beg you, my question is how do I Flash BIOS with 1.3?

  Hello

  Why did you create an additional thread on BIOS? I want to say that this can be discussed in your other thread too.

  Anyway: the BIOS Downgrade is not possible and can be done a service allowed in your country. Latest Toshiba site only version is available, so a downgrade is not possible.

• Impossible to update the BIOS on Satellite Pro C

  Hello

  Tried to update my bios version 1.90 but failed due to the following message:
  Message in the window "install UEFI winflash 0.02.

  There is an error occurred, please check the items below.
  Bio version above 190.
  Battery capacity more than 10%.
  AC is attached
  Program will be closed.

  Thanks for any help

  What model of laptop do you have?
  What is the reason for the update of the BIOS?

  You have problems with your laptop and you want to fix the BIOS update?

• Impossible to download the BIOS for Portege Z930 - 404 error

  Hello

  My tool tempro says that there is a new BIOS for my Portege Z930.
  But the link does nothing.

  If anyone can solve this? Or have the correct link

  Thank you
  Markus

  You can use this direct link to download the BIOS file
  [Update BIOS 6.80 - WIN for Portege Z930 | http://support.toshiba-tro.de/tedd-files2/0/bios-20140212101921.zip]

• Impossible to update the BIOS on my Satellite L750-1MD

  Hello!

  I want to update my BIOS which is v.240 now. I DLed the latest version at the official site (311 I think).
  I did pay attention to the numbers when I select one for my laptop.

  When I try to update it - it begins to do message not not to have apps on and not restart or put in hybernation appears and then it stops. Then he tries to launch windows - W 7 Edition Home Premium, and windows once, everything becomes a black screen with a cursor.

  Cursor can me moved but it lost during 10 minutes there.
  After that I had to reboot to get rid of the black screen. I tried again later.
  Same result. And I checked my bios version - there are still 240. :(

  What should I do? Thank you!

  Hello

  Before you run an update of the BIOS, the antivirus and other security applications must be disabled. Also, make sure that nothing is running in the background.

  In addition the VAP (value added package) must be installed. I recommend the update to this package too.

• Impossible to update the BIOS on Equium L350

  I tried updating the BIOS on my laptop but when I run the update I get the message "the ROM file is not newer than the BIOS. I've updated all the others drivers drivers optical drive, when I run the update to do this I get the messagae that they are not compatible, even if I download the correct one for my model.

  Any ideas please?

  Sorry my friend, but I do not understand what you want to hear now. It seems that you are a fanatic of the update ;) Just a joke!

  As you can see it the downloaded version of BIOS is not an end of history was updated.
  Driver optical drive? Can you please tell me what it is? What is the name and version of the file that you want to install?

• Impossible to update the bios

  I bought the laptop on ebay (the portable school was) battery does not charge but shows connected, I get the message that it is the result of the outdated bios (A00 updating is A06). I tried to update the bios, but the first problem was no image of the system.  I did it.  I did auspices try to update bios, this time bios tbe will not update because of the battery is not not charghed at 10%. I can not load the battery.

  Is it possible to update the bios, or should I get another battery?

  I got in touch with sales of battery problem before all this and got a new battery by recommendation of sellers. There no awareness of this problem, the battery WAS at 50% charged.  I have no problem with the purchase of another battery if there is no other way.

  Check if the power adapter is recognized by the system (F2 at startup).  If it is not, battery does not charge.

  If the adapter is not recognized, it is not a BIOS problem - try a new Dell OEM adapter first.  If this does not solve the problem, and the DC Jack is replaceable, replace the DC Jack in the system.  In the case of a model where the CC is not replaceable or replacement Plug does not solve the problem, the motherboard should be replaced.